169,960 research outputs found
Going Beyond Counting First Authors in Author Co-citation Analysis
No full textThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Mitomycin C in highly myopic eyes - Author reply
No full textOphthalmology. 2005 Feb;112(2):208-18; discussion 219.
Mitomycin C modulation of corneal wound healing after photorefractive keratectomy in highly myopic eyes.
Gambato C, Ghirlando A, Moretto E, Busato F, Midena E.
SourceRefractive Surgery Service and Antimetabolite Therapy Research Unit, Department of Ophthalmology, University of Padova, Padova, Italy.
Abstract
PURPOSE: To evaluate the role of topical mitomycin C in corneal wound healing (CWH) after photorefractive keratectomy (PRK) in highly myopic eyes.
DESIGN: Prospective, double-masked, randomized clinical trial.
PARTICIPANTS: Seventy-two eyes of 36 patients affected by high (>7 diopters) myopia.
METHODS: In each patient, one eye was randomly assigned to PRK with intraoperative topical 0.02% mitomycin C application, and the fellow eye was treated with a placebo. Postoperatively, mitomycin C-treated eyes received artificial tears (3 times daily, tapered in 3 months), whereas the fellow eye was treated with fluorometholone sodium 2% and artificial tears (3 times daily, tapered in 3 months).
MAIN OUTCOME MEASURES: Uncorrected visual acuity (UCVA) and best-corrected visual acuity (BCVA), contrast sensitivity, manifest refraction, and biomicroscopy. Contrast sensitivity was determined using the Pelli-Robson chart. Corneal confocal microscopy documented CWH.
RESULTS: Mean follow-up was 18 months (range, 12-36). No side effects or toxic effects were documented. At 12-month follow-up examination, UCVAs (logarithm of the minimum angle of resolution) were 0.4+/-0.48 and 0.5+/-0.53 (P = .03) in mitomycin C-treated eyes and corticosteroid-treated eyes, respectively. At 1 year, corneal haze developed in 20% of corticosteroid-treated eyes, versus 0% of mitomycin C-treated eyes. At 12, 24, and 36 months, corneal confocal microscopy showed activated keratocytes and extracellular matrix significantly more evident in untreated eyes (Ps = 0.004, 0.024, and 0.046, respectively).
CONCLUSION: Topical intraoperative application of 0.02% mitomycin C can reduce haze formation in highly myopic eyes undergoing PRK.
Comment in
Ophthalmology. 2006 Feb;113(2):357; author reply 357-8
Dispelling the Myths Behind First-author Citation Counts
No full textWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
Clinical response and mortality in tigecycline complicated intra-abdominal infection and complicated skin and soft-tissue infection trials
No full textAn imbalance in all-cause mortality was noted in tigecycline phase 3 and 4 comparative clinical trials across all studied indications. We investigated clinical failure and mortality in phase 3 and 4 complicated skin and soft-tissue infection (cSSTI) and complicated intra-abdominal infection (cIAI) tigecycline trials using descriptive analyses of a blinded adjudication of mortality and multivariate regression analyses. Attributable mortality analyses of cSSTI revealed death due to infection in 0.1% of each treatment group (P = 1.000). In cIAI, there were no significant differences between tigecycline (1.2%) and comparator (0.7%) subjects who died due to infection (P = 0.243). For cIAI clinical failure, treatment interaction with organ dysfunction was observed with no difference observed between clinical cure for tigecycline (85.4%) and comparator (76.7%) treatment groups (odds ratio = 0.58, 95% confidence interval 0.28-1.19). Tigecycline-treated subjects had more adverse events of secondary pneumonias (2.1% vs. 1.2%) and more adverse events of secondary pneumonias with an outcome of death (0.5% vs. 0.1%). These analyses do not suggest that tigecycline is a factor either for failure (cSSTI and cIAI studies) or for death (cIAI studies)
Investigation on minor degraded derivatives of the recombinant hirudin variant HM2 from Hirudinaria Manillensis isolated by isoelectric focusing in multicompartment electrolyzers.
