196,114 research outputs found
Assessment of Average Market Investment Returns in Development of the Residential Real Estate in the Moscow Region
No full textIn the previous work, G.M. Sternik and S.G. Sternik justified the options for the method of assessing the average current annual return on investment in residential real estate development, depending on the nature and content of the initial data on the costs contained in the sources of information (construction costs or total investment costs). Based on the analysis of the composition of the elements of development costs used in various data sources, we corrected the coefficients that allowed us to move from the assessment of the current annual return on investment in development in relation to the cost (full estimated cost) of construction to the assessment of the current annual return on investment in relation to the total investment costs. This calculation method was tested on the example of the housing market inMoscow. As a result, we concluded it is possible its use for investment management in the housing market. In this article, based on G.M. Sternik and S.G. Sternik’s methodology for assessing the return on investment into the development, and taking also into account the increase of information openness of the real estate market, we improved the calculation formulas, using new sources of the initial data, and recalculated the average market return on investment into the development of residential real estate in the Moscow region according to the data available for 2014–2017. We concluded that, since 2015, the average market return on investment takes negative values, i.e. the volume of investment in construction exceeds the revenue from sales in the primary market. However, in the second half of 2017, the indicator has increased to positive values, which was due to a greater extent of the decrease in the volume of residential construction in the region. The data obtained by us, together with the improved method of calculations, allow predicting with high reliability the potential of the development of the regional markets of primary housing for the purpose of investment and state planning of housing construction programs
Compte rendu d’exploitation des groupes de pompage du canal de Moscou (U.R.S.S.)
No full textAccount describing the operation of the pumping units on the Moscow Canal (USSR).
1. General operational results from 25 m3/sec vertical propeller pumps.
2. Design features of B P 250 pump units, and steps taken to modernise them during the 20 years the canal has been in use.
3. Operation of the pumping units as turbines.
4. Anti-cavitation measures for the pumps.
5. Provision of automatic and remote control for the pumps.1° Résultats généraux d'exploitation des pompes-hélices verticales d'un débit de 25 m3/s.
2° Construction des groupes de pompage BP250 et dispositions prises pour leur modernisation au cours des 20 années d'exploitation du canal.
3° Fonctionnement en turbines des groupes de pompage.
4° Dispositions prises peur la lutte contre la cavitation des pompes.
5° Automatisation et téléréglage des groupes de pompage.Roumiantsev A. M., Sternik A. Compte rendu d’exploitation des groupes de pompage du canal de Moscou (U.R.S.S.). In: Turbines et pompes hydrauliques. Compte rendu des cinquièmes journées de l'hydraulique, Aix-en-Provence, 26, 27 et 28 juin 1958. Tome 2, 1959
Dr. Duane M. Jackson, Morehouse College, July 2011
No full textThis video is a conversation with Dr. Duane M. Jackson. Dr. Jackson talks about his paper, "Recall and the Serial Position Effect: The Role of Primacy and Recency on Accounting Students' Performance." Jackie Daniel, AUC Woodruff Library, is the interviewer
"Reflections on the subject of Emigration from Europe with a view to Settlement in the United States" By M. Carey.
No full text"Reflections on the subject of Emigration from Europe with a view to Settlement in the United States: containing bried sketches of the moral and political character of those states.
By M. Carey, member of the American philosophical, and of the American Antiquarian Society, and author of The Olive Branch, Cindiciae Hibernicae, essays on banking, on political economy, and on internal improvement.
