1,720,963 research outputs found
블록 공중합체 패턴을 이용한 이차원 이황화 몰리브덴의 광학 및 전기적 특성 조절에 관한 연구
학위논문(석사) - 한국과학기술원 : 신소재공학과, 2015.2
,[vii, 64 p. :]정보 기술이 발전 할수록 전자 기기 및 장비의 집적도는 날로 향상되어 가고 있다. 하지만, 기존에 사용하던 기술이 한계에 봉착하여, 다른 방향의 해결책이 필요 한 경우도 다수 존재한다. 그 중 한가지 예가 소자의 크기가 감소할수록 Off 전류를 제어하기 힘들어지기 때문에 발생하는 short channel effect 이다. 최근 Graphene을 비롯한 이차원 물질의 연구가 활발히 이루어 지고 있는데, 이는 원자단위의 두께로 인한 양자 구속 효과로 인해 앞서 제시한 문제점을 해결 할 수 있을 뿐만 아니라, 더 빠르고, 저전력의 전자 소자를 제작하는데 유용한 재료이기 때문이다.
하지만, Graphene은 밴드 갭이 없다는 특징으로 인해, 반도체로 사용하는 것에 어려움을 겪고 있다. 나노 크기의 패터닝이나, 기능성 기를 추가하여 밴드 갭을 발생 시키는 연구가 진행 되었으나, 그 밴드 갭의 크기는 실제 사용할 정도로 크지 않기 때문에 Graphene 기반의 전계 효과 트랜지스터 (FET)의 On/Off ratio는 낮은 수준에 머물러있다.
최근에 Graphene 과 유사한 형태의 이차원 물질, 특히 전이금속 - 칼코겐 화합물의 연구가 활발히 진행 되고 있다. TMDs 라고 불리는 물질 중 일부는 기본적으로 밴드 갭이 있는 반도체 물질이면서, 1 나노미터 이하 두께를 가지는 등 이차원 물질이 가질 수 있는 장점들도 취하기 때문에, 미래 전자소자에서의 중요한 물질로 자리 매김하고 있다. TMDs 중 가장 많이 연구가 되고 있는 이황화 몰리브덴 (MoS2)의 경우, 원자 층의 수가 줄어들수록 발생하는 양자 구속 효과로 인하여 밴드 갭이 1.2 eV에서부터 약 1.9 eV까지 변화한다고 알려져 있고, 특히 단일 층에서는 밴드 구조가 indirect에서 direct로 전환되어 발광 특성이 크게 개선된다. 이러한 측면에서 MoS2를 이용한 전자 소자 제작 및 발광 특성을 이용한 연구가 많이 진행되고 있다.
본 연구에서는 MoS2을 주요 재료로 하여, 황 공극의 조절을 통해 그 전기적 특성 및 광학적 특성을 조절 해 보고자 하였다. 일반적으로 반도체의 전기적 특성을 조절하는 공정을 도핑 이라고 하는데, 기존 산업에서 널리 쓰이는 ion implantation 방법의 경우는 실리콘 기반의 두꺼운 매질에 대해서는 효과적으로 적용이 가능하나, 이차원 물질과 같이 그 매질이 원자 수준으로 얇은 경우에는 그 매질의 손상으로 인해 적용하기가 어려운 방식이다. 그리하여 다양한 측면에서 도핑을 하는 방법이 연구되고 있는데, 화학 및 분자 도핑 방법의 경우는 그 효과를 쉽게 확인할 수 있으나, 도핑 효과의 조절자체가 조대하고 도핑 시키는 물질이 MoS2에 화학적으로 결합하기보다는 표면에서 물리적인 결합을 하여 전하를 주거나, 받는 등의 방법으로 MoS2의 전기적 특성을 조절하는 특징을 가지고 있다. 반면, 플라즈마를 이용하여 ion을 MoS2 격자에 직접 침투시키는 방법은 그 공정의 특성상 균일도 측면과 공정의 조절이 잘 수립되어있고, 그로 인해 비교적 미세하게 조절할 수 있는 장점이 있으나, 앞서 말한 것과 같이 이차원 물질에서는 격자 손상이 곧 물질의 식각과 같기 때문에, 실질적으로 ‘원자 층 수준의’ 이차원 물질에서는 적용이 어려운 측면이 있다.
