Hungarian Technical Scientific Society of Transylvania EMT OJS
Not a member yet
    455 research outputs found

    A kannabidiol-γ-ciklodextrin komplex vizsgálata: Characterization of cannabidiol- γ-cyclodextrin complex

    Get PDF
    Cannabidiol (CBD) is a non-psychoactive cannabinoid molecule found in Cannabis sativa, that can also cause programmed cell death in various cancer cells, including human breast carcinoma, human prostate cancer, lymphocytic and monocytic leukemia etc.. The bioavailability of CBD is limited due to its heat and light sensitivity and poor water solubility. To improve its effect, it is necessary to complex; complexation with cyclodextrins is a common method to increase the solubility of small hydrophobic molecules. In the research, CBD was complexed with γ-cyclodextrin (γ-CD) by coprecipitation and kneading. The aim of this research is to produce and characterize cannabidiol-γ-cyclodextrin complexes with different molar ratios. The resulting complexes were characterized by infrared spectroscopy, thermogravimetry, and X-ray diffraction. Subsequent studies will include the effect of the complexing method and the host molecule on the solubility and stability of CBD. Kivonat  A kannabidiol (CBD) a kenderben (Cannabis sativa) található nem pszichoaktív tulajdonságú kannabinoid molekula, mely különféle rákos sejtekben programozott sejthalált is kiválthat, ideértve az emberi emlőkarcinómát, emberi prosztatarákot, limfocitikus és monocitikus leukémiákat stb.. A CBD biológiai hasznosulása korlátozott mível egy hő- és fényérzékeny illetve gyenge vízoldhatóságú vegyület. Ahhoz, hogy kifejtse hatását komplexálni szükséges; a ciklodextrinekkel való komplexálás egy bevett módszer a kis hidrofób molekulák oldhatóságának növelésére. A kutatás során a CBD komplexálása γ-ciklodextrinnel (γ-CD) koprecipitációs és együtt mozsarálás (kneading) módszerével történt. A dolgozat célja, előállítani és jellemezni a különböző mól arányú kannabidiol- γ-ciklodextrin komplexeket. Az így keletkezett komplexek infravörös spektroszkópiával, termogravimetriával és röntgen diffrakcióval lettek jellemzve. A későbbi vizsgálatok magukba foglalják majd a komplexképző módszernek illetve a gazda molekulának a hatását CBD oldhatóságára és stabilitására

    Biomimetikus katalizátorok fejlesztése mikrofluidikai reaktorokhoz: Development of Biomimetic catalysts for microfluidic reactors

    Get PDF
    During discovery of drug molecules, metabolism studies are important topic, which are usually carried out in vivo or in vitro using cell based systems. Instead of using living organism-based methods biomimetic systems can offer a promising alternative. Synthetic metalloporphyrins as biomimetic catalysts have strong structural similarity to the active site of the CYP enzymes responsible for the oxidative metabolism of drugs. The applicability and robustness of the porphyrin catalysts can be improved by immobilization techniques involving rationally functionalized solid carriers. The use of magnetic nanoparticles (MNPs) as catalyst carrier provides unique benefits, while the trapping, isolation or separation of the particles from the reaction mixture can be achieved with magnetic field. During my research, MNPs were prepared, modified with reactive function groups for immobilization of porphyrin catalyst, and inert groups which can influence the function group density. The fine-tuned immobilized catalyst was chosen and applied for continuous-flow microfluidical experiment. By the application of the developed biomimetic catalyst and reactor system, drug metabolites can be produced in very rapid way for further stages of drug discovery.   Kivonat A gyógyszervegyületek kifejlesztése során az egyik kritikus fontosságú terület a metabolizmus kutatás, mely során jellemzően in vivo és in vitro májsejt alapú rendszereket használnak, melyek számos hátránnyal rendelkeznek. Az ún. biomimetikus eljárások ígéretes alternatívát jelenthetnek, melyek a kiemelkedő katalitikus hatással bíró szintetikus metalloporfirinekkel megvalósíthatók. A porfirinek alkalmazása a szerkezeti hasonlóságukon alapszik a metabolizmusban részvevő CYP enzimek aktív helyén található hem csoporttal. Az érzékeny porfirin katalizátor alkalmazhatóságát, stabilitását nagyban javíthatjuk, ha valamilyen szilárd hordozó felületére rögzítjük. Mágneses nanorészecskék alkalmazása előnyös katalizátor hordozóként, mivel helyhez rögzítésük vagy elválasztásuk a reakcióelegytől mágneses erőtérrel megvalósítható. Munkám során mágneses nanorészecskék szintézisét és felületmódosítását valósítottam meg. A részecskék felületén a porfirin rögzítésére szolgáló reaktív funkcióscsoportokat, valamint a funkcióscsoport sűrűségét befolyásoló inert csoportokat alakítottam ki. Az ily módon finomhangolt katalizátort sikeresen alkalmaztam folyamatos áramú mikrofluidikai reaktorokban gyógyszermetabolitok szintézisére

