Qucosa – Hemholtz-Zentrum Dresden-Rossendorf
Not a member yet
801 research outputs found
Sort by
Kolloidgetragene Schwermetalle im Entwässerungsstollen einer stillgelegten Zn-Pb-Ag Grube
Get PDFColloid-borne Heavy Metals in the Drainage Gallery of an Abandoned Zn-Pb-Ag Mine (in German). The colloid inventories and the colloid-borne heavy metals in the Rothschönberger Stolln adit, the main drainage gallery of the Freiberg, Germany, mining district, were investigated. This adit runs from Freiberg to the village of Rothschönberg, where it flows into the river Triebisch, a tributary of the river Elbe. The water of the adit is a typical mine water from a flooded ore mine. The main reason for choosing the Rothschönberger Stolln adit for colloid investigations was that ample knowledge concerning the origin of the water and the geology of its catchment area exists. The aim was to characterize the colloids at the mouth of the adit and to elucidate if important contaminants occur in a colloid-borne form. A colloid concentration of about 1 mg/L was found. The particles have a size of 50 to 150 nm. They primarily consist of iron and aluminum oxyhydroxide and carry trace elements such as Pb, As, Cu, Y, La. The contaminants Pb and As are almost entirely colloid-borne. Colloids can have both a retarding and a stimulating influence on the transport of contaminants. The existence of colloids should be taken into account if mine waters flow to the biosphere or if mine waters are to be purified by permeable reactive barriers
Annual Report 2003 - Institute of Bioinorganic and Radiopharmaceutical chemistry
Get PDFThe report gives an overview on the activities of the Institute ofBioinorganic and Radiopharmaceutical Chemistry in 2003
Finite-Elemente-Modellierung des Risswachstums an 3-Punktbiegeproben
Get PDFDas Verhalten einer 3-Punkt-Biegeprobe mit Anriss unter Belastung kann mittels eines Finite-Element-Modells nachgebildet werden. Das Modell ermöglicht die Berücksichtigung von elastisch-plastischem Materialverhalten entsprechend der jeweiligen materialspezifischen Spannungs-Dehnungs-Kurve, welche mit dem Ansatz der multilinearen kinematischen Verfestigung (MKIN) umgesetzt wird. Weiterhin gestattet das Modell die Einbeziehung der realen Rollenkinematik beim Biegevorgang. Für die Beschreibung des Bruchkriteriums wird ein spezielles Damage-Modell verwendet, mit dem man in der Lage ist, das Risswachstums in geeigneter Weise wiederzugeben. Mit diesem Modell lässt sich auch das Teilentlastungs-Compliance-Verfahren nachbilden. Diese Simulation ermöglicht die Einschätzung von Korrekturansätzen zur experimentellen Risslängenbestimmung über die Compliance-Methode
Herstellung von Nanometer-Strukturen mittels feinfokussiertem Ionenstrahl (FIB)
Get PDFFeinfokussierte Ionenstrahlen dienen in den Gebieten der Halbleiterindustrie und Materialforschung der Mikro- und Nanostrukturierung. Die vorliegende Arbeit beschäftigt sich mit den beiden Hauptanwendungen von fokussierten Ionenstrahlen, dem Materialabtrag und der ionenstrahlinduzierten Materialabscheidung. Dabei wird die hochauflösende Ionensäule CANION 31Z der Firma Orsay Physics mit Stromdichten von bis zu 10 A/cm2 und mit integriertem Gassystem eingesetzt. Es wird ausführlich auf Anwendungsbeispiele von Fokussierten Ionenstrahlsystemen im Bereich der Industrie und Forschung eingegangen. Schwerpunktmäßig wird die Abscheidung von Wolfram aus dem Precursorgas W(CO)6 (Wolframhexacarbonyl) auf Si und SiO2 als Substrat untersucht, mit dem Ziel, gut leitfähige Drähte (hier im Sinne von Leiterbahnen) mit minimalem Querschnitt herzustellen. Die Optimierung der Ionenstrahl-Parameter dieser Feinfokussierten Ionenstrahlanlage bezüglich der Abscheidung steht im Vordergrund. Dabei wird ein kurzer Einblick in die Theorie der Schichtentstehung beim Abscheidevorgang gegeben. Untersuchungen der erzeugten Strukturen entsprechend der Schichtqualität und der Strukturabmessungen werden erläutert und die Ergebnisse diskutiert. Es konnten Wolframdrähte mit einer Länge von 20 ... 100 µm, einer Breite von minimal 150 nm und einer Höhe von maximal 600 nm angefertigt werden. Die Zusammensetzung der Drähte in Abhängigkeit der Prozessparameter wurde mittels AES bestimmt. Im optimalen Fall wurden die Schichtanteile zu 80% W, 5% O, 6% C und 9% Ga ermittelt (Angaben in Atomprozent). Der spezifische Widerstand der Wolframdrähte ist im Bereich 150 ... 320 µWcm gemessen worden
Investigation of the Complexation and the Migration Behavior of Actinides and Non-Radioactive Substances with Humic Acids under Geogenic Conditions - Complexation of Humic Acids with Actindies in the Oxidation State IV Th, U, Np
