7,616 research outputs found
Traffic flow on pedestrianized streets
No full textGreen Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Transport and Plannin
On the post-impact fatigue behavior and theoretical life prediction of CF/PEEK-titanium hybrid laminates using an energy dissipation approach
No full textThis paper aims to illustrate the effect of the impact damage on fatigue behavior of CF/PEEK-titanium hybrid laminates. To achieve this end, a fatigue life model was proposed to predict the S–N curves of the laminates at various initial impact energy levels and stress ratios based on the energy dissipation approach. The energy dissipation behavior of the laminates during fatigue loading under different experimental conditions was analyzed through a large amount of post-impact fatigue tests, and the correlation between the initial impact damage and the total fatigue dissipation energy was determined. The full-field axial strain distribution of the titanium layer on the impacted side of the laminate was characterized in terms of initial impact energy level and maximum stress using digital image correlation, and then the post-impact fatigue failure mechanism of CF/PEEK-Ti hybrid laminates was summarized. Finally, the validity of the proposed model was verified by fatigue tests under other conditions of stress ratio and impact energy level. It is worth mentioning that the proposed model is also applicable to other types of FMLs, and can accurately predict the residual fatigue life of laminates after impact with only one set of S–N curve data.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Structural Integrity & Composite
Novel thermomechanical characterization for shrinkage evolution of unidirectional semi-crystalline thermoplastic prepregs (PPS/CF) in melt, rubbery and glassy states
No full textShrinkages, distortions and high residual stresses in the thermoplastic composite parts are induced due to high processing temperature, anisotropy, and fiber–matrix shrinkage mismatch. In this paper the shrinkages have been investigated experimentally and modeled by thermo-mechanical constitutive equations for PolyPhenylene Sulfide (PPS) and the unidirectional Carbon Fiber (PPS/CF) composite prepreg. The thermal shrinkage and the crystallization shrinkage were retrieved from Thermal Mechanical Analysis and compared to a Pressure specific volume Temperature diagram. To describe the crystallization shrinkage in the cooling process accurately, the crystallization kinetics of PPS was evaluated using Differential Scanning Calorimetry. The temperature-dependent elastic modulus was measured by a shear rheometer to formulate a new constitutive model. The mathematical model for shrinkage was validated by a press consolidated [0]12 laminate and unbalanced laminates in four lay-ups. The thermo-mechanical model results presented here provide significant rules for the thermomechanical and shrinkage predictions for the industrial applications of thermoplastic composite.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Aerospace Manufacturing Technologie
Effects of SiC content on the mechanical and thermophysical properties of 3D C<sub>f</sub>/SiC–Al composites
No full text3D Cf/SiC–Al composites were achieved through the pressure infiltration of liquid Al–Si alloy into porous 3D Cf/SiC preform, which was produced by different cycles of precursor infiltration and pyrolysis. The effect of silicon carbide volume fraction on the microstructure, anisotropic mechanical response, and thermophysical characteristics of the 3D Cf/SiC–Al composites was investigated. The results demonstrated that the initial microstructure of 3D Cf/SiC can be retained, and the obtained Cf/SiC–Al composites presented remarkable anisotropy characteristics. As the silicon carbide ceramics content increased from 12.5 vol% to 41.8 vol%, the thermal conductivity and thermal expansion coefficient of 3D Cf/SiC–Al composites decreased, whereas the bending strength initially increased and then decreased in the Z-direction. The bending strength perpendicular (Z) to the carbon cloth layer of 3D Cf/SiC–Al composites was higher than that of parallel (X–Y) to the carbon cloth layer. However, a significant anisotropy in the thermal conductivity values was the opposite. The 3D Cf/SiC–Al composite with 1ow ceramic content (17 vol%) had a higher thermal conductivity in the X–Y direction (64 W m−1 K−1) than in the Z-direction (34 W m−1 K−1). The thermal expansion coefficient of all the 3D Cf/SiC–Al composites along the X–Y direction also decreased initially and then increased in the range of 100–450 °C, which presents low expansion characteristics.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.QN/Groeblacher La
On the fracture behaviour of aerospace-grade Polyether-ether-ketone composite-to-aluminium adhesive joints
No full textThe inherently low surface energy of carbon fibre reinforced Polyether-ether-ketone (CF/PEEK) composites results in an extremely low compatibility with adhesives. This subsequently causes significant challenges in the adhesive joining of them to other dissimilar materials. Herein, the bonding surfaces of the CF/PEEK composites were treated by a high-power UV-irradiation technique prior to the adhesive bonding, with an attempt to develop hybrid composite-to-aluminium joints with excellent fracture resistance. The mode-I, mode-II and mix-mode fracture behaviour of CF/PEEK-to-aluminium joints bonded by two commercial aerospace adhesives was evaluated. Cohesive failure within the adhesive layers or substrate damage to the CF/PEEK composites were observed in all the cases. This indicated that the adhesion between the CF/PEEK composites and the adhesives was sufficient to prevent an adhesive failure at the composite/adhesive interfaces under different fracture modes. This study explored an effective route to develop strong and tough CF/PEEK-to-aluminium joints for aerospace applications. Additionally, it revealed that the form of the adhesive supporting carrier was a key factor affecting the fracture behaviour and fracture energies of the adhesive joints.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Structural Integrity & Composite