    Nagyhatékonyságú folyadékkromatográfiás módszer optimizálása Microsoft Excel felhasználásával: Optimizing a high performance liquid chromatography separation with Microsoft Excel

    Get PDF
    The aim of this study  was to write a program in  Microsoft Excel which  is capable to simulate a isocratic separation performed  with   an  high performance liquid chromatography (HPLC). Optimization of a HPLC separation was hindered under laboratory conditions, however, with an HPLC simulator  experiments can be designed to predict the practical conditions of optimization procedure. In our research, a complete separation of a four-component mixture was performed by determining the relationship between solvent composition and retention factors. The use of Excel spreadsheets facilitates the transparency of the analysis of the data needed to develop the method.  Kivonat A kutatásunk célja egy olyan Microsoft Excel program megírása volt, amely képes az eluenserősség hatását szimulálni egy izokratikus folyadékkromatografiás eljárás során. Fontos volt számunkra, hogy egy olyan optimális eluens összetételt állapítsunk meg a szoftver segítségével, ahol mind a felbontás, mind a teljes futási idő megfelelő, ezáltal lecsökkenteni a kísérletek számát. A modellezés alapja egy empirikus képlet amely kapcsolatot teremt  az alkalmazott  eluens szerves oldószer aránya és az adott komponens retenciós faktora között  , amely kapcsolatot teremt a retenciós faktor logaritmusa és az eluens összetétele között.A retenciós faktorból és a holtidőből retenciós időt tudunk számolni, amelyet fel tudunk használni a Gaussian típusú detektor jel megalkotásához, és abban az esetben, ha változtatjuk az eluenserősséget a kromatogram változni fog, így meg tudjuk állapítani azt az összetételt  , ahol a felbontás számunkra megfelel

    Királis (tio)négyzetamid organokatalizátorok előállítása és alkalmazása: Synthesis and application of chiral (thio)squaramide organocatalysts

    Get PDF
    During my research work cinchona-, and proline-based chiral squaramide, and thiosquaramide organocatalysts were synthesized. The promising new organocatalyst class, the thiosquaramides, were gained by the thionation of the appropriate squaramide with pyridine complex of phosphorus pentasulfide. In 2017, Rawal and his co-workers were the first ones who successfully managed to apply the double hydrogen-bond donor thiosquaramides in asymmetric reactions. They recognized the great potential of this new type of catalyst. If the carbonyl groups of squaramide are converted to thiocarbonyl groups, the acidity of the hydrogen-bond unit increases which can result in stronger hydrogen bond between the substrate(s) and the catalyst. Moreover, thiosquaramides are found to be more soluble in nonpolar organic solvent than their squaramide counterparts. The synthesized organocatalysts were applied in asymmetric C–C coupling reactions, furthermore, the proline-based (thio)squaramide were proved to be excellent organocatalysts for the enamine catalysed Diels–Alder reaction. Kivonat Kutatómunkám során cinkona alkaloid, valamint prolin alapú királis négyzetamid, illetve tionégyzetamid organokatalizátorokat állítottam elő. A tionégyzetamidokat a megfelelő négyzetamidokból foszfor-pentaszulfid piridin komplexével történő tionálás segítségével alakítottam ki. 2017-ben Rawal és munkatársai elsőként alkalmazták sztereoszelektív szintézisekben a kétszeres hidrogénkötés donor típusú tionégyzetamid organokatalizátorokat. Azt találták, hogyha a karbonilcsoportokat tiokarbonil csoportokra cserélik, akkor a katalizátor savas karaktere növekszik és ezáltal jobb hidrogénkötés donorként viselkedhet. Ezenfelül a tionégyzetamidok további előnye a négyzetamidokkal szemben, hogy nagyobb lipofilitásuk révén gyakran jobb oldhatósággal rendelkeznek a szerves oldószerekben. Az előállított organokatalizátorokat C–C kapcsolási konjugált addícióban vizsgáltam, továbbá, a prolin alapú organokatalizátorokat sikeresen alkalmaztam enamin katalizált Diels–Alder-reakcióban is

