196,046 research outputs found
Evolution and Modern Approaches for Thermal Analysis of Electrical Machines
No full textIn this paper, the authors present an extended survey on the evolution and the modern approaches in the thermal analysis of electrical machines. The improvements and the new techniques proposed in the last decade are analyzed in depth and compared in order to highlight the qualities and defects of each. In particular, thermal analysis based on lumped-parameter thermal network, finite-element analysis, and computational fluid dynamics are considered in this paper. In addition, an overview of the problems linked to the thermal parameter determination and computation is proposed and discussed. Taking into account the aims of this paper, a detailed list of books and papers is reported in the references to help researchers interested in these topics
Early child neglect: Does it predict obesity or underweight in later childhood?
No full textChild neglect has been hypothesized to be a risk factor for both obesity and underweight in early childhood, although little research has examined the relation between neglect and body mass index (BMI). The present study examined the relation between neglect and BMI among 185 children (91 with a Child Protective Services history of neglect) who were initially seen at ages 4 to 6 years and who were followed through ages 7 to 9 years. Neglected and comparison children were found to have similar BMIs, although both groups had BMIs that were significantly greater than CDC norms for age, gender, and ethnicity. Neglect chronicity did predict lower BMIs but only at age 8 and 9 years. The present findings suggest that greater examination of moderators is needed to identify the specific contexts in which neglect is related to children’s weight.This is the authors' accepted manuscript for an article that was published in Child Maltreatment (2010), vol. 15, no. 3, pp. 250-254. doi: 10.1177/1077559510363730Peer reviewe
Dr. Duane M. Jackson, Morehouse College, July 2011
No full textThis video is a conversation with Dr. Duane M. Jackson. Dr. Jackson talks about his paper, "Recall and the Serial Position Effect: The Role of Primacy and Recency on Accounting Students' Performance." Jackie Daniel, AUC Woodruff Library, is the interviewer
"Reflections on the subject of Emigration from Europe with a view to Settlement in the United States" By M. Carey.
No full text"Reflections on the subject of Emigration from Europe with a view to Settlement in the United States: containing bried sketches of the moral and political character of those states.
By M. Carey, member of the American philosophical, and of the American Antiquarian Society, and author of The Olive Branch, Cindiciae Hibernicae, essays on banking, on political economy, and on internal improvement.
To which are now added the English editor's comments on the subject; together with Important Advice to Emigrants, and Cautions Against Impositions Practiced in the Outports
Dispelling the Myths Behind First-author Citation Counts
No full textWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
Dr. Glendon Swarthout
No full textHosted by Roger M. Busfield, MSU Assistant Professor of Speech and Theater, Meet the Author is designed to introduce a general audience to a contemporary author and their work through in-depth interviews. This episode features a conversation between Dr. Glendon Swarthout, prolific author and English professor at MSU, and assistant professors Sam S. Baskett and Theodore B. Strandness
Attention Deficit Hyperactivity Disorder (ADHD) and Ethnicity: A Literature Review
No full textAttention Deficit Hyperactivity Disorder (ADHD) is one of the most expensive mental disorders, costing U.S. citizens $77 billion every year (Reinberg, 2004). Although ADHD effects between 3-7% of U.S. children (American Psychiatric Association [APA], 2000), there are many misconceptions about the disorder and concerns have been raised regarding appropriate diagnosis and treatment in children, adolescents, and adults. In addition to these concerns, several authors have noted that there is a lack of research regarding ethnicity and ADHD. The limited research that has been done is confusing with some studies indicating that there is no difference in rates of ADHD diagnoses (Nigg, 2001) and other studies indicating that African American children are placed in behaviorally disordered classrooms at higher rates (Maddox & Wilson, 2004). Reid, Casat, Norton, Anastopoulus, and Temple (2001) found that teachers were more likely to exhibit a bias in their rating scales if their students were African American. The purpose of this paper is to review the literature on ADHD, with a particular focus on the research of ethnicity and ADHD
Simulation of thermal plant optimization and hydraulic aspects of thermal distribution loops for large campuses
