1,720,957 research outputs found
Quadruple-Junction Thin-Film Silicon-Based Solar Cells
No full textThe direct utilization of sunlight is a critical energy source in a sustainable future. One of the options is to convert the solar energy into electricity using thin-film silicon-based solar cells (TFSSCs). Solar cells in a triple-junction configuration have exhibited the highest energy conversion efficiencies within the thin-film silicon photovoltaic technology. Going further from the state-of-the-art device structures, this thesis works on the concept of quadruple-junction TFSSCs, and explores the potential and feasibility of such configuration.The initial experimental realization of quadruple-junction TFSSCs is demonstrated in Chapter 2. The fabricated thin-film a-SiOx:H/a-Si:H/nc-Si:H/nc-Si:H solar cells showed favorable fill factors (FF) and exceptionally high open-circuit voltages (VOC) up to 2.91 V, suggesting a high quality of the material depositions and of the process control. Optical simulations were used in the design of the device structure, to precisely control the thickness and optical absorption in the layers. This preliminary experiment indicated how improvements can be made by better light management.The spectral response of the component subcells is important information for the study of multi-junction solar cells, and the accurate measurement of such properties turns out to be challenging. Chapter 3 analyzes the mechanism of the spectral response measurement of multi-junction solar cells, by means of modeling the optoelectrical response of the subcells and their internal interactions. The formation of measurement artifacts, and their dependence on cell properties and measurement conditions, are elucidated. The analyses lead to comprehensive guidelines on how to conduct a trustworthy measurement and sensible data interpretation.Absorbing semiconductor materials with different bandgaps are desirable for multi-junction solar cells. Thin-film a-SiGex:H cells have been developed to accommodate an absorber material with an intermediate bandgap between that of a-Si:H and nc-Si:H. Chapter 4 reports the development of a-SiGex:H cells using mixed-phase SiOx:H materials in the doped layers. Bearing the band alignment in mind, the optimization of p- and n-type SiOx:H layers resulted in satisfying device performance. The use of SiOx:H p- and n-layers offers great flexibility when integrating the cell in a multi-junction solar cell. Chapter 5 describes the development of quadruple-junction TFSSCs using four different absorber materials. The thin-film wide-gap a-Si:H/narrow-gap a-Si:H/a-SiGex:H/nc-Si:H solar cells promotes reasonable spectral utilization because of the descending bandgap along the direction of light incidence. The tunnel recombination junctions between the subcells have been optimized to ensure effective interconnections thus the proper functioning of the multi-junction device. Advanced light management, which involved the use of modulated surface textured front electrode, was arranged for enhancing the optical performance. These investigations reveal the potential of quadruple-junction TFSSCs.Chapter 6 evaluates the benefit of multi-junction solar cells with different number of subcells. The gains and losses inherent in adding more subcells have been critically assessed from the optical and electrical points of view. The effects of optical reflection, parasitic absorption, tunnel recombination junctions, and filtered illumination in multi-junction cells on the performance were investigated. In general, all types of losses increase with the number of subcells. Among them, the filtered illumination in the subcells can play a significant role in case of a large number of subcells. These results show that such comprehensive analysis helps to judge whether it is reasonable to develop a multi-junction solar cell with a certain structure.Photovoltaic Materials and Device
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
Thin-film amorphous silicon germanium solar cells with p-and n-type hydrogenated silicon oxide layers
No full textMixed-phase hydrogenated silicon oxide (SiOx:H) is applied to thin-film hydrogenated amorphous silicon germanium (a-SiGe:H) solar cells serving as both p-doped and n-doped layers. The bandgap of p-SiOx:H is adjusted to achieve a highly-transparent window layer while also providing a strong electric field. Bandgap grading of n-SiOx:H is designed to obtain a smooth transition of the energy band edge from the intrinsic to n-doped layer, without the need of an amorphous buffer layer. With the optimized optical and electrical structure, a high conversion efficiency of 9.41% has been achieved. Having eliminated other doped materials without sacrificing performance, the sole use of SiOx:H in the doped layers of a-SiGe:H cells opens up great flexibility in the design of high-efficiency multi-junction thin-film silicon-based solar cells
Too Many Junctions?: A Case Study of Multijunction Thin-Film Silicon Solar Cells
No full textThe benefit of two-terminal multijunction solar cells in regard to the numberof junctions (subcells) is critically evaluated. The optical and electrical lossesinherent in the construction of multijunction cells are analyzed using informationfrom thin-film silicon photovoltaics as a representative case. Althoughthe multijunction approach generally reduces the thermalization and nonabsorption losses, several types of losses rise with the number of subcells.Optical reflection and parasitic absorption are slightly increased by addingsupporting layers and interfaces. The output voltages decline because of thetunnel recombination junctions, and more importantly of the illuminationfiltered and reduced by the top subcell(s). The loss mechanisms consumethe potential gains in efficiency of multijunction cells. For thin-film silicon,the triple-junction is confirmed to be the best performing structure. Moregenerally, only when each component subcell shows a high ratio between theoutput voltage and the bandgap of the absorber material, a multijunction cellwith a large number of subcells can be beneficial. Finally, the high voltageand low current density of multijunction cells with a large number of subcellsmake them difficult to optimize and manufacture, vulnerable to any changesin the solar spectrum, and thus less practical for the ordinary terrestrialapplications.Photovoltaic Materials and DevicesElectrical Sustainable Energ
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
