Jurnal Sains Teknologi dan Lingkungan (JSTL)
Not a member yet
    335 research outputs found

    Pemanfaatan Limbah Plastik Dan Serbuk Gergaji Kayu Sebagai Bahan Pengisi Bambu Komposit Setempat

    Get PDF
    This study aims to determine the mechanical properties (compressive strength and shear strength) of bamboo filled with PET plastic and wood sawdust. Five variations of test objects were made, namely BK-0 (bamboo without filler as a control), BK-1 (bamboo filled with PET plastic), BK-2 (bamboo filled with PET plastic + adhesive coated), BK-3 (bamboo filled with PET plastic + powder wood saw), BK-4 (bamboo filled with PET plastic + wood sawdust and coated with adhesive). The test results give the value of the compressive strength of bamboo from BK-0 to BK-4 in a row of 22.7 MPa, 29.4 MPa, 32.7 MPa, 33.2 MPa, 35.7 MPa or an increase in the compressive strength of BK-0 in a row by 30%, 44%, 46%, and 57%. Meanwhile, the shear strength of bamboo from BK-0 to BK-4 is 4.55 MPa, 5.00 MPa, 5.05 MPa, 5.40 MPa, 5.50 MPa or an increase in shear strength to BK-0 is 10%, 11%, respectively. , 19%, and 21%

    Pengujian Sifat Fisika dan Listrik Minyak Kelapa Sebagai Alternatif Isolasi Pada Trafo Daya

    Get PDF
    Transformer oil insulation material is the result of processes from petroleum, the material that is not able to be renewed, increasingly scarce, expensive, an imported commodity, and the need is increasing. So it is necessary to strive for alternative transformer oil that comes from renewable materials, based on domestic production, increases the added value of a commodity and environmentally friendly. The alternative transformer oil in this case is coconut oil. For this reason, it is necessary to test the feasibility of coconut oil as an alternative to transformer oil which includes testing of physical, chemical and electrical properties. The test results are compared with the standard transformer oil according to the IEC. The test results, the flashpoint and dielectric strength are feasible as an alternative to transformer oil, the density, volume expansion coefficient and viscosity of coconut oil are not suitable for use as an alternative to power transformer insulation oil. The percentage in terms of physical properties is 25%, with 4 tests of 10 existing physical properties. The feasibility of electrical properties is 50% with 1 test of 2 existing electrical properties

    Kajian Biofisik Lahan Untuk Tanaman Porang Sebagai Anasir Konservasi Pada Sistem Agroforestri Di Pulau Lombok

    Get PDF
    Agricultural land in North Lombok is dominated by a typology of sub-optimal land, physically, chemically and biologically. These properties make it vulnerable to degradation. In such land, agroforestry system is highly recommended, where the porang plant can be included as a component. Nowdays, porang is gaining popularity as a commodity with economic value, and is suitable as an intercropping plant. It is easy to grow on almost all types of soil, and is resistant to shade, making it adaptive to agroforestry systems as non-timber under standing plants in community forest systems. It is believed that this will provide multiple benefits economicly and environmentaly, if it accompanied by the principles of soil and water conservation. The role of porang as a conservative agent has been investigated through a scientific approach as the basis for the domistication of porang in agroforestry systems. The results showed that agroforestry with porang could help improve the stability of the soil aggregates as indicated by the soil aggregate stability index 59 which means rather stable. Soil moisture of wilting point in agroforestry system with porang increased from 3.0% (without porang) to 5.4%. In addition, the soil organic matter content increased to 3.94% (quite high) on the system with porang because the stems and leaves of porang plant are quickly weathered. The ground cover is relatively tight, so it can prevent soil erosion. Porang also play a role in increasing water infiltration due to the presence of porang’s roots and tubers. Thus the domistication of porang fulfills the requirements as an agent of soil conservation, as non-timber plant in the agroforestry system, if it is cultivated according to the principles of soil and water conservation on the typology of sub-optimal land in North Lombok.Â

    Analisis Big Data Geomagnetik Dengan Metode Diferensiasi Sebagai Prekursor Gempa Lombok Tahun 2018