Modeling the impact of lane-changing's anticipation on car-following behavior
No full textLane-changing (LC) in congested traffic has been identified as a trigger for the sudden deceleration behavior of the new follower in the target lane, leading to severe traffic disturbances. Thus, investigating the response of the new follower to an LC maneuver is an important research topic in the literature. To date, numerous efforts have been devoted to understanding the impact of the lane changer on the new follower after the insertion, while less attention has been given to this influence during the pre-insertion stage (anticipation). Therefore, this paper aims to establish a new car-following (CF) model to capture the new follower's driving behavior during anticipation. Specifically, we introduce an attention mechanism deviating from Newell's CF rules to quantify the impact of anticipation. Then, we apply a neural network with an attention layer to estimate the attention mechanism and incorporate it into the Newell CF model, which yields a new CF model, denoted as CF_Attention. Using real-world trajectory data, we design three experiments and select three representative CF models to validate the CF_Attention. The results indicate that the CF_Attention outperforms the other models in predicting the new follower's trajectory, which is not affected by the heterogeneous behavior of the new follower and the anticipation duration. Additionally, the CF_Attention is proven effective in capturing the speed-space relationship and the formation of oscillation. Finally, our transferability test suggests that the CF_Attention is promising for different locations and times without requiring retraining. The results of this study could advance the integration of the LC impact and CF behavior, and could be implemented into commercial traffic simulation programs to describe vehicle movements in traffic flow more accurately.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Transport and Plannin
Phosphorylation and proteome dynamics in pathogen-resistant tomato plants
No full textMicrobial plant pathogens impose a continuous threat on global food production. Similar to disease resistance in mammals, an innate immune system allows plants to recognise pathogens and swiftly activate defence. For the work described in this thesis, the interaction between tomato and the extracellular fungal pathogen Cladosporium fulvum serves as a model system to study host resistance and susceptibility in plant-pathogen interactions. Resistance to C. fulvum in tomato plants follows the gene-for-gene hypothesis, which requires the presence of a Cf resistance gene in tomato and presence of the cognate avirulence gene (Avr) in C. fulvum. Upon perception of the Avr by a tomato plant, a typical hypersensitive response (HR) is induced that renders the plant resistant to C. fulvum. In the years preceding this thesis work, most research was focussed on understanding which Avrs are produced by C. fulvum and how these Avrs are actually perceived by resistant plants (Chapter 1). The goal of the work described in this thesis is to reveal downstream signalling cascades triggered upon Avr perception. Therefore, the HR was studied by using a model system in which the Cf-4 protein of tomato and the Avr4 protein from C. fulvum were simultaneously expressed in tomato seedlings. Since the Cf-4/Avr-induced responses are inhibited at 33°C and high humidity, these Cf-4/Avr4 seedlings initiate a synchronized and reproducible HR after incubation at 33°C and a subsequent shift to 20°C, which allows studying downstream responses. To prevent pathogen proliferation in the resistant plant, defence signalling cascades need to be activated extremely fast upon pathogen recognition. Therefore, many downstream signalling cascades depend on post-translational modifications (PTMs) that allow a rapid, reversible, controlled and highly specific transduction of perceived signals. An overview of the various types of PTMs and their role in the resistance response of plants to pathogens is provided in Chapter 2. In addition, examples are provided of successful pathogens that manipulate PTMs. Protein phosphorylation seems to play an important role in the Cf-4/Avr4-triggered HR, since Avr4 perception leads to the specific activation of at least three mitogen-activated protein kinases, LeMPK1, -2 and -3, which requires phosphorylation by an upstream kinase (Chapter 3). Each of these three kinases seems to have a different role in downstream defence signalling, since the kinases were shown to have different phosphorylation specificities and therefore most likely have different downstream target substrates. Furthermore, these kinases appear to play a different role with regard to HR and full resistance to C. fulvum in tomato (Chapter 3). Since protein phosphorylation was shown to play an important role in Cf-4/Avr4-induced defence signalling, the phosphoproteome of Cf-4/Avr4 and control seedlings after HR initiation was studied using a new approach (Chapter 