1,720,973 research outputs found
Velocity anisotropy and attenuation in shale in under and over pressured conditions
No full textUltrasonic compressional- and shear-wave attenuation measurements have been made on 40, centimetre-sized samples of water- and oil-saturated oolitic limestones at 50 MPa effective hydrostatic pressure (confining pressure minus pore-fluid pressure) at frequencies of about 0.85 MHz and 0.7 MHz respectively, using the pulse-echo method. The mineralogy, porosity, permeability and the distribution of the pore types of each sample were determined using a combination of optical and scanning electron microscopy, a helium porosimeter and a nitrogen permeameter. The limestones contain a complex porosity system consisting of interparticle macropores (dimensions up to 300 microns) and micropores (dimensions 5–10 microns) within the ooids, the calcite cement and the mud matrix. Ultrasonic attenuation reaches a maximum value in those limestones in which the dual porosity system is most fully developed, indicating that the squirt-flow mechanism, which has previously been shown to occur in shaley sandstones, also operates in the limestones. It is argued that the larger-scale dual porosity systems present in limestones in situ could similarly cause seismic attenuation at the frequencies of field seismic surveys through the operation of the squirt-flow mechanism
Recommended from our members
Velocities of compressional and shear waves in limestones
No full textCarbonate rocks are important hydrocarbon reservoir rocks with complex textures and petrophysical properties (porosity and permeability) mainly resulting from various diagenetic processes (compaction, dissolution, precipitation, cementation, etc.). These complexities make prediction of reservoir characteristics (e.g. porosity and permeability) from their seismic properties very difficult. To explore the relationship between the seismic, petrophysical and geological properties, ultrasonic compressional- and shear-wave velocity measurements were made under a simulated in situ condition of pressure (50 MPa hydrostatic effective pressure) at frequencies of approximately 0.85 MHz and 0.7 MHz, respectively, using a pulse-echo method. The measurements were made both in vacuum-dry and fully saturated conditions in oolitic limestones of the Great Oolite Formation of southern England. Some of the rocks were fully saturated with oil. The acoustic measurements were supplemented by porosity and permeability measurements, petrological and pore geometry studies of resin-impregnated polished thin sections, X-ray diffraction analyses and scanning electron microscope studies to investigate submicroscopic textures and micropores. It is shown that the compressional- and shear-wave velocities (V-p and V-s, respectively) decrease with increasing porosity and that V-p decreases approximately twice as fast as V-s. The systematic differences in pore structures (e.g. the aspect ratio) of the limestones produce large residuals in the velocity versus porosity relationship. It is demonstrated that the velocity versus porosity relationship can be improved by removing the pore-structure-dependent variations from the residuals. The introduction of water into the pore space decreases the shear moduli of the rocks by about 2 GPa, suggesting that there exists a fluid/matrix interaction at grain contacts, which reduces the rigidity. The predicted Biot-Gassmann velocity values are greater than the measured velocity values due to the rock-fluid interaction. This is not accounted for in the Biot-Gassmann velocity models and velocity dispersion due to a local flow mechanism. The velocities predicted by the Raymer and time-average relationships overestimated the measured velocities even more than the Biot model
A laboratory study of seismic velocity and attenuation anisotropy in near-surface sedimentary rocks
No full textThe laboratory ultrasonic pulse-echo method was used to collect accurate P- and S-wave velocity (±0.3%) and attenuation (±10%) data at differential pressures of 5–50 MPa on water-saturated core samples of sandstone, limestone and siltstone that were cut parallel and perpendicular to the vertical borehole axis. The results, when expressed in terms of the P- and S-wave velocity and attenuation anisotropy parameters for weakly transversely isotropic media (?, ? , ?Q, ? Q) show complex variations with pressure and lithology. In general, attenuation anisotropy is stronger and more sensitive to pressure changes than velocity anisotropy, regardless of lithology. Anisotropy is greatest (over 20% for velocity, over 70% for attenuation) in rocks with visible clay/organic matter laminations in hand specimens. Pressure sensitivities are attributed to the opening of microcracks with decreasing pressure. Changes in magnitude of velocity and attenuation anisotropy with effective pressure show similar trends, although they can show different signs (positive or negative values of ?, ?Q, ? , ? Q). We conclude that attenuation anisotropy in particular could prove useful to seismic monitoring of reservoir pressure changes if frequency-dependent effects can be quantified and modelled
Recommended from our members
Variation in dynamic elastic shear modulus of sandstone upon fluid saturation and substitution
No full textExperimental acoustic measurements on sandstone rocks at both sonic and ultrasonic frequencies show that fluid saturation can cause a noticeable change in both the dynamic bulk and shear elastic moduli of sandstones. We observed that the change in dynamic shear modulus upon fluid saturation is highly dependent on the type of saturant, its viscosity, rock microstructure, and applied pressures. Frequency dispersion has some influence on dynamic elastic moduli too, but its effect is limited to the ultrasonic frequency ranges and above. We propose that viscous coupling, reduction in free surface energy, and, to a limited extent, frequency dispersion due to both local and global flow are the main mechanisms responsible for the change in dynamic shear elastic modulus upon fluid saturation and substitution, and we quantify influences
Laboratory estimates of normal and shear fracture compliance
No full textLaboratory estimates of the normal (Bn) and shear (Bt) compliance of artificial fractures
in samples of Jurassic and Carboniferous limestone under wet and dry conditions
are presented. The experiments were performed over a range of confining pressures
(from 5 MPa up to 60 MPa), at ultrasonic frequencies in a Triaxial Hoek cell, using
the pulse-echo reflection technique. The results of this study confirm that the Bn/Bt
ratio of a fracture is dependent on the fluid fill. A value of Bn / Bt of less than 0.05 was
obtained for our wet (honey saturated) sample which is consistent with the prediction
that this ratio should be close to zero for fluid saturated fractures. Values of Bn/Bt for
the dry sample are significantly higher and increase with confining pressure from 0.2
to 0.5. It is suggested that a Bn/Bt ratio of 0.5 is probably a more representative value
to use in modelling studies of gas filled fractures than the common assumption that
Bn ? Bt
Upscaling of elastic wave and electrical properties of reservoir rocks (Commercial in Confidence)
No full textJoint seismic and electrical measurements of gas hydrates in continental margin sediments
No full textWater saturation effects on elastic wave attenuation in porous rocks with aligned fractures
No full textElastic wave attenuation anisotropy in porous rocks with aligned fractures is of interest to seismic remote sensing of the Earth's structure and to hydrocarbon reservoir characterization in particular. We investigated the effect of partial water saturation on attenuation in fractured rocks in the laboratory by conducting ultrasonic pulse-echo measurements on synthetic, silica-cemented, sandstones with aligned penny-shaped voids (fracture density of 0.0298 ± 0.0077), chosen to simulate the effect of natural fractures in the Earth according to theoretical models. Our results show, for the first time, contrasting variations in the attenuation (Q−1) of P and S waves with water saturation in samples with and without fractures. The observed Qs/Qp ratios are indicative of saturation state and the presence or absence of fractures, offering an important new possibility for remote fluid detection and characterization
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
- …
