1,721,015 research outputs found
From Lab to Building: Real-World Integration of Phase Change Materials for Comfort, Energy, and Flexibility
Full text linkpeer reviewedPhase change materials (PCMs) are widely promoted for improving thermal comfort and reducing energy demand in buildings. Yet, most studies remain laboratory- or simulation-based, offering limited insight into real-world performance. This paper bridges that gap by synthesizing evidence from eight full-scale, monitored buildings at Technology Readiness Levels (TRL) 6–9, complemented by insights from an expert focus group. Results show that PCM effectiveness is governed primarily by design integration, not material formulation, with placement depth, control strategy, and climate alignment proving decisive. Across cases, measured performance indicates consistent but conditional benefits: peak indoor temperature reductions of 1–3 °C, heating or cooling load savings of 10–25 %, and emerging though under-reported contributions to demand-side flexibility. A typology of PCM integration strategies is proposed, mapping observed outcomes by building type, climate, placement, and control logic. KPI synthesis reveals a previously undocumented trend: a moderate negative correlation between areal storage capacity and comfort-hour improvement, suggesting that greater storage does not necessarily yield better results. The study also identifies structural barriers to deployment, including the regulatory invisibility of latent storage and the absence of standards for building-level PCM testing and certification. By reframing PCMs as integrated building-system components rather than niche materials, this work offers design guidance, performance benchmarks, and a roadmap to advance PCM adoption toward more flexible, resilient buildings.11. Sustainable cities and communities3. Good health and well-being7. Affordable and clean energ
A simple method to measure methane emissions from indoor gas leaks.
Full text linkFrom wellhead to burner tip, each component of the natural gas process chain has come under increased scrutiny for the presence and magnitude of methane leaks, because of the large global warming potential of methane. Top-down measures of methane emissions in urban areas are significantly greater than bottom-up estimates. Recent research suggests this disparity might in part be explained by gas leaks from one of the least understood parts of the process chain: behind the gas meter in homes and buildings. However, little research has been performed in this area and few methods and data sets exist to measure or estimate them. We develop and test a simple and widely deployable closed chamber method that can be used for quantifying indoor methane emissions with an order-of-magnitude precision which allows for screening of indoor large volume ("super-emitting") leaks. We also perform test applications of the method finding indoor leaks in 90% of the 20 Greater Boston buildings studied and indoor methane emissions between 0.02-0.51 ft3 CH4 day-1 (0.4-10.3 g CH4 day-1) with a mean of 0.14 ft3 CH4 day-1 (2.8 g CH4 day-1). Our method provides a relatively simple way to scale up indoor methane emissions data collection. Increased data may reduce uncertainty in bottom-up inventories, and can be used to find super-emitting indoor emissions which may better explain the disparity between top-down and bottom-up post-meter emissions estimates
Reconciling chemical flame retardant exposure and fire risk in domestic furniture
No full textIntroduction: Evidence suggests that standards for resistance of furniture to ignition may lead to an increase in use of chemical flame retardants (CFRs). This is motivating the development of new approaches that maintain high levels of fire safety while facilitating a reduction in use of CFRs. However, reconciling potential fire risk with use of CFRs in relation to specific policy objectives is challenging. Objectives: To inform the development of a new policy in the UK for the fire safety of furniture, we developed for domestic furniture quantitative models of fire risk and potential for CFR exposure. We then combined the models to determine if any lower fire risk, higher CFR exposure categories of furniture were identifiable. Methods: We applied a novel mixed-methods approach to modelling furniture fire risk and CFR exposure in a data-poor environment, using literature-based concept mapping, qualitative research, and data visualisation methods to generate fire risk and CFR exposure models and derive furniture product rankings. Results: Our analysis suggests there exists a cluster of furniture types including baby and infant products and pillows that have comparable overall properties in terms of lower fire risk and higher potential for CFR exposure. Discussion: There are multiple obstacles to reconciling fire risk and CFR use in furniture. In particular, these include a lack of empirical data that would allow absolute fire risk and exposure levels to be quantified. Nonetheless, it seems that our modelling method can potentially yield meaningful product clusters, providing a basis for further research
Reconciling chemical flame retardant exposure and fire risk in domestic furniture
Full text linkIntroduction: Evidence suggests that standards for resistance of furniture to ignition may lead to an increase in use of chemical flame retardants (CFRs). This is motivating the development of new approaches that maintain high levels of fire safety while facilitating a reduction in use of CFRs. However, reconciling potential fire risk with use of CFRs in relation to specific policy objectives is challenging. Objectives: To inform the development of a new policy in the UK for the fire safety of furniture, we developed for domestic furniture quantitative models of fire risk and potential for CFR exposure. We then combined the models to determine if any lower fire risk, higher CFR exposure categories of furniture were identifiable. Methods: We applied a novel mixed-methods approach to modelling furniture fire risk and CFR exposure in a data-poor environment, using literature-based concept mapping, qualitative research, and data visualisation methods to generate fire risk and CFR exposure models and derive furniture product rankings. Results: Our analysis suggests there exists a cluster of furniture types including baby and infant products and pillows that have comparable overall properties in terms of lower fire risk and higher potential for CFR exposure. Discussion: There are multiple obstacles to reconciling fire risk and CFR use in furniture. In particular, these include a lack of empirical data that would allow absolute fire risk and exposure levels to be quantified. Nonetheless, it seems that our modelling method can potentially yield meaningful product clusters, providing a basis for further research
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
- …