이러한 문제를 개선하고, 체계적인 실험을 위해서 본 연구에서는 블록 공중합체를 사용하여 제작한 자기 조립된 나노 사이즈의 실리카 패턴을 MoS2위에 형성시키고, 이를 플라즈마에 대한 마스크로 삼아 MoS2에서의 전체적인 화학양론적 비율을 조절하려 하였다. 블록 공중합체를 활용한 리소그래피 방식은 나노 사이즈의 패턴을 형성할 수 있다는 측면에서 미래 소자 제작 방법으로 크게 각광받고 있는 방식이다. 기계적 에칭은 Ar 플라즈마를 이용하여 적용 되었고, 실리카 패턴이 없는 MoS2에 적용해 보았을 때 광학적, 전기적 특성이 모두 감소하거나 사라지는 것을 확인하였다. 또한 XPS 분석을 통하여, MoS2에서 황의 비율이 감소하여 전체적으로 황 공극이 다량 생성됨을 확인 할 수 있었다. 황 원소의 공극은 MoS2에서 전자를 공급하는 기본적인 n-도핑 물질로 작용한다.
따라서, 황 공극의 양을 나노 크기로 자기조립 된 블록 공중합체 패턴을 이용하여 조절 함으로써, 도핑 정도를 세세하게 조절할 수 있음을 확인하였다...한국과학기술원 :신소재공학과
Noninvasive and Direct Patterning of High- Resolution Full-Color Quantum Dot Arrays by Programmed Microwetting
Although the commercialization of electroluminescent quantum-dot (QD) displays essentially demands multicolor patterning of QDs with sufficient scalability and uniformity, the implementation of QD patterning in a light emitting diode device is highly challenging, mainly due to the innate vulnerability of QDs and charge-transport layers. Here, we introduce a noninvasive surface-wetting approach for patterning full-color QD arrays on a photoprogrammed hole transport layer (HTL). To achieve noninvasiveness of QD patterning, surface-specific modification of HTLs was performed without degrading their performance. Moreover, engineering the solvent evaporation kinetics allows area-selective wetting of QD patterns with a uniform thickness profile. Finally, multicolor QD patterning was enabled by preventing cross-contamination between different QD colloids via partial fluoroencapsulation of earlier-patterned QDs. Throughout the overall QD patterning process, the optoelectronic properties of QDs and hole-transport layers are well preserved, and prototype electroluminescent quantum dot light-emitting diode arrays with high current efficiency and brightness were realized.
고해상도 자기조립 구조체를 활용한 이차원 물질의 전기 및 광학 특성 제어 연구
학위논문(박사) - 한국과학기술원 : 신소재공학과, 2018.8,[viii, 117 p. :]Recent studies on two-dimensional (2D) materials have shown great promise in the areas of both fundamental physics and potential applications. Among these studies, some have targeted the possibility of potentially replacing Si with 2D semiconducting materials due to their inherent flexibility, high transparency, and excellent carrier transport properties. Although the materials have many benefits that bulk cannot do, several issues are remained, especially its property modification that is important for various application field.
In Chapter 2, I will describe a reliable and universal doping route for few-layer TMDs by employing surface-shielding nanostructures during a plasma-doping process. By locally blocking strategy, I could obtain electrical property modification applied to n- or p-type using various plasma source. Here, I achieved controlling of the n-doping level of few-layer MoS2 via the local generation of extra sulfur vacancies without compromising the carrier mobility.
In Chapter 3, I will describe a new strategy based on the insertion of high-density topographic nanopatterns as a high-frequency supporter between 2D materials and substrate to minimize their contact and to block the substrate-induced undesirable effects. To engineer the substrate geometry, the most prominent factor is naturally optimized using self-assembled nanostructures based on competition of (i) strain energy of film and (ii) sum of attractive energies. By utilizing ultimately short period of nano-supporter, stably suspended architecture accompany with performance enhancement was achieved.
In Chapter 4, I will describe a highly effective spacer material for atomically thin materials. I integrated plasmonic structures, 2D materials, and self-assembled gap spacer to achieve minimized field decay that is reaching 2D materials, I utilized NHS structures as an expanded manners for low n and ε spacer. Based on the integrated hybrid structures with monolayer MoS2 on NHS and ARA, PL intensity of MoS2 is drastically enhanced for ~ 6.3 times with elimination of charge transfer between both materials.
By employment of self-assembled block copolymer patterns, and integration with two-dimensional materials, it is promising era based on its simplicity of processing and effectiveness on performance enhancement. Therefore, usage of BCP would be expandable for various low-dimensional applications fields.한국과학기술원 :신소재공학과
Going Beyond Counting First Authors in Author Co-citation Analysis
The present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
We provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
We conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
We have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
