Potravinarstvo Slovak Journal of Food Sciences
Not a member yet
1254 research outputs found
Sort by
Monitoring of risk factors of cardiovascular diseases in adult men
Get PDFThe study aims to evaluate the monitoring of risk factors of cardiovascular diseases in the young population, which significantly contribute to the origin and development of cardiovascular diseases, such as peripheral artery diseases, atherosclerosis, stroke, and others. We focused on a group of young adult men (n = 110) in the age range of 30 to 50 years, which we selected from the database of 800 patients hospitalized in the Cardio Center in Nitra during 2010 – 2020. When evaluating the influence of meat products consumption frequency on biochemical parameters and BMI, we recorded a statistically significant effect at the level of p <0.05 in the evaluation of meat products such as salami, brawn, and sausages. When consuming sausages, BMI values also increased with increasing frequency of consumption. The effect on BMI was also observed when eating salami, between consuming 1 – 2 times a week and not at all. We recorded a statistically significant effect (p <0.05) in frequent consumption of brawn (1 – 2 weeks) on the level of HDL cholesterol. The most frequent fish consumption was 1 – 2 times a month for freshwater (51.8%) and marine fish (56.3%). Daily consumption of fruit was reported in 64.6% of men, while daily consumption of vegetables was recorded in only 44.6% of men. In the lifestyle assessment, we focused on probands' time spent on physical activity. Only 35.5% of men stated that they spend more than an hour a day on physical activity. 40% of men from the surveyed respondents were active smokers. Another risk factor for cardiovascular diseases is stress, which significantly affected up to 42.7% of respondents. Nutrition and lifestyle play an important role in the prevention of cardiovascular diseases, which significantly affect blood lipid parameters, vascular endothelial elasticity, and factors determining the etiopathogenesis of cardiovascular diseases
Influence of rootstocks on the productivity and chemical composition of Prunus domestica L. fruits
Get PDFThe influence of seedling and clonal rootstocks of different spreads on Prunus domestica L. plum fruits quality and productivity of Yaichnaya Sinyaya and Utro varieties was studied. The significant change of productivity and the fruit weight of the varieties under study was to determine under the influence of the rootstock. Depending on the scion-stock combination the plum tree's productivity varied from 7.5 kg/tr. (Utro/140-1) to 15.1 kg/tr. (Yаichnaya Sinyaya /Novinka) at the mean value of 11.5 kg/tr. Medium-growing rootstocks Novinka and OPA-15-2 provided the maximum value of the varieties productivity The significant productivity decrease relatively to seedling rootstock was stated for the combinations with low-growing rootstock 140-1. Soluble solids content in the fruits of Yаichnaya Sinyaya variety is higher than in the fruits of Utro variety, moreover, the highest values were determined on Novinka and OPA-15-2 rootstocks: on 4 – 4.5% higher in comparison with the fruits on the seeding rootstock at average. The rootstock causes less influence on titratable acids. The antioxidant activity of Yаichnaya Sinyaya variety fruits is 30% higher than that of Utro variety fruits on average. The maximum values of antioxidant activity in Yаichnaya Sinyaya variety fruits were fixed on OPA-15-2 rootstock (16.37%), the minimal ones – on Skorospelka Krasnaya rootstocks (14.68%). In the fruits of Utro variety the highest values were stated on OP-23-23 rootstock (13.16%), and the lowest ones – on the seedling rootstock (10.93%). The content of phenolic compounds sum is 60% higher in the fruits of Yаichnaya Sinyaya variety than in Utro variety ones on average. The decrease of the content of phenolic compounds sum was stated in the fruits of Utro variety on all the rootstocks in comparison with the combination Utro/seedling rootstock. The decreasing series of ash elements accumulation (K > P > Ca > Mg > Mo > S > Zn > Si) was determined. The strongest variety differences on total mineral element content were overvalued on medium-growing clonal rootstocks (Novinka, OP-23-23 and OPA-15-2). OPA-15-2 and OP-23-23 rootstocks provided the highest fruit quality on the combination of economic and biochemical parameters
Antibiofilm and antioxidant activity of Rosmarinus officinalis essential oil
Get PDFThe aim of the work was to explore the antioxidant potential and antibiofilm activity of the Rosmarinus officinalis essential oil. The DPPH method was used to determine the antioxidant activity. The agar microdilution method was used to determine the minimum biofilm inhibiting concentration (MBIC). The MALDI-TOF MS Biotyper was used to evaluate the antibiofilm activity on the wood and glass surface. Vapor phase antimicrobial analysis was used to determine the effect on the food model. The antioxidant activity was 28.76 % ± 2.68 %. The MBIC for Stenotrophomonas maltophilia was 25 µL.mL-1 and for Bacillus subtilis 12.5 µL.mL-1. Analysis of the mass spectra of S. maltophilia revealed an inhibitory effect from the 5th, which persisted until the end of the experiment. Analysis of the mass spectra of B. subtilis showed an inhibitory effect from the 7th of the experiment. The experiments showed an effect on both tested surfaces. The food model showed a more pronounced effect of the Rosmarinus officinalis essential oil against B. subtilis. We assume that the effect of the essential oil is to disrupt the polysaccharide structure of the biofilm and consequently reduce the resistance of the biofilm. We have established that MALDI-TOF MS Biotyper is a suitable tool for evaluating changes in biofilm structure and could find more significant application for the study of biofilms in food and clinical practice