    Get PDF
    Lombok is an area with the highest geomagnetic anomaly in Indonesia (Zubaidah et al., 2014). From the end of July to the end of August 2018, Lombok experienced a series of fairly large earthquakes. Identification of geomagnetic signals, especially in the Ultra Low Frequency (ULF) spectrum, can be used as earthquake precursors (Saroso, 2010). Intermagnet IAGA (International Aeronomy Geomagnetic Association) is a network of international geomagnetic observatory stations that have large world geomagnetic data. Big data analysis is very important because very large information is needed in disaster mitigation. This study uses geomagnetic data per second for 24 hours from 28 August to 30 November 2018 taken from Kakadu (KDU) Australia and Nurul Bayan Station (NRB) Lombok. The analytical method used is Differentiation by calculating the F value (total magnetic field) for KDU and NRB, then look for the difference and analyze the pattern. The results found that there was an anomaly phenomenon of the Earth's magnetic field in Nurul Bayan Lombok which was detected for 17 days during October 2018. Â

    Pengolahan Tanah Tercemar Logam Berat Pb dan Cd Menggunakan Biochar Sekam Padi dengan Variasi Ukuran Partikel

    Get PDF
    Soil contamination by heavy metals lead (Pb) and cadmium (Cd) is a form of pollution that is very dangerous for living things. One of the efforts to cultivate polluted soil is the remediation method using biochar from rice husks. The purpose of this study was to analyze the effect of biochar particle size variations on the removal of heavy metals Pb and Cd on contaminated soil. Biochar is made by pyrolysis at 500 0C for 1 hour and flows 0.1 L / minute of N2 gas. This study used a variety of biochar particle sizes of 100 mesh, 60 mesh, 40 mesh and testing time every 10 days for 1 month. The results of this study were the highest Pb and Cd removal in the addition of biochar with a particle size of 100 mesh, namely with a Pb concentration of 91.32 mg / kg and a removal efficiency of 54.05% ; Cd concentration of 10.47 mg / kg and a removal efficiency of 47.36%. Based on the results obtained, it can be stated that the smaller the biochar particle size, the efficiency of heavy metal removal will increase

    Modifikasi Sifat Mineralogi dan Fisiko-Kimia Bahan Tanah Vertik dengan Ball Mill Berenergi Tinggi

    Get PDF
    test of modifying the properties of vertic material by using a ball milling technique was carried out with the primary aim to eliminate the vertic (swelling-shrinking) property and increase the electrical charge of the material. The clay fraction of Vertisol was dried and ball milled for 5, 10, and 20 minutes. Results reveal that the clay fraction of the soil material was dominated by montmorillonite mineral, and ball milling for > 5 minutes transformed the crystalline montmorillonite into amorphous (non-crystalline) particles. Those changes were followed by increasing the vertic features, cation exchange capacity, water holding capacity, and suspension effect of the milled material. The improvement of vertic characteristics might be due to the increase of electric charge of the milled particles. Thus, high-energy ball milling was an effective technique to improve the reactivity and vertic property of vertic material of Vertisols. Further studies are needed to evaluate the potential uses of modified vertic materials as ceramic material, cement component, adsorbent of heavy metals, and other contaminants, or catalysato

    Daya Gabung Beberapa Varietas Padi (Oryza sativa L.) pada Persilangan Dialel Menggunakan Metode Griffing II

    Get PDF
    Diallel crossing is a method that is widely used to determine the ability to combine each individual so that it can identify the potential elders to be used in crossbreeding programs to assemble high yielding varieties. This experiment aims to determine the combining power of dialelic crosses of several varieties of rice using the Griffing II method, carried out in the experimental field of the Faculty of Agriculture, Mataram University in Nyiur Lembang Village, Narmada District, West Lombok Regency, from February to July 2019. This experiment uses the method experiments carried out in the field. The materials used in this experiment were four parents, namely IPB 3S variety, Situ Patenggang variety, Inpari 32 and G11 strain and the phenotype of the cross between the four parents. The experimental results showed that the effects of general affinity and special affinity for all observed characters (plant height, number of productive tillers, number of non-productive tillers, panicle length, number of filled grain, number of empty grain and weight of 100 grains) were significantly different, except on the effect of general affinity for the number of non-productive tillers showed no significant difference. The results of the combined power analysis of the four elders were positive, so it can be said that the four elders would get good results when crossed with a number of other genotypes