Get PDFObjective of this project was the study of basic interaction and migration processes of actinides in the environment in presence of humic acids (HA). To obtain more basic knowledge on these interaction processes synthetic HA with specific functional properties as well as 14C-labeled HA were synthesized and applied in comparison to the natural HA Aldrich. One focus of the work was on the synthesis of HA with distinct redox functionalities. The obtained synthetic products that are characterized by significantly higher Fe(III) redox capacities than Aldrich HA were applied to study the redox properties of HA and the redox stability of U(VI) humate complexes. It was confirmed that phenolic OH groups play an important role for the redox properties of HA. However, the results indicate that there are also other processes than the single oxidation of phenolic OH groups and/or other functional groups contributing to the redox behavior of HA. A first direct-spectroscopic proof for the reduction of U(VI) by synthetic HA with distinct redox functionality was obtained. The complexation behavior of synthetic and natural HA with actinides (Th, Np, Pu) was studied. Structural parameters of Pu(III), Th(IV), Np(IV) and Np(V) humates were determined by X-ray absorption spectroscopy (XAS). The results show that carboxylate groups dominate the interaction between HA and actinide ions. These are predominant monodentately bound. The influence of phenolic OH groups on the Np(V) complexation by HA was studied with modified HA (blocked phenolic OH groups). The blocking of phenolic OH groups induces a decrease of the number of maximal available complexing sites of HA, whereas complex stability constant and Np(V) near-neighbor surrounding are not affected. The effects of HA on the sorption and migration behavior of actinides was studied in batch and column experiments. Th(IV) sorption onto quartz and Np(V) sorption onto granite and its mineral constituents are affected by the pH value and the presence of HA. HA exhibits a significant influence on the transport of U(IV) and U(VI) in a laboratory quartz sand system. In order to provide the basis for a more reliable modeling of the actinide transport, the metal ion complexation with HA has to be integrated into existing geochemical speciation codes. Within this project the metal ion charge neutralization model was embedded into the geochemical modeling code EQ3/6. In addition to that, a digital data base was developed which covers HA complexation data basing on the charge neutralization model
Echtzeit-in-situ-Messung der Oberflächenbelegung einer Magnetron-Kathode bei der reaktiven Sputter-Abscheidung
Get PDFReactive Sputtering is a widely used technique in processing of thin compound films. Such films can be sputtered from metal targets, which are comparatively cost efficient. Also the fact that sputtering from metal targets can ccur in the dc mode reduces the cost of the sputtering equipment. To keep the deposition process stable, its necessary to know the effects of target poisoning including its hyteresis behavior. The aim of this work was to nvestigate the evolution of reactive gas coverage on a titanium magnetron target surface, by real time, in-situ ion beam analysis during magnetron sputtering. A cylindrical 2 inch magnetron was used for reactive sputtering of TiN. It was operated in an Ar/N2 gas mixture at achamber pressure of about 3∙10-3 mbar. The argon/nitrogen flux ratio was variated between 0 and 20%. The nitrogen concentration on the target was determinated using the 14N(d, α)12C, nuclear reaction at a deuterium beam energy of 1.8 MeV. Depending on the adjusted nitrogen flow the target incorporation varies between 0 and about 1∙1016 N∙cm-2. Further the expected hysteresis behaviour ofnitrogen partial pressure, target voltage and nitrogen concentration at increasing/decreasing nitrogen gas flow is confirmed. The lateral distribution of nitrogen was measured across the diameter of target surface. In the zone of higher erosion (the \"race track\") the nitrogen concentration is 50% lower than in the middle or the edge of the target. A deposition zone in the center of the target could not be detected. By increasing the nitrogen flow into the chamber a saturation in nitrogen content in the target was found at an Ar/N2 flow ratio of about 10%. Assuming nitrogen implantation with a depth of 2.5 nm under the influence of typical target voltage during magnetron sputtering, this saturation is at a concentration value where stoichiomtric TiN is formed. Within the precision of the measurements, a mobile fraction of nitrogen could not determined. The concentration in the target remains unchanged after switching off the magnetron
Development of a Mineral-Specific Sorption Database for Surface Complexation Modeling (Final Report and Manual)
Get PDFRES³T - the Rossendorf Expert System for Surface and Sorption Thermodynamics - is a digitized thermodynamic sorption database, implemented as a relational database. It is mineral-specific and can therefore also be used for additive models of more complex solid phases such as rocks or soils. An integrated user interface helps users to access selected mineral and sorption data, to extract internally consistent data sets for sorption modeling, and to export them into formats suitable for other modeling software. Data records comprise of mineral properties, specific surface area values, characteristics of surface binding sites and their protolysis, sorption ligand information, and surface complexation reactions. An extensive bibliography is also included, providing links not only to the above listed data items, but also to background information concerning surface complexation model theories, surface species evidence, and sorption experiment techniques. The RES³T database is intended for an international use. This requires high standards in availability, consistency and actuality. Therefore the authors of the database decided to couple the database onto an authorization tool
Untersuchung strahleninduzierter Chromosomenaberrationen
Get PDFBestrahlung der Brustdrüsenepithelzellinie MCF-12A mit Röntgenstrahlung aus konventionellen Röntgenröhren und Bestimmung der Dosis-Effekt-Kurv