Optimization of brewing time and temperature for caffeine and tannin levels in Dampit coffee leaf tea of Robusta (Coffea canephora) and Liberica (Coffea liberica)
Get PDFCoffee constitutes a plant product high in economic value. Extremely abundant throughout Indonesia, different varieties can be found in each region. Coffee leaves represent a by-product of coffee production which are disposed of without being subjected to further processing. One advantage of coffee leaf waste is that it can be made into coffee leaf tea, to prevent various diseases. The caffeine and tannin content can be optimized by temperature and brewing time. Research on coffee leaf tea remains limited, with little study of Liberica coffee leaf tea. This investigation was to determine the optimal brewing time and temperature of Robusta (Coffea canephora) and Liberica (Coffea liberica) coffee leaf tea. This research used the Response Surface Methodology (RSM) method with Central Composite Design (CCD). Data analysis using RSM method was conducted incorporating two factors. The first factor was the brewing temperature with a minimum value of 91 °C and a maximum value of 99 °C. The second factor was brewing time with minimum and maximum values of three and seven minutes respectively. Identifying the optimal treatment was based on two factors, caffeine and tannin content. Optimized processes were applied to conduct organoleptic tests on 110 untrained panelists using the Rate-All-That-Apply (RATA) method to highlight the majority attributes experienced by the panelists. The optimal brewing temperature and duration for robusta coffee leaf tea were 93.43 °C and 4.80 minutes which produced caffeine and tannin levels of 74.90 mg.100mL-1 and 293.01 µg.g-1 respectively. In contrast, in the case of Liberica coffee leaf tea, the optimal brewing conditions comprised a temperature of 91.65 °C and duration of 4.84 minutes which produced caffeine and tannin levels of 72.52 mg.100mL-1 and 415.87 µg.g-1. Results of sensory analysis showed that the majority produced five significant characteristics, namely: sweet flavor, fire flavor, sweet taste, bitter taste and astringent mouthfeel
The effect of processed Tempeh gembus to high sensitivity c-reactive protein (hsCRP) and high-density lipoprotein (HDL) levels in women with obesity
Get PDFObesity causes chronic inflammatory reaction is characterized by elevated levels of high sensitivity c-reactive protein (hscrp). Hscrp and hdl could be used as an early marker of cardiovascular disease risk. Tempeh gembus contain fiber, unsaturated fatty acids and antioxidants, which can reduce the inflammatory reaction. This study determines the effect of processed Tempeh gembus on hsCRP and HDL in obese women. This study included in experimental studies with randomized post-test only control group design involving 40 obese women aged 20 – 50 years. Subjects were randomized into two groups: a control group was given a standard diet low in calories 30 calories/kg body weight, and the treatment group was given a standard diet low in calories 30 calories/kg body weight and Tempeh gembus for 28 days. hsCRP and HDL levels were measured before and after the intervention, food intake was measured by using a 3 x 24-hour recall and physical activity (IPAQ form). HsCRP levels were measured using the ELISA method, whereas HDL levels were measured using the CHOD-PAP method. Wilcoxon test (hsCRP levels) and paired t-test (HDL levels) used to test differeces before and after intervention each group. Mann Whitney test (hsCRP levels) and independent sample test (HDL levels) used to test differeces before and after intervention between groups. There are differences in hsCRP levels before and after the intervention in the control group (p = 0.00) and the treatment group (p = 0.00). There are differences in HDL levels before and after the intervention in the control group (p = 0.00) and the treatment group (p = 0.00). There are differences in the decrease hsCRP levels between the two groups (p = 0.00). There are differences in the increase in HDL levels between the two groups (p = 0.03). Tempeh gembus 150 grams/day can decrease hsCRP levels and increase HDL levels in women with obesity
Shelf life of tempeh processed with sub-supercritical carbon dioxides
Get PDFTempeh, a fermented soybean-based food originally from Indonesia, is a remarkably nutritious functional food with health benefits. Unfortunately, tempeh is highly perishable, with a shelf life of 24 – 48 hours. The goal of this research was to evaluate the possibility of a sub-supercritical CO2 technique to increase the shelf life of tempeh by measuring the changes in the L* (lightness) value and texture of tempeh via application of a kinetic approach and, based on the observations, to estimate its shelf life. Tempeh was processed with sub-supercritical CO2 at 6.3 MPa for 10 min, then together with unprocessed tempeh (control), stored for 5 days at temperatures of 20, 30 and 40 °C. The Accelerated Self-Life Test (ASLT) with the Arrhenius model was used to measure the shelf life of processed and control tempeh. The calculated shelf life of processed tempeh using the ASLT by the Arrhenius method was 2.43 days at 20 °C, 3.7 days at 30 °C and 1.4 days at 40 °C, and the shelf life of unprocessed tempeh was 3.33 days at 20 °C, 2.90 days at 30 °C and 2.56 days at 40 °C. The conclusion was that the use of sub-supercritical CO2 at 6.3 MPa for 10 min increased the shelf life of tempeh stored at 30 °C
The influence of cavitation effects on the purification processes of beet sugar production juices
