196,177 research outputs found
An architecture for a mitigated FPGA multi-gigabit transceiver for high energy physics environments
SRAM-based Field Programmable Gate Array (FPGA) logic devices are very attractive in applications where high data throughput is needed, such as the latest generation of High Energy Physics (HEP) experiments. FPGAs have been rarely used in such experiments because of their sensitivity to radiation. The present paper proposes a mitigation approach applied to commercial FPGA devices to meet the reliability requirements for the front-end electronics of the Liquid Argon (LAr) electromagnetic calorimeter of the ATLAS experiment, located at CERN. Particular attention will be devoted to define a proper mitigation scheme of the multi-gigabit transceivers embedded in the FPGA, which is a critical part of the LAr data acquisition chain. A demonstrator board is being developed to validate the proposed methodology. Mitigation techniques such as Triple Modular Redundancy (TMR) and scrubbing will be used to increase the robustness of the design and to maximize the fault tolerance from Single-Event Upsets (SEUs)
Mitigated FPGA design of multi-gigabit transceivers for application in high radiation environments of High Energy Physics experiments
SRAM-based Field Programmable Gate Array (FPGA) logic devices are very attractive in applications where high data throughput is needed, such as the latest generation of High Energy Physics (HEP) experiments. FPGAs have been rarely used in such experiments because of their sensitivity to radiation. The present paper proposes a mitigation approach applied to commercial FPGA devices to meet the reliability requirements for the front-end electronics of the Liquid Argon (LAr) electromagnetic calorimeter of the ATLAS experiment, located at CERN. Particular attention will be devoted to define a proper mitigation scheme of the multi-gigabit transceivers embedded in the FPGA, which is a critical part of the LAr data acquisition chain. A demonstrator board is being developed to validate the proposed methodology. Mitigation techniques such as Triple Modular Redundancy (TMR) and scrubbing will be used to increase the robustness of the design and to maximize the fault tolerance from Single-Event Upsets (SEUs)
Actor-Oriented Design Of Embedded Hardware And Software Systems
Semantics In order to preserve the specialization of models of computation while also building general models overall, we concentrate on the hierarchical composition of heterogeneous models of computation. The composition of arbitrary models of computation is made tractable by an abstract semantics, which abstracts how communication and flow of control work. The abstract semantics is (loosely speaking) not the union of 250 E. A. Lee, S. Neuendor#er & M. J. Wirthlin interesting semantics, but rather the intersection. It is abstract in the sense that it represents the common features of models of computation as opposed to their collection of features
Dismantling of a breakthrough: the Kyoto Protocol - just symbolic policy!
We show that U.S. withdrawal from the Kyoto Protocol is straightforward under political economy considerations. The reason is that U.S. compliance costs exceed low willingness to pay for dealing with global warming in the U.S. The withdrawal had a crucial impact on the concretion of the Protocol prior to its likely ratification at the end of 2002. Remaining non-EU Parties to the Kyoto Protocol gained veto bargaining power and, thus, were successful in asserting far reaching concessions from the EU on sink credits and tradability of emission rights. Taking these concessions into account, the Kyoto Protocol was essentially reduced to a symbolic treaty that codifies more or less business-as-usual emissions and makes compliance a rather cheap deal. --climate policy,political economy,willingness to pay
Dr. Duane M. Jackson, Morehouse College, July 2011
This video is a conversation with Dr. Duane M. Jackson. Dr. Jackson talks about his paper, "Recall and the Serial Position Effect: The Role of Primacy and Recency on Accounting Students' Performance." Jackie Daniel, AUC Woodruff Library, is the interviewer
"Reflections on the subject of Emigration from Europe with a view to Settlement in the United States" By M. Carey.
"Reflections on the subject of Emigration from Europe with a view to Settlement in the United States: containing bried sketches of the moral and political character of those states.
By M. Carey, member of the American philosophical, and of the American Antiquarian Society, and author of The Olive Branch, Cindiciae Hibernicae, essays on banking, on political economy, and on internal improvement.
To which are now added the English editor's comments on the subject; together with Important Advice to Emigrants, and Cautions Against Impositions Practiced in the Outports
Dispelling the Myths Behind First-author Citation Counts
We conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
Dr. Glendon Swarthout
Hosted by Roger M. Busfield, MSU Assistant Professor of Speech and Theater, Meet the Author is designed to introduce a general audience to a contemporary author and their work through in-depth interviews. This episode features a conversation between Dr. Glendon Swarthout, prolific author and English professor at MSU, and assistant professors Sam S. Baskett and Theodore B. Strandness
Simulation of thermal plant optimization and hydraulic aspects of thermal distribution loops for large campuses
Following an introduction, the author describes Texas A&M University and its utilities system. After that, the author presents how to construct simulation models for chilled water and heating hot water distribution systems. The simulation model was used in a $2.3 million Ross Street chilled water pipe replacement project at Texas A&M University. A second project conducted at the University of Texas at San Antonio was used as an example to demonstrate how to identify and design an optimal distribution system by using a simulation model. The author found that the minor losses of these closed loop thermal distribution systems are significantly higher than potable water distribution systems. In the second part of the report, the author presents the latest development of software called the Plant Optimization Program, which can simulate cogeneration plant operation, estimate its operation cost and provide optimized operation suggestions. The author also developed detailed simulation models for a gas turbine and heat recovery steam generator and identified significant potential savings. Finally, the author also used a steam turbine as an example to present a multi-regression method on constructing simulation models by using basic statistics and optimization algorithms. This report presents a survey of the author??s working experience at the Energy Systems Laboratory (ESL) at Texas A&M University during the period of January 2002 through March 2004. The purpose of the above work was to allow the author to become familiar with the practice of engineering. The result is that the author knows how to complete a project from start to finish and understands how both technical and nontechnical aspects of a project need to be considered in order to ensure a quality deliverable and bring a project to successful completion. This report concludes that the objectives of the internship were successfully accomplished and that the requirements for the degree of Degree of Engineering have been satisfied
Intern experience at CH���M Hill, Inc.: an internship report
Includes author's vita"Submitted to the College of Engineering of Texas A&M University in partial
fulfillment of the requirement for the degree of Doctor of Engineering."Includes bibliographical referencesA review of the author's internship experience with CH���M HILL, Inc.
during the period September 1975 through May 1976 is presented. During this nine month
internship the author worked as an Engineer II in the Industrial Processes discipline of this
large consulting engineering firm... The author's prime responsibility was as one of three
lead design engineers on the design of a large wastewater treatment facility for a pulp mill
in Hoquiam, Washington owned by ITT Rayonier Inc. The work generally consisted of the design
of individual treatment units and associated piping and pumping. The purpose of the project
was to provide wastewater treatment capabilities that would satisfy the effluent limitations
(standards) imposed upon the mill by the State of Washington Department of Ecology and the
U.S. Environmental Protection Agency. The author's assignment also entailed necessary
interaction with the project manager and other CH���M HILL design engineers and support staff
members, the client's representatives, and representatives of two other consulting engineering
firms working on the project. Thus, the internship position at CH���M HILL provided considerable
experience coordinating the author's work with the work of other engineers, guiding the design
and administrative efforts of a support staff, and interacting regularly with the client and
other consulting firms. This broad exposure to a variety of engineering and organizational
problems provided a valuable educational experience
- …
