3,473 research outputs found
A 2 h periodic variation in the low-mass X-ray binary Ser X-1
No full textSpectroscopy of the low-mass X-ray binary Ser X-1 using the Gran Telescopio Canarias have revealed a ?2 h periodic variability that is present in the three strongest emission lines. We tentatively interpret this variability as due to orbital motion, making it the first indication of the orbital period of Ser X-1. Together with the fact that the emission lines are remarkably narrow, but still resolved, we show that a main-sequence K dwarf together with a canonical 1.4 M? neutron star gives a good description of the system. In this scenario, the most likely place for the emission lines to arise is the accretion disc, instead of a localized region in the binary (such as the irradiated surface or the stream-impact point), and their narrowness is due instead to the low inclination (?10°) of Ser X-1
Active X-ray optics for the next generation of X-ray space telescopes
No full textDescribed within is the design, manufacture, metrology and X-ray testing of an active X-ray
prototype intended for the next generation of X-ray telescopes. One of the challenges faced by
the X-ray telescope community is how to combine high resolution and high sensitivity into one
system, as weight limitations place constraints on the optics that can be launched. Therefore the
mandate of the active X-ray prototype is to provide high sensitivity through the ability of the optics
to be nested and to deliver high angular resolution through the active control of the optic’s form.
Piezoelectric unimorph actuators provide the active component: it is intended that they will correct
for figure errors within the optic and therefore increase the angular resolution capability.
The prototype’s design is based upon an ellipsoidal segment which provides point-to-point
focussing of an X-ray source. The prototype itself is composed of an electroformed nickel optic
where the non-reflective surface is populated with 30 piezoelectric actuators and it is the production
of the prototype that is the core of the presented research. Metrology of the actuators’ influence
functions is presented and highlight the prototype’s ability to deform its optic surface by microns.
In addition, the measured influence functions are compared against finite element models and a
distinct similarity between the functions is observed.
The prototype was tested at an X-ray beamline facility in November 2008 and the results
showed the prototype’s ability to correct the optic to achieve an improved angular resolution: from
0.786 arc-minutes to 0.686 arc-minutes in terms of full width half maximum. Finally, difficulties
in the manufacture of the prototype and X-ray testing shall be presented alongside future work in
conclusion to this thesis
New insights on accretion in supergiant fast X-ray transients from XMM-Newton and INTEGRAL observations of IGR J17544-2619
No full textXMM–Newton observations of the supergiant fast X-ray transient IGR J17544?2619 are reported and placed in the context of an analysis of archival INTEGRAL/IBIS data that provide a refined estimate of the orbital period at 4.9272?±?0.0004?d. A complete outburst history across the INTEGRAL mission is reported. Although the new XMM–Newton observations (each lasting ?15 ks) targeted the peak flux in the phase-folded hard X-ray light curve of IGR J17544?2619, no bright outbursts were observed, the source spending the majority of the exposure at intermediate luminosities of the order of several 1033?erg?s?1 (0.5–10 keV) and displaying only low level flickering activity. For the final portion of the exposure, the luminosity of IGR J17544?2619 dropped to ?4?×?1032?erg?s?1 (0.5–10 keV), comparable with the lowest luminosities ever detected from this source, despite the observations being taken near to periastron. We consider the possible orbital geometry of IGR J17544?2619 and the implications for the nature of the mass transfer and accretion mechanisms for both IGR J17544?2619 and the supergiant fast X-ray transients (SFXTs) population. We conclude that accretion under the ‘quasi-spherical accretion’ model provides a good description of the behaviour of IGR J17544?2619 and suggests an additional mechanism for generating outbursts based upon the mass accumulation rate in the hot shell (atmosphere) that forms around the neutron star under the quasi-spherical formulation. Hence, we hope to aid in explaining the varied outburst behaviours observed across the SFXT population with a consistent underlying physical model
Recommended from our members
Enhanced colour encoding of materials discrimination information for multiple view dual-energy x-ray imaging