Get PDFThe existing technology for the purification of diffusion juice and its hardware design has not fundamentally changed over the past four decades. The lack of the necessary theoretical developments and experimental data hinders the development of existing and the development of new technological processes. Therefore, the main direction of improving the purification efficiency of juices of sugar beet production is the disclosure of its unused reserves and their implementation in practice. The scientific problem of choosing the rational direction for improving the technology of juice purification, which ensures the production of consumer granulated sugar in the face of changes in a wide range of quality of raw materials, is relevant and has important economic importance, especially in the context of the transition of beet sugar factories to a market economy. One way to solve it is to make fuller use of the adsorption capacity of calcium carbonate particles while increasing the filtration properties of saturation sediments. Therefore, the study investigates the effect of cavitation effects – vapor condensation and hydrodynamic processing of diffusion juice on the processes of purification of diffusion juice, juices of preliminary defecation, first and second saturations. The analysis of the influence of various effects of cavitation processing of juices from the point of view of improving the purification efficiency, the optimal place of the purification process in the technological scheme of production is established
Effect of process parameters on the functional and physicochemical properties of extrudates enriched with starch-based nut flour
Get PDFWidening the range of products produced on the basis of agricultural raw materials and improving the quality of these products and increasing their nutritional value ”‹”‹represent urgent challenges. Therefore, the production of new mass consumption products with high nutritional and biological value brings to the fore the use of local nut flour as an enriching supplement in innovative technological processes. The high nutritional value of nuts (nuts, walnuts, and peanuts) is due to their chemical composition, including lipids, a large amount of soluble proteins that are well absorbed by the human body, sufficiently large quantities of vitamin B1 and a small amount of vitamins PP and E. It is known that in peanut grains, lipids have a balanced composition of fats and acids, as well as sufficiently large amounts of essential amino acids, which makes their protein composition closer to that of animal proteins. This study considers the influence of thermoplastic extrusion parameters on the functional and physicochemical properties of extrudates in their formation process. The technological and design parameters of the process and their variation ranges are based on studies conducted on model systems. The ratio of the extrusion mixture components (formulation) is also developed. Based on the methodology for multifactorial experimental design, the variation of the volume weights, expansion rates, and mechanical specific energy expenditure of porous extrudates enriched with starch-based nut flour is studied. It has been established that the best quality indicators of the products are achieved with the minimum volume weight and the maximum expansion rate
Modelling of the process of vybromechanical activation of plant raw material hydrolysis for pectin extraction
Get PDFCentrifugal and vibrational technological effects are among the main approaches to intensify the process of plant raw materials hydrolysis for pectin extraction. With the impulse intensification of such a process, it is possible not only to increase its efficiency, but also to achieve the compactness of the equipment, reduce the cost of electricity and improve the quality of the product of hydrolysis. The hypothesis is confirmed, according to which the vibro-centrifugal intensification of hydrolysis increases the driving force of the process by not only activating the material flows of raw materials and reagents, but also by reducing the resistance in the technological environment.
Graphical and analytical dependencies of the power and energy parameters of the oscillatory system were obtained, which proved the overcoming of the flow resistance of the liquid medium in the entire speed range of the drive shaft with the potential to intensify the process at a power consumption of 2.0 – 3.0 kW and or by the force of 2.3 – 2.5 kN using the Lagrange and Cauchy methods for composing and solving the equations of motion of the moving components of the tested hydrolyser with vibrating activators, and the methods of mathematical analysis and their processing in the MathCAD. The analysis of the presented parameters of the studied process of mixing the pectin-containing mass in the hydrolyser allowed us to determine the rational mode parameters of processing, which correspond to the angular velocity of the drive shaft rad/s at the power consumption of 500 – 600 watts
Biochemical composition of the hops and quality of the finished beer
Get PDFThe large varieties of hops and hop products used in the brewing industry. Various in the biochemical composition, individual approaches to the brewing technology of each hop product are required in order to obtain a high-quality beer with a characteristic bitter taste and aroma. The purpose of this work was to study the biochemical composition of pressed conical hops, pellets of hop type 90, type 45, ethanolic and CO2 extracts of hop of various varieties, and their influence on the quality of the finished beer. As a result of comprehensive research on hops and hop products of various varieties, using the modern biochemical methods were determined differences in their biochemical composition depend on the absolute values such parameters as the mass fraction of α-acids, b-acids and their composition, xanthohumol, general polyphenols, essential oils, the ratio of their valuable components of hops: b-acids to a-acids and also for quantity of general polyphenols, essential oils per unit of α-acids. Based on the results of the biochemical composition of hops and hop products were investigated their influence on the quality of beer and were determined their using in brewing