No full textOn isoelectric focusing in immobilized pH gradients (IPG) a preparation of recombinant hirudin from Hirudinaria manillensis, purified to homogeneity, was found to still contain a total of 5% minor components: three with higher pI values (pIs 4.10, 4.25 and 4.31), one with a lower pI value (pI 3.98) as compared with the main form (pI 4.03). Multicompartment electrolyzers with isoelectric membranes and micropreparative IPG gel slabs allowed the recovery of pure fractions of such minor components, which were further characterized by electrospray mass spectra, limited proteolysis, and sequence analysis. All four minor isoforms were found to be cleavage products of the parent, full-length hirudin molecule (molecular mass 6797 Da), as follows: the pI 4.31 (5032 Da) had lost sixteen amino acids from the N-terminus, the pI 4.25 (6212 Da) lacked five amino acids from the C-terminus, the pI 4.10 (2980 Da) was a cleavage product at residue Cys(37), and the pI 3.98 (6610 Da) lacked the dipeptide Val-Ser at the N-terminus. Combining the extreme resolving power of IPGs with the high accuracy of mass spectra was found to be an attractive strategy in decoding post-synthetic modifications often encountered in r-DNA proteins
A Multi-Language Comparison of Influences on Author Verification using Character N-Grams
No full textWe create a new multi-language corpus for author verification based on Wikipedia talkpages, and evaluate the influence that differences in topic and time have on character n-gram author profiles. Topic alignment between two texts is found to increase author verification precision, and an authors writing style is found to change over time, but not more significantly after 3 years than after 1 year.Information ArchitectureWISElectrical Engineering, Mathematics and Computer Scienc
A 0.12mm<sup>2</sup> Wien-Bridge Temperature Sensor with 0.1°C (3σ) Inaccuracy from -40°C to 180°C
No full text Resistor-based temperature sensors can achieve much higher resolution and energy efficiency than conventional BJT-based sensors [1], but they typically occupy more area (> 0.25 mm 2 ) and have lower operating temperatures (le 125 {circ} {C}) [2]-[4]. This work describes a 0.12mm 2 resistor-based sensor that uses a Wien-bridge (WB) filter to achieve 0.1 {circ} {C} (3 sigma) inaccuracy from - 40 {circ} {C} to 180 {circ} {C}. Compared to a state-of-the-art WB sensor [4], it occupies 6 × less area and achieves comparable relative accuracy over a 76% wider operating range. Session 10.3 Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic InstrumentationMicroelectronic
Pt(II) and Pd(II) Pyrrolidine-Dithiocarbamates Investigated by XPS
No full textIn the present contribution, a series of four metal dithiocarbamates, namely 1-pyrrolidinecarbodithioate methyl ester (PyDTM) of Pd(II) and Pt(II), PtCl2(PyDTM), PtBr2(PyDTM), PdBr2(PyDTM), PdCl2(PyDTM), were analysed by x-ray Photoelectron Spectroscopy (XPS). Besides the wide scan spectra, detailed spectra for the C 1s, O 1s, N 1s, S 2s, S 2p, Pt 4f (for Pt-based compounds), Pd 3d (for Pd-based compounds), Cl 2p (for Cl containing compounds), Br 3p (for Br containing compounds) regions were acquired and the related data are presented and discussed
A ±25A Versatile Shunt-Based Current Sensor with 10kHz Bandwidth and ±0.25% Gain Error from -40°C to 85°C Using 2-Current Calibration
No full textAccurate current sensing is critical in many industrial applications, such as battery management and motor control. Precise shunt-based current sensors have been reported with gain errors of less than 1% over the industrial temperature range (-40°C to 85°C) [1]–[4]. However, since they are intended for coulomb counting, their bandwidth is limited to a few tens of Hz, making them unsuitable for battery impedance or motor-current sensing. This paper presents a current sensor with a wide (10kHz) bandwidth and a tunable temperature compensation scheme (TCS), which allows it to be flexibly used with different types of shunts while maintaining high accuracy. A low-cost room-temperature calibration scheme is proposed to optimize gain flatness over temperature by exploiting the shunt's self-heating at large currents. Over the industrial temperature range and a ±25A current range, it achieves state-of-the-art gain error (±0.25%) with both low-cost PCB and stable metal-alloy shunts.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic InstrumentationMicroelectronic
An Article About Albertus C. Van Raalte, Author Unknown, Except for Parts Taken from an Article by Anna C. Post
No full textAn article about Albertus C. Van Raalte, author unknown, except for parts taken from an article by Anna C. Post. The author knew first generation persons in the Holland settlement and therefore, the article has some value.https://digitalcommons.hope.edu/vrp_1890s/1012/thumbnail.jp
- …
