1,720,963 research outputs found
Forms of energy. Architectural guidelines for the design of residential buildings being able to interact with the Smart Grid
Come progettare l’edificio e la città in chiave energetica? Quali tipologie rispondono alla necessità di una maggiore flessibilità energetica nei confronti della rete? Esistono modalità insediative che più facilmente si integrano alla cosiddetta rete intelligente rispetto ad altre?
Convinzione alla base di questo lavoro di ricerca è che proprio questo cambiamento sia in grado di generare novità tecniche e concettuali così forti da costituire un momento di profondo sconvolgimento nel Progetto di Architettura, sia per quanto riguarda il progetto del nuovo che l’azione di rigenerazione del patrimonio edilizio esistente. Scopo di questo lavoro è dunque quello di individuare linee guida per la progettazione architettonica di edifici e brani di città che, attraverso il loro carattere formale e distributivo, siano in grado di favorire la gestione dei flussi energetici e ancor più di diventare attori attivi all’interno della nuova rete energetica
Technical effectiveness of cement-based mortar for high-reflective building envelope through building energy simulations: preliminary results
In areas with high levels of solar radiation, decreasing the amount of solar energy absorbed by the building envelope is useful to reduce the need of air conditioning and "heat island" effects. Most high-reflective products, however, suffer from low durability. The COOL-IT project is developing an innovative high-reflective cement based mortar for precast products to be used as outer layer in buildings for both vertical and horizontal surfaces, or for road pavement. The mix design is aimed at increasing the durability of this cement-based component while retaining high reflectance to solar radiation. This paper presents the preliminary results of the project, based on the simulation of the energy demand of a residential building, intended as a support to optimize the proposed mixes. The model is analysed in three different locations in Italy, for one year of operation. This allows evaluating the trade-off of the energy demand between the winter increase and the summer reduction
Messa in sicurezza post-sisma della parrocchia della Visitazione di Maria Santissima a Reno Finalese (MO)
A seguito degli eventi sismici del 20 e 29 Maggio 2012, che hanno coinvolto una vasta parte del territorio dell'Emilia (la parte occidentale della Regione Emilia-Romagna), l'ENEA è stata coinvolta nelle operazioni di verifica di agibilità e di interventi per la messa in sicurezza post-sisma sulle varie tipologie costruttive esistenti sul territorio. Questo documento si focalizza sugli edifici di interesse artistico e culturale. Dopo l'evento sismico, molte Chiese e palazzi storici hanno subito danni significativi. Alcuni di questi hanno subito danni devastanti e permanenti, altri possono essere ripristinati grazie ad immediati interventi per la messa in sicurezza seguiti da interventi specifici. Gli interventi di messa in sicurezza rivestono un ruolo importante poiché preservano la costruzione storica da un peggioramento del danno. L'esempio presentato di seguito, riguarda la Chiesa della Visitazione di Maria Santissima a
Reno Finalese (Modena). ENEA ha proposto un intervento di messa in sicurezza sicurezza, che è stato approvato dalla Direzione Regionale per i Beni Culturali e Paesaggistici dell'Emilia-Romagna.Following the earthquakes of May 20th and 29th,2012, which involved an extensive part of Emilia territory (the Western part of Emilia–Romagna), ENEA has been involved in the operations of usability testing and post-earthquake safety interventions on the various construction typologies existing on the territory. This paper is focused on cultural and artistic interest constructions, only. After the seismic event, many churches and historic buildings have suffered significant damage. Some of these have undergone devastating and permanent damage. Others can be restored if immediate safety interventions will be realized before carring out the appropriate retrofitting interventions, in order to preserve the historical construction from worsening the damage. The example presented below, concerns the
Visitazione di Maria Santissima Church in Reno Finalese (Modena). ENEA proposed a safety intervention, which has been approved by the Regional Directorate for Cultural Heritage and Landscape in Emilia-Romagna
Analisi energetico – ambientale di un tetto verde estensivo a Bologna
Il presente rapporto tecnico scaturisce da un lavoro di Tesi in Architettura tecnica nel corso di Laurea in Ingegneria Edile – Architettura dell’Alma Mater Studiorum, Università di Bologna (Dipartimento di Architettura, Dipartimento di Ingegneria Civile, Chimica, Ambientale e dei Materiali ), svolto con la collaborazione del Laboratorio LCA ed Ecodesign e del Laboratorio LAERTE della Rete Alta Tecnologia.. Scopo dello studio è quello di illustrare le proprietà dei sistemi di copertura a verde più comuni realizzati in Italia e in Europa e di valutare e confrontare, attraverso la metodologia del Life Cycle Assessment – LCA (Analisi del ciclo di vita), le prestazioni energetico-ambientali di un edificio con copertura a verde estensivo ed uno con copertura “grigia” tradizionale, entrambi dell’Università di Bologna
Diagnosi energetica della Scuola Media del Comune di Castrocaro Terme e Terra Del Sole (FC)