To which are now added the English editor's comments on the subject; together with Important Advice to Emigrants, and Cautions Against Impositions Practiced in the Outports
Dispelling the Myths Behind First-author Citation Counts
No full textWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
Dr. Glendon Swarthout
No full textHosted by Roger M. Busfield, MSU Assistant Professor of Speech and Theater, Meet the Author is designed to introduce a general audience to a contemporary author and their work through in-depth interviews. This episode features a conversation between Dr. Glendon Swarthout, prolific author and English professor at MSU, and assistant professors Sam S. Baskett and Theodore B. Strandness
Crystal structure and lattice dynamics of endotaxial FeSi2 nanowires
No full textThe reduction of the dimensions of crystals to the nanometer length scale induces significant deviations in the phonon dispersions and phonon density of states (PDOS) of nanostructures compared to their bulk counterparts and novel vibrational phenomena emerge. I will present recent results of lattice dynamics study of alpha-phase FeSi2 endotaxial nanowires, epitaxially grown on Si(110), as a function of their size [1]. The experimentally obtained Fe-partial PDOS from nuclear inelastic scattering are comprehensively understood by the help of ab initio theory [2]
[1] J. Kalt, M. Sternik, B. Krause, I. Sergueev, M. Mikolasek, D.G. Merkel, D. Bessas, O. Sikora, T. Vitova, J. Göttlicher, R. Steininger, P.T. Jochym, A. Ptok, O. Leupold, H.-C. Wille, A.I. Chumakov, P. Piekarz, K. Parlinski, T. Baumbach and S. Stankov, Phys. Rev. B 102 (2020) 195414 [2] J. Kalt, M. Sternik, B. Krause, I. Sergueev, M. Mikolasek, D. Bessas, O. Sikora, T. Vitova, J. Göttlicher, R. Steininger, P.T. Jochym, A. Ptok, O. Leupold, H.-C. Wille, A. I. Chumakov, P. Piekarz, K. Parlinski, T. Baumbach and S. Stankov, Phys. Rev. B 101 (2020) 16540
Simulation of thermal plant optimization and hydraulic aspects of thermal distribution loops for large campuses
No full textFollowing an introduction, the author describes Texas A&M University and its utilities system. After that, the author presents how to construct simulation models for chilled water and heating hot water distribution systems. The simulation model was used in a $2.3 million Ross Street chilled water pipe replacement project at Texas A&M University. A second project conducted at the University of Texas at San Antonio was used as an example to demonstrate how to identify and design an optimal distribution system by using a simulation model. The author found that the minor losses of these closed loop thermal distribution systems are significantly higher than potable water distribution systems. In the second part of the report, the author presents the latest development of software called the Plant Optimization Program, which can simulate cogeneration plant operation, estimate its operation cost and provide optimized operation suggestions. The author also developed detailed simulation models for a gas turbine and heat recovery steam generator and identified significant potential savings. Finally, the author also used a steam turbine as an example to present a multi-regression method on constructing simulation models by using basic statistics and optimization algorithms. This report presents a survey of the author??s working experience at the Energy Systems Laboratory (ESL) at Texas A&M University during the period of January 2002 through March 2004. The purpose of the above work was to allow the author to become familiar with the practice of engineering. The result is that the author knows how to complete a project from start to finish and understands how both technical and nontechnical aspects of a project need to be considered in order to ensure a quality deliverable and bring a project to successful completion. This report concludes that the objectives of the internship were successfully accomplished and that the requirements for the degree of Degree of Engineering have been satisfied
Intern experience at CH���M Hill, Inc.: an internship report
No full textIncludes author's vita"Submitted to the College of Engineering of Texas A&M University in partial
fulfillment of the requirement for the degree of Doctor of Engineering."Includes bibliographical referencesA review of the author's internship experience with CH���M HILL, Inc.
during the period September 1975 through May 1976 is presented. During this nine month
internship the author worked as an Engineer II in the Industrial Processes discipline of this
large consulting engineering firm... The author's prime responsibility was as one of three
lead design engineers on the design of a large wastewater treatment facility for a pulp mill
in Hoquiam, Washington owned by ITT Rayonier Inc. The work generally consisted of the design
of individual treatment units and associated piping and pumping. The purpose of the project
was to provide wastewater treatment capabilities that would satisfy the effluent limitations
(standards) imposed upon the mill by the State of Washington Department of Ecology and the
U.S. Environmental Protection Agency. The author's assignment also entailed necessary
interaction with the project manager and other CH���M HILL design engineers and support staff
members, the client's representatives, and representatives of two other consulting engineering
firms working on the project. Thus, the internship position at CH���M HILL provided considerable
experience coordinating the author's work with the work of other engineers, guiding the design
and administrative efforts of a support staff, and interacting regularly with the client and
other consulting firms. This broad exposure to a variety of engineering and organizational
problems provided a valuable educational experience
Transition to turbulence in a qblique shock-wave/boundary-layer interaction at M=15
No full textDirect numerical simulations are carried out for different forcing techniques to trigger transition during the interaction between an oblique shock-wave and a laminar boundary-layer at M = 1.5. Three forcing methods are used: a) forcing of oblique unstable modes, whose shape and behaviour are determined by the local linear stability theory, b) broadband free-stream acoustic disturbances, and c) a cold plasma flow control device. While the oblique-mode breakdown is dominant for low-amplitude forcing, long streaky structures drive the transition process in a high-amplitude disturbance environment. LES are also performed on the experimental setup by the Institute of Theoretical and Applied Mechanics (ITAM) from Novosibirsk State University with cold plasma actuation. As well as the disturbance type, the effect of Reynolds number and forcing amplitude will be investigated
- …
