1,720,981 research outputs found
Co-doping of (Bi0.5Na0.5)TiO3: Secondary phase formation and lattice site preference of Co
No full textArt.455901Bismuth sodium titanate (Bi0.5Na0.5)TiO3 (BNT) is considered to be one of the most promising lead-free alternatives to piezoelectric lead zirconate titanate (PZT). However, the effect of dopants on the material has so far received little attention from an atomic point of view. In this study we investigated the effects of cobalt-doping on the formation of additional phases and determined the preferred lattice site of cobalt in BNT. The latter was achieved by comparing the measured x-ray absorption near-edge structure (XANES) spectra to numerically calculated spectra of cobalt on various lattice sites in BNT.(Bi0.5Na0.5)TiO3 + x mol% Co (x = 0.0, 0.5, 1.0, 2.6) was synthesized via solid state reaction. As revealed by SEM backscattering images, a secondary phase formed in all doped specimens. Using both XRD and SEM-EDX, it was identified as Co2TiO4 for dopant levels >0.5 mol%. In addition, a certain amount of cobalt was incorporated into BNT, as shown by electron probe microanalysis. This amount increased with increasing dopant levels, suggesting that an equilibrium forms together with the secondary phase. The XANES experiments revealed that cobalt occupies the octahedral B-site in the BNT perovskite lattice, substituting Ti and promoting the formation of oxygen vacancies in the material.24Nr.4
Thermo-optical-measurement technique TOM to characterize sintering behavior of additive manufactured metallic parts under atmospheric control
No full textFollowing the shrinkage of powder metallurgical samples of unusual shape is possible employing our thermo-optical measurement device with atmospheric control (TOM-AC). Its accuracy of better than 0.5 microns resolution reached during contact-less measurements and its robust contour-detection algorithm allow a data quality making a numerical derivative of the shrinkage possible. Hence, we present here shrinkage and shrinkage rates for spheres of carbonyl iron, metallic foams and a grid produced by screen printing of stainless steel powder. The TOM-AC allows not only measuring samples of arbitrary shapes but also changing the sintering atmospheres (vacuum, inert gas or reducing gases like hydrogen mixtures) during the heat treatment at chosen temperatures. The whole control during the heat treatment is realised via a specific code on a standard PC
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Thermo-optical-measurement devices for powder metallurgical applications
No full textOur thermo-optical measurement device with atmospheric control (TOM-AC) allows to follow changes in the shapes of samples (up to 40mm in diameter) with an accuracy of about 0.5 micron by contact-less measurements. Samples of arbitrary shape can be monitored by TOM-AC during the heat treatment at chosen temperatures and atmospheres. Its contour - and thus dimensional changes - are detected by a sophisticated algorithm. Applications range from determining the shrinkage or shape distortion of powder metallurgical products to measuring the wetting angle of melts. Atmospheric control, i.e. controlling and changing the gas atmosphere (e.g. inert gas / reducing gas at different pressures or vacuum) is realized during the heat treatment via a specific code on standard PCs. We will present examples for different application: shrinkage curves for free and load sintering for powder metallurgical products of different shapes and experiments following the de-binding and melting process
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