4). This approach led to the identification of 50 phosphoproteins, most of which have not been described in tomato before. Quantification revealed 13 phosphoproteins with an altered abundance in the Cf-4/Avr4 seedlings as compared to the control, which implies HR-induced differential phosphorylation of these proteins. Phosphorylation-mediated regulation of the activity of these proteins pointed to a swift decrease in photosynthetic activity upon HR-initiation, which was confirmed by experiments in which the actual efficiency of the photosynthesis in the Cf-4/Avr4 seedlings was determined upon induction of the HR. Furthermore, a shift from aerobic to anaerobic respiration, which possibly results from oxygen depletion caused by a massive oxidative burst consuming large amounts of oxygen, seems to take place upon initiation of the HR. Finally, differential phosphorylation of the four cytoplasmic isoforms of the Hsp90 chaperone protein was observed, suggesting that they play distinct roles during defence signalling (Chapter 4). In addition to the HR, other associated defence responses are initiated upon recognition of C. fulvum. One of these responses is the secretion of defence-related proteins into the apoplast, which is the environment where C. fulvum operates. Therefore, the dynamics of the apoplastic proteome of resistant, Cf-4-expressing plants and susceptible tomato plants lacking Cf-4, were studied after inoculation with a strain of C. fulvum that secretes Avr4 (Chapter 5). Analysis of the apoplastic proteome revealed a slow accumulation of defence proteins in the apoplast of susceptible plants, which is most likely the result of perception of general elicitors of C. fulvum by tomato. In resistant plants, the same set of proteins accumulates in the apoplast, but this occurs much faster and to higher levels. The accelerated response is caused by the Cf-4/Avr4-initiated HR that also leads to cell death. The HR, in combination with the accelerated protein secretion, renders the plants resistant to C. fulvum. In addition, in susceptible plants C. fulvum seems to specifically downregulate genes encoding cell wall proteins of which the accumulation possibly hampers nutrient and water uptake and thereby proliferation of the pathogen in the tomato apoplast. Possibly, an effector of C. fulvum targets a receptor for general elicitors, thereby suppressing transcription of these genes (Chapter 5). Most data described in this thesis have been obtained from Cf-4/Avr4 seedlings in which the HR can be inhibited by incubating the plants at 33°C. The present data suggest that this temperature-sensitivity occurs at the site of signal perception. Possibly, cytoplasmic Hsp90 stabilizes R protein complexes localized at the plasma membrane. Upon high temperature stress, an increased demand for Hsp90 occurs in the cells to stabilize unfolding proteins that play a role in basal cellular processes, which could lead to the release and subsequent degradation of R protein complexes, rendering defence signalling temperature-sensitive (Chapter 6). The temperature-sensitivity of the Cf-4/Avr4-initiated HR provides a very clean and reproducible tool to study the HR, in the absence of the fungus that produces the Avr. Furthermore, the data described in this thesis provide evidence that the Cf-4/Avr4 seedlings recover from the temperature stress before the specific Cf-4/Avr4-triggered HR is initiated. The possibility to separate the events directly associated with the HR from the full resistance response of the plant to the invading fungus, provides new insight into the complexity of plant defence responses and their specific suppression upon successful colonization by C. fulvum (Chapter 6). Comparison of the defence response to other processes that occur in the cell underlines that resistance and HR execution cannot be seen as an independent and separate process in resistant plants that have recognized a pathogen. On the contrary, signalling cascades seem to depend on similar components and on cascades that possibly converge, eventually leading to a similar response (Chapter 6). Finally, an up to date model for the Cf-4/Avr4-triggered HR and resistance is proposed, based on data that have been published before and the results obtained with the research described in this thesis (Chapter 6). <br/
source code for CF 2020 AE processing
No full textThis is a source code file for CF 2020 AE processing.
If you have any questions, please connect me. ([email protected]
Columbus Survey 2010 Results: Guideposts Point to Growth
Full text linkWith this report, CF Insights' aim is to share a snapshot of community foundation asset growth and activity during 2010. The findings are based on over 250 community foundation responses to the Columbus Survey as of March 2011.Participants interested in detailed 2010 results for their foundation can visit www.cfinsights.org to find a wider range of comparative and longitudinal reports. CF Insights members can compare their 2010 performance to peer benchmarks in over 60 online reports. Available metrics focus on asset development, grantmaking, investment performance, and sustainability.And for those community foundations who have not yet contributed data, there is still time. We encourage you to share your 2010 results and use the resources at www.cfinsights.org to create custom reports that put your own foundation's performance in context.As more foundations contribute and 990s are completed, more comparative data will be available and CF Insights will continue to build on this snapshot with analyses based on the growing data set
- …