    Etilén oxid-propilén oxid kopolimerek hidrodinamikai sugarának tanulmányozása az összetétel függvényében: Investigation of hydrodynamic radius of ethylene-oxide propylene-oxide copolymers as a function of their chemical compositions

    Get PDF
    The hydrodynamic radius (rhyd) of a copolymer highly depends on its chemical composition and molecular weight, therefore, the molecular weight measurement using GPC (gel permeation chromatography) is rather challenging. The rhyd dependence on the chemical composition could be determined using reference copolymers, however, such standards are not commercially available. Our primary aim was to establish a correlation between the rhyd (GPC elution time) and the chemical composition of b-ethylene-oxide b-propylene oxide copolymers. The separation of copolymers based on their hydrodynamic volumes has been performed for the b-EO-b-PO copolymers. The chemical compositions of the fractions were analyzed by MALDI TOF MS. The result can be used to obtain higher accuracy for copolymer molecular weight determination by GPC  Kivonat A kopolimerek hidrodinamikai sugarát (rhid) azok molekulatömegétől és összetételétől is függ, ezáltal a molekulatömeg meghatározása GPC (gélpermeációs kromatográfia) komoly kihívást jelent. A rhid és az összetétel közötti korreláció referencia anyag segítségével meghatározható lenne, de ilyen standardok kereskedelmi forgalomban nem kaphatók. Célunk volt, hogy meghatározzuk a b-etilén oxid – b-propilén oxid kopolimerek rhid-a és összetételük között összefüggést. GPC kolonna segítségével a kopolimereket azok mérete (rhid) alapján választottuk el. A gyűjtött frakciókat MALDI-TOF MS módszerrel elemeztük. Az eredmények felhasználásával a molekulatömeg meghatározása ezeknek a polimereknek pontosabb lehet GPC módszerrel.   Köszönetnyilvánítás Köszönjük a következő pályázatoknak a munka során nyújtott anyagi segítséget: NKFI FK-132385, valamint a GINOP-2.3.2-15-2016-00041 és a GINOP 2.3.3-15-2016-00021 pályázatoknak, amelyek az Európai Unió támogatásával és az Európai Regionális Fejlesztési Alap társfinanszírozásával valósultak meg. Továbbá munkánkat az MTA Bolyai János Kutatói Ösztöndíj is támogatta (Nagy Tibor), az Innovációs és Technológiai Minisztérium ÚNKP-20-5 kódszámú Új Nemzeti Kiválóság Programjának a Nemzeti Kutatási, Fejlesztési és Innovációs Alapból finanszírozott szakmai támogatásával készült (Nagy Tibor)

    Lipid A foszforilációs- és acilációs izomereinek elválasztása és jellemzése NACE-ESI-MS/MS módszerrel: Separation and characterization of the phosphorylation and acylation isomers of lipid A by NACE-ESI-MS/MS

    Get PDF
    Lipid A is the anchor of endotoxins on the surface of Gram-negative bacteria. In the human body, it is a prominent stimulator of the immune system, but it may also cause dangerous medical conditions, such as endotoxic shock and sepsis. To reveal the specific structural parts and molecular heterogeneity of lipid A isolates, such as the site of phosphorylation and type of fatty acyl chains, a pressure-assisted non-aqueous capillary electrophoresis – tandem mass spectrometry method was developed. Baseline separation of both phosphorylation and acylation isomers was achieved. Identification was carried out from the tandem mass spectra recorded in the positive ionization mode. B-type ions are formed by diagnostic neutral losses. B2 type ions are confirming the site of phosphorylation, while B1 type ions and other fragments are enabling the characterization of acylation isomers. This novel method should be regarded as an orthogonal technique to formerly developed LC‐MS/MS methods in the screening of bacterial samples or lipid A based therapeutics. Kivonat Az endotoxinok a lipid A részükkel ágyazódnak be a Gram-negatív baktériumok sejtmembránjába. Az emberi szervezetben a lipid A hatékonyan stimulálja az immunrendszert, de akár súlyos egészségi állapotokat is előidézhet, mint az endotoxikus sokk, vagy a szepszis. A szerkezetének részleteinek megismerésére és a lipid A izolátum alkotóinak változatosságát – úgymint a foszforilációs helyek és a kapcsolódó zsírsavláncok típusát – feltárandó kifejlesztettünk egy nyomással segített nemvizes kapilláris elektroforézis–tandem tömegspektrometriás módszert. A foszforilációs- és az acilációs izomereknél is sikeres alapvonali elválasztást értünk el. A szerkezeti információt a pozitív ion módban felvett tandem tömegspektrumok szolgáltatták. Diagnosztikus semleges vesztésekkel B-típusú ionok keletkeznek. A B2-típusú ionok azonosítják a foszforilációs pozíciót, míg a B1 ionok az acilációs izomerek jellemzését teszik lehetővé. Jelen módszer a korábban kifejlesztett LC-MS/MS módszerek kiegészítője lehet a bakteriális eredetű minták vizsgálatában és a lipid A klinikai alkalmazásakor