No full textThis thesis reports an investigation into dual-energy X-ray discrimination techniques. These techniques are designed to provide colour-coded materials discrimination information in a sequence of perspective images exhibiting sequential parallax. The methods developed are combined with a novel 3D imaging technique employing depth from motion or kinetic depth effect (KDE). This technique when applied to X-ray images is termed KDEX imaging and was developed previously by the university team for luggage screening applications at security checkpoints. A primary motivation for this research is that the dual-energy X-ray techniques, which are routinely incorporated into ‘standard’ 2D luggage scanners, provide relatively crude materials discrimination information. In this work it was critical that robust materials discrimination and colour encoding process was implemented as the sequential parallax exhibited by the KDEX imagery may introduce colour changes, due to the different X-ray beam paths associated with each perspective image. Any introduction of ‘colour noise’ into the resultant image sequences could affect the perception of depth and hinder the ongoing assessment of the potential utility of the dual-energy KDEX technique. Two dual-energy discrimination methods have been developed, termed K-II and W-E respectively. Employing the total amount of attenuation measured at each energy level and the weight fraction of layered structures, a combination of the K-II and the W-E techniques enables the computation and extraction of a target objects’ effective atomic number (Zeff) and its surface density (ρS) in the presence of masking layers
The nature of the X-ray transient MAXI J0556−332
No full textPhase-resolved spectroscopy of the newly discovered X-ray transient MAXIJ0556-332 has revealed the presence of narrow emission lines in the Bowen region that most likely arise on the surface of the mass donor star in this low-mass X-ray binary. A period search of the radial velocities of these lines provides two candidate orbital periods (16.43 ± 0.12 and 9.754 ± 0.048h), which differ from any potential X-ray periods reported. Assuming that MAXIJ0556-332 is a relatively high-inclination system that harbours a precessing accretion disc in order to explain its X-ray properties, it is only possible to obtain a consistent set of system parameters for the longer period. These assumptions imply a mass ratio of q≃ 0.45, a radial velocity semi-amplitude of the secondary of K 2≃ 190kms -1 and a compact object mass of the order of the canonical neutron star mass, making a black hole nature for MAXIJ0556-332 unlikely. We also report the presence of strong Niii emission lines in the spectrum, thereby inferring a high N/O abundance. Finally, we note that the strength of all emission lines shows a continuing decay over the ≃1 month of our observations
GPU-accelerated depth map generation for X-ray simulations of complex CAD geometries
No full textInteractive x-ray simulations of complex computer-aided design (CAD) models can provide valuable insights for better interpretation of the defect signatures such as porosity from x-ray CT images. Generating the depth map along a particular direction for the given CAD geometry is the most compute-intensive step in x-ray simulations. We have developed a GPU-accelerated method for real-time generation of depth maps of complex CAD geometries. We preprocess complex components designed using commercial CAD systems using a custom CAD module and convert them into a fine user-defined surface tessellation. Our CAD module can be used by different simulators as well as handle complex geometries, including those that arise from complex castings and composite structures. We then make use of a parallel algorithm that runs on a graphics processing unit (GPU) to convert the finely-tessellated CAD model to a voxelized representation. The voxelized representation can enable heterogeneous modeling of the volume enclosed by the CAD model by assigning heterogeneous material properties in specific regions. The depth maps are generated from this voxelized representation with the help of a GPU-accelerated ray-casting algorithm. The GPU-accelerated ray-casting method enables interactive (> 60 frames-per-second) generation of the depth maps of complex CAD geometries. This enables arbitrarily rotation and slicing of the CAD model, leading to better interpretation of the x-ray images by the user. In addition, the depth maps can be used to aid directly in CT reconstruction algorithms.This proceeding may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This proceeding appeared in Grandin, Robert J., Gavin Young, Stephen D. Holland, and Adarsh Krishnamurthy. "GPU-accelerated depth map generation for X-ray simulations of complex CAD geometries." In AIP Conference Proceedings, vol. 1949, no. 1, p. 190002. AIP Publishing LLC, 2018, and may be found at
DOI: 10.1063/1.5031636.
Copyright 2018 Author(s).