No full textFollowing an introduction, the author describes Texas A&M University and its utilities system. After that, the author presents how to construct simulation models for chilled water and heating hot water distribution systems. The simulation model was used in a $2.3 million Ross Street chilled water pipe replacement project at Texas A&M University. A second project conducted at the University of Texas at San Antonio was used as an example to demonstrate how to identify and design an optimal distribution system by using a simulation model. The author found that the minor losses of these closed loop thermal distribution systems are significantly higher than potable water distribution systems. In the second part of the report, the author presents the latest development of software called the Plant Optimization Program, which can simulate cogeneration plant operation, estimate its operation cost and provide optimized operation suggestions. The author also developed detailed simulation models for a gas turbine and heat recovery steam generator and identified significant potential savings. Finally, the author also used a steam turbine as an example to present a multi-regression method on constructing simulation models by using basic statistics and optimization algorithms. This report presents a survey of the author??s working experience at the Energy Systems Laboratory (ESL) at Texas A&M University during the period of January 2002 through March 2004. The purpose of the above work was to allow the author to become familiar with the practice of engineering. The result is that the author knows how to complete a project from start to finish and understands how both technical and nontechnical aspects of a project need to be considered in order to ensure a quality deliverable and bring a project to successful completion. This report concludes that the objectives of the internship were successfully accomplished and that the requirements for the degree of Degree of Engineering have been satisfied
Advanced rotorcraft aeromechanics studies in the French-German SHANEL project
No full textThe present paper gives an overview of the SHANEL research project (partly supported by the French DGAC and the German BMWA) which was started at the end of 2006 between the German and French
Aerospace Research Centres DLR and ONERA, the University of Stuttgart and the two national helicopter manufacturers, Eurocopter and Eurocopter Germany. This program represents the continuation of the binational CHANCE project, involving the same partners. The objective of the project is to enhance and further validate the CFD tools: the structured multi-block elsA software of Onera and the unstructured TAU
code of DLR, for computing the aerodynamics of the complete trimmed helicopter, accounting for the blade elasticity by coupling with blade dynamics and structural mechanics tools. A coupling activity between the FLOWer code of DLR and the HOST tool of Eurocopter is also completed to achieve the free flight trim of a complete helicopter. In this program particular attention is being given to wake conservation, to the modelling of elaborated complex shapes such as rotor hubs and consequently to interactional phenomena, with the global objective of improving the prediction of helicopter performance and noise. Rotorcraft noise prediction chains were rationalized, enhanced and compared. The validation activity of the flow solvers elsA and TAU is progressing from the CHANCE results and is now focussing on more complex problems such as the simulation of a rotating rotor head mounted on its fuselage, of a complete helicopter in steady mode through the use of actuator discs and engine boundary conditions, the time-accurate simulation of a complete trimmed helicopter in forward-flight, and the numerical simulation of Blade Vortex Interactions. All along the research program the updated versions of the CFD and acoustic codes are systematically delivered to industry. This approach, also followed during the former CHANCE project, is chosen to speed up the transfer of capabilities to industry and check early enough
that the products meet the expectations for applicability in the industrial environment of Eurocopter
Intern experience at CH���M Hill, Inc.: an internship report
No full textIncludes author's vita"Submitted to the College of Engineering of Texas A&M University in partial
fulfillment of the requirement for the degree of Doctor of Engineering."Includes bibliographical referencesA review of the author's internship experience with CH���M HILL, Inc.
during the period September 1975 through May 1976 is presented. During this nine month
internship the author worked as an Engineer II in the Industrial Processes discipline of this
large consulting engineering firm... The author's prime responsibility was as one of three
lead design engineers on the design of a large wastewater treatment facility for a pulp mill
in Hoquiam, Washington owned by ITT Rayonier Inc. The work generally consisted of the design
of individual treatment units and associated piping and pumping. The purpose of the project
was to provide wastewater treatment capabilities that would satisfy the effluent limitations
(standards) imposed upon the mill by the State of Washington Department of Ecology and the
U.S. Environmental Protection Agency. The author's assignment also entailed necessary
interaction with the project manager and other CH���M HILL design engineers and support staff
members, the client's representatives, and representatives of two other consulting engineering
firms working on the project. Thus, the internship position at CH���M HILL provided considerable
experience coordinating the author's work with the work of other engineers, guiding the design
and administrative efforts of a support staff, and interacting regularly with the client and
other consulting firms. This broad exposure to a variety of engineering and organizational
problems provided a valuable educational experience
- …