    Perbaikan Sudut Daun Populasi Komposit Tanaman Jagung Melalui Hibridisasi Dengan Varietas Hibrida

    Get PDF
    This study aims to determine the average leaf angle, harvest age and yield of F1 from cross-hybrid composite; heterosis value and knowing the maternal effect of these three traits on maize. The experiment was carried out in technically irrigated rice fields from November 2019 to February 2020. The design used in this experiment was a randomized block design with two replications. The treatment was 28 F1 as a result of crossing P8IS vs NK212 and P8IS vs NK7328 and their respective reciprocal crosses. The experimental data were analyzed by means of analysis of variance and further tested with the LSD test at the 5 percent level. Heterosis values were calculated on the basis of the parents whose scores were higher (High Parent Heterosis). The t test at the 5% level was used to determine whether the maternal effect was significant. The results showed that the mean leaf angles of F1 lines from crosses and reciprocal P8IS vs NK212 were the same as the two parents; whereas the P8IS vs NK7328 cross is different. The reciprocal of cross number 13 (P8IS vs Nk7328 /R13) has smaller leaf angle than P8IS and is the same as the leaf angle of NK7328. The yield of the F1 lines from the two types of crosses was the same as each of the two parents; however, there was a tendency for an increase in yield compared to P8IS for most of the F1 lines. There was a change in leaf angle properties, harvest age and yield of F1 lines compared to one of the best parents with heterosis values are negative and positive with variations from 0.00 to 65.70 percent. Coefficient of correlation between heterosis with the average value of traits was classified as strong for the harvest age; moderate for yield and weak for leaf angle. These three traits in the two types of crosses showed no maternal effects. Smaller leaf angle, super early harvest age and higher yield, are possible to be obtained from the lines of both crosses

    Penentuan Konstanta Laju Pengeringan Coconut Chips

    Get PDF
    This study aims to determine the drying rate constant of coconut chips using an oven. Coconut chips drying is carried out at drying temperatures of 50 ° C, 60 ° C and 70 ° C. Drying coconut chips has been conducted at an initial water content of 40-50% wb until it reached ± 10% wb. The change of moisture content was measured every 15 minutes, and the measurement of the water content was determined by the thermogravimetric method. Newton's model was used in determining the observation drying rate constant. Furthermore, the observation drying rate constant was applied to predict the drying rate constant as a function of temperature using the Arrhenius equation. The results showed that the predicted drying rate constants ranged from 0.0090 - 0.0130 minute-1.Â

    Karakter Habitus dan Viabilitas Biji Tanaman Biduri (Calotropis gigantea) Aksesi Lombok Tengah Bagian Selatan

    Get PDF
    This study aims to describe the morphological character and seed growth potential of biduri (Calotropis gigantea) accession growing in the tourist area of South Central Lombok (Kuta Mandalika, Tanjung Aan, and Seger), and was carried out during February-August 2020. The method used was descriptive observative with survey techniques and sampling by purposive sampling based on the population of biduri. The seed growth experiment used a completely randomized design in a greenhouse consisting of two factors, namely the type of substrate and accession, which was repeated three times, so that there were 18 experimental units. The results shows that the Kuta Mandalika Biduri accession was showed superiority in the number of fruit characters per panicle. Tanjung Aan accessions excel in branching characters (primary and secondary branches), number of panicles per tree, number of flowers per panicle, number of fruits per tree and fruit size. Meanwhile, Seger accessions were superior in terms of plant height, seed size and weight of 100 seeds. There were no character differences in seed viability of the three accessions. The closest genetic-relationship occurs in the Kuta Mandalika accession of plot 2 sample 2 with the Kuta Mandalika accession of plot 3 sample 1 marked with a coefficient value of 1.00. Meanwhile, the furthest relationship was found in the Kuta Mandalika accession of plot 1 sample 1 with Tanjung Aan accession of plot 2 sample 2 marked with a coefficient value of 33.932.Â

    330

    full texts

    335

    metadata records
    Updated in last 30 days.
    Jurnal Sains Teknologi dan Lingkungan (JSTL)
    Access Repository Dashboard
    Do you manage Open Research Online? Become a CORE Member to access insider analytics, issue reports and manage access to outputs from your repository in the CORE Repository Dashboard! 👇