    PTA (1,3,5-triaza-7-foszfaadamantán) tartalmú foszfóniumsók mechanokémiai előállítása és azok ezüst(I)-ionokkal képzett koordinációs polimerei: Mechanochemical derivatization of 1,3,5-triaza-7-phosphaadamantane (PTA) and silver-based coordination polymers of the resulting phosphabetaines

    Get PDF
    ABSTRACT New phosphabetaines were prepared by reacting 1,3,5-triaza-7-phosphaadamantane (PTA) with unsaturated dicarboxylic acids (maleic, glutaconic, itaconic acid) in water. Same adducts were also obtained by solid state reactions using a planetary ball mill. The reaction of these new phosphabetaines with Ag(CF3SO3) yielded Ag(I)-based coordination polymers in aqueous solutions. According to the SC-XRD results, in these polymers the Ag(I)-ion coordinates to the N and O donor atoms of the ligands, however, Ag(I)…Ag(I) interactions were also identified. The hydrodynamic radii of the glutaconyl derivative of PTA and its silver(I)-based coordination polymer were also determined by diffusion NMR in aqueous solutions.   Keywords: 1,3,5-triaza-7-phosphaadamantane, ball mill, coordination polymer   Kivonat Az 1,3,5-triaza-7-foszfaadamatán (PTA) és a telítetlen dikarbonsavak (maleinsav, glutakonsav, itakonsav) vizes oldataiban új foszfabetainokat állítottunk elő. Ugyanezekhez az adduktumokhoz jutottunk akkor is, ha a reaktánsokat bolygóműves golyósmalomban őröltük. A termékek vizes oldataihoz Ag(CF3SO3)-t adva olyan koordinációs polimereket különítettünk el, melyekben az Ag(I)-ion nemcsak a ligandum N- és O-donoratomjaihoz koordinálódik, de  Ag(I)…Ag(I) kölcsönhatásokat is azonosítottunk. A glutakonsav és a PTA adduktumának, valamint az azzal képzett Ag-polimernek vizes oldataiban diffúziós NMR vizsgálatokat végeztünk és meghatároztuk a részecskék hidrodinamikai átmérőjét.   Kulcsszavak:1,3,5-triaza-7-foszfaadamatán, golyósmalom, koordinációs polime

    Részecskeszámlálás a közúti és a nem közúti járművek időszakos műszaki vizsgálata során – Helyzetelemzés: Particle counting during the periodical technical inspection of road and non-road vehicles – Situationanalyses

    Get PDF
    Particulate matter coming from diesel-powered vehicles are increasingly polluting the environment. Type-approval requirements for vehicles and their engines are becoming more stringent in terms of emissions, but this can really have a beneficial effect if vehicles are subjected to at least such stringent requirements during their use. In our article, we present the first foreign experiences with particle counting from countries where it has already been applied to road and non-road vehicles. Kivonat A dízelmotorral hajtott járművekből származó részecske egyre nagyobb mértékben szennyezi a környezetet. A járművekre és motorjaikra vonatkozó típusvizsgálati előírások egyre szigorodnak a károsanyag-kibocsátás tekintetében, de ennek hasznos hatása akkor lehet igazán, ha járműveket a használatuk során is legalább ilyen szigorú követelményeknek teszik ki. Cikkünkben bemutatjuk az első külföldi tapasztalatokat a részecske, számlálásos vizsgálatával kapcsolatban, olyan országokból, ahol ezt már alkalmazni kezdték a közúti és nem közúti járművek esetén.   &nbsp

    A középkori sóbányászat egy, a bányászattörténet számára eddig ismeretlen helye, oklevelek és helynévanyag tükrében: A site of medieval salt mining, so far unknown to mining history, according to period diplomas and toponymics / Un loc de exploatare medievală a sării, necunoscut pentru istoria mineritului, în lumina documentelor vremii şi a toponimiei