Posted with permission
X-ray polarization in relativistic jets
No full textWe investigate the polarization properties of Comptonized X-rays from relativistic jets in active galactic nuclei (AGN) using Monte Carlo simulations. We consider three scenarios commonly proposed for the observed X-ray emission in AGN: Compton scattering of blackbody photons emitted from an accretion disc; scattering of cosmic microwave background (CMB) photons and self-Comptonization of intrinsically polarized synchrotron photons emitted by jet electrons. Our simulations show that for Comptonization of disc and CMB photons, the degree of polarization of the scattered photons increases with the viewing inclination angle with respect to the jet axis. In both cases, the maximum linear polarization is ≈20 per cent. In the case of synchrotron self-Comptonization (SSC), we find that the resulting X-ray polarization depends strongly on the seed synchrotron photon injection site, with typical fractional polarizations P≈ 10–20 per cent when synchrotron emission is localized near the jet base, while P≈ 20–70 per cent for the case of uniform emission throughout the jet. These results indicate that X-ray polarimetry may be capable of providing unique clues to identify the location of particle acceleration sites in relativistic jets. In particular, if synchrotron photons are emitted quasi-uniformly throughout a jet, then the observed degree of X-ray polarization may be sufficiently different for each of the competing X-ray emission mechanisms (synchrotron, SSC or external Comptonization) to determine which is the dominant process. However, X-ray polarimetry alone is unlikely to be able to distinguish between disc and CMB Comptonization
Sensitivity of CTA to gamma-ray emission from the Perseus galaxy cluster
No full textIn these proceedings we summarize the current status of the study of the sensitivity of the Cherenkov Telescope Array (CTA) to detect diffuse gamma-ray emission from the Perseus galaxy cluster. Gamma-ray emission is expected in galaxy clusters both from interactions of cosmic rays (CR) with the intra-cluster medium, or as a product of annihilation or decay of dark matter (DM) particles in case they are weakly interactive massive particles (WIMPs). The observation of Perseus constitutes one of the Key Science Projects to be carried out by the CTA Consortium. In this contribution, we focus on the DM-induced component of the flux. Our DM modelling includes the substructures we expect in the main halo which will boost the annihilation signal significantly. We adopt an ON/OFF observation strategy and simulate the expected gamma-ray signals. Finally we compute the expected CTA sensitivity using a likelihood maximization analysis including the most recent CTA instrument response functions. In absence of signal, we show that CTA will allow us to provide stringent and competitive constraints on TeV DM, especially for the case of DM decay. © Copyright owned by the author(s) under the terms of the Creative Commons
Periodicities in the high-mass X-ray binary system RXJ0146.9+6121/LSI+61 235
No full textThe high-mass X-ray binary RX J0146.9+6121, with optical counterpart LS I+61°235 (V831 Cas), is an intriguing system on the outskirts of the open cluster NGC 663. It contains the slowest Be type X-ray pulsar known with a pulse period of around 1400 s and, primarily from the study of variation in the emission line profile of Hα, it is known to have a Be decretion disc with a one-armed density wave period of approximately 1240 d. Here we present the results of an extensive photometric campaign, supplemented with optical spectroscopy, aimed at measuring short time-scale periodicities. We find three significant periodicities in the photometric data at, in order of statistical significance, 0.34, 0.67 and 0.10 d. We give arguments to support the interpretation that the 0.34 and 0.10 d periods could be due to stellar oscillations of the B-type primary star and that the 0.67 d period is the spin period of the Be star with a spin axis inclination of 23+10−8 degrees. We measured a systemic velocity of −37.0 ± 4.3 km s−1 confirming that LS I+61°235 has a high probability of membership in the young cluster NGC 663 from which the system's age can be estimated as 20–25 Myr. From archival RXTE All Sky Monitor (ASM) data we further find ‘super’ X-ray outbursts roughly every 450 d. If these super outbursts are caused by the alignment of the compact star with the one-armed decretion disc enhancement, then the orbital period is approximately 330 d
Gamma-ray performance study of the HERD payload
No full textThe High Energy cosmic-Radiation Detection (HERD) facility has been proposed as a space astronomy payload onboard the future China's Space Station. HERD is planned for operation starting around 2027 for about 10 years In addition to the unprecedented sensitivity for dark matter searches and cosmic-ray measurements up to the knee energy, it should perform gamma-ray monitoring and full sky survey from few hundred MeV up to tens of TeV. We present the first study of the HERD gamma-ray performance obtained with full simulations of the whole detector geometry. HERD will be a cubic detector composed with 5 active faces. We present a study conducted inside the HERD analysis software package, which includes a detailed description of the detector materials. In this work we present the HERD effective area, the point spread function and the resulting gamma-ray sensitivity. © Copyright owned by the author(s) under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY-NC-ND 4.0
- …