    Get PDF
    The study presents the case of the toponym ‛ocna’ (in Hungarian: akna; in English: salt mine) occurring between the administrative boundaries of Gheorgheni and Pata near Cluj-Napoca. This name was mentioned for the first time in a document from 1366, and it is still known by the locals. The toponym denominates a well-known geological outcrop, which is also represented on the geological map of Romania on a scale of 1:200,000, but is not mentioned in any writing concerning the history of salt mining. This study demonstrates that the toponym mentioned in 1366 is identical to the denomination used nowadays. At the same time it discusses the probable circumstances of the abandonment of the salt mine from Gheorgheni in the Middle Ages, as well as its fading into oblivion within mining industry.) Rezumat Lucrarea prezintă cazul toponimii ‛ocna’ (ungureşte: akna) dintre hotarele localităţilor Gheorgheni şi Pata din apropierea Clujului, care este pomenit pentru prima oară într-un document din 1366 și este cunoscut de localnici până astăzi. Toponimul desemnează o ivire la suprafaţă bine cunoscută de geologie, reprezentată şi pe harta geologică a României 1:200 000, dar care nu a fost pomenită în nici-o lucrare de istorie a mineritului sării. Se demonstrează identitatea toponimii pomenit în documentul din 1366 cu cel actual în folosinţă şi se discută circumstanţele verosimile a părăsirii ocnei de sare în evul mediu, respectiv a ieşirii ei din atenţia mineritului. &nbsp

    Rehabilitációs robotkéz-modul fejlesztése: Rehabilitation robot hand modul developement

    Get PDF
    During the rehabilitation of stroke upper limb function loss by robotic physiotherapy, the hand is adapted to support active guided motion therapy with a unique developed and manufactured hand module. This paper presents the major parts of the hand rehabilitation module design, from mechanical design to electrical planning. The main purpose of the rehabilitation hand module is do a programmable robotics physiotherapy of the hand of the spasm patients. Spasm is basically a sudden, involuntary, painful contraction of the muscle, virtually a muscle or group of muscles, due by nerve damage caused by a stroke. The device consists of two components, a three-degree module and a two-degree modul whitch is a serial kinematic, purely rotationally articulated module. The three-degree robot finger moves the index, middle and ring fingers through a load distributor, which is located above the fingers. The orthoses of the fingers are connected to the load distribution with magnets. The two degrees of freedom module moves the thumb along a plane (tilted at two angles) to close it. The rehabilitation device facilitate the side change on the left and the right hands, so it can rehabilitate both sides of the hand. Kivonat A stroke miatt bekövetkezett felső végtagi funkcióvesztés robotos gyógytornáztatással történő rehabilitációja során a kézfejet egy egyedi fejlesztésű és gyártású kézmodullal alkalmassá tesszük aktív vezetett mozgásterápia támogatására. A konferencián a kézmodul tervezésének főbb lépései kerülnek bemutatásra, a gépészeten át egészen a villamos tervekig. A rehabilitációs eszköz célja a féloldalt bénult spazmusban szenvedő betegek kézfejének gyógytornásztatása programozható módon. A spazmus lényegében egy izomgörcs, gyakorlatilag az izom vagy izomcsoport hirtelen beálló, önkéntelen, fájdalmas összehúzódása, melynek oka az agyvérzés következtében kialakult idegsérülés. Az eszköz két részegységből áll: egy három szabadságfokú és egy két szabadságfokú síkbeli, soros kinematikájú, tisztán rotációs csuklókból felépített modulból. A három szabadságfokú robotujj a mutató, középső és gyűrűs ujjat mozgatja egy, az ujjak felett elhelyezett teherelosztó segítségével. A teherelosztóhoz mágnesek segítségével csatlakoznak az ujj ortézisek. A két szabadságfokú robotujj a hüvelykujjat mozgatja, a zárásnak megfelelő (két szögben megdöntött) sík mentén. A rehabilitációs eszköz lehetővé teszi a bal-és jobb kéz cseréjét, így minkét oldal rehabilitálására lehetőség van

    418

    full texts

    455

    metadata records
    Updated in last 30 days.
    Hungarian Technical Scientific Society of Transylvania EMT OJS
    Access Repository Dashboard
    Do you manage Open Research Online? Become a CORE Member to access insider analytics, issue reports and manage access to outputs from your repository in the CORE Repository Dashboard! 👇