Oggetto del presente Report è la diagnosi energetica del Comprensorio scolastico di Castrocaro Terme. Il contesto in cui si svolge tale attività è strettamente legato alla sostenibilità del territorio emiliano-romagnolo. La diagnosi energetica oggetto del presente report fa parte di un progetto molto più ampio coordinato da ERVET (società in house della Regione Emilia-Romagna che opera come agenzia di sviluppo territoriale a supporto delle politiche regionali). Il progetto, denominato Alterenergy, è stato cofinanziato dal programma IPA Adriatico, mira a definire una strategia comune territoriale in campo energetico, che possa affrontare la sfida dei cambiamenti climatici ricercando un equilibrio tra gli obiettivi della protezione ambientale, della competitività e della sicurezza dell'approvvigionamento
nell’area Adriatica. Grazie al progetto è stata possibile l’applicazione e sperimentazione di modelli sostenibili di gestione e di utilizzo delle risorse energetiche in alcuni Comuni e che si sono resi disponibili come casi pilota. Il Comune di Castrocaro Terme ha messo a disposizione il proprio Polo scolastico ai fini di una diagnosi energetica che ne definisse le eventuali carenze energetiche ed individuasse i possibili interventi di miglioramento energetico. Il presente report tratta la prima parte del lavoro svolto: la diagnosi energetica dello stato di fatto.Object of the present Report is a school district energy audit in Castrocaro Terme. The context in which it is developed the activity is tightly tied to the sustainability of the Emiliano-Romagnolo territory. The energy audit of the present report is part of a much larger project coordinated by ERVET (in house society of the Emilia-Romagna Region that operates as agency of territorial development to support the regional politics). The project, known as Alterenergy, has been cofinancied by IPA Adriatic program, and it aims to define a common territorial strategy in energetic field, that can tackle the challenge of the climatic changes seeking an equilibrium among the objectives of the environmental protection, competitiveness and safety of the provisioning in the Adriatic area. Thanks to the project it has been possible the application and experimentation of sustainable models of management and the use of
the energy resources in some Municipality used as study cases. The Municipality of Castrocaro terme has made available its school district for an energy audit to define energy lacks and to identify possible energy improvements. The present report treats the first part of the developed job: the energy audit of the school district
Building Sustainable Industrial Areas: Experience and Perspectives from the Mediterranean and Western Balkan Countries
An EU research project (Mediterranean Eco-Industrial Development, (MEID)) which
involves different actors from Mediterranean and Western Balkans region, is currently in
progress. Its general objective is to provide innovative management figures and a decision
support tool (model) to plan, build and manage more competitive Sustainable Industrial
Areas (SIA) in the involved region.
In order to correspond to a coherent solution, an accurate research has been performed.
The methodology implemented to detect the main issues under survey has been a SWOT
analysis of several target IAs.
Following its results, there have been defined the most relevant aspects aiming at
sustainability of IAs in the area. The model introduces or encourages the continuous
improvement of environmental performances of the Mediterranean industrial areas in the
following fields: integrating production and dismissal of solid wastes, energy saving and
use of renewable energies, reducing water consumption, better viability and avoid the
deposit of dangerous material. Thanks to this “green approach”, SMEs will be the final
beneficiaries, fostered to eco-innovation, competitiveness and transnational cooperation.
This paper presents the general context and results of the MEID project
A Simplified Indirect Technique for the Measurement of Mechanical Power in Three-Phase Asynchronous Motors
This paper presents an indirect method for measuring the mechanical power produced by three-phase induction motors. The proposed technique is based on the hypothesis that three-phase induction motors are balanced systems that transform electrical power into mechanical one. The measurement of a single phase current is used to estimate the mechanical power generated at the axis. The relationship between electric current and mechanical power is generally non-linear. By expressing the quantities in p.u., this trend is approximated with a second order polynomial. From the analysis of the mechanical power characteristics related to 13 motors we obtained the parameters of the interpolating parabolic curves of motors from 1.1kW to 75kW rated power. The proposed technique can be easily adopted in order to monitor the mechanical power of three phase induction motors using only one phase current transducer. Starting from the motor nameplate no experimental measurement or other data are necessary to estimate the mechanical power. This technique can be widely used in low cost multipoint measurement system able to monitor the mechanical power where no other transducer or voltage divider are necessary
Diagnosi energetica della Scuola Media del Comune di Brisighella (RA)
Oggetto del presente Report è la diagnosi energetica della Scuola Media del Comune di Brisighella. Il contesto in cui si svolge tale attività è strettamente legato alla sostenibilità del territorio emilianoromagnolo. La diagnosi energetica oggetto del presente report fa parte di un progetto molto più ampio coordinato da ERVET (società in house della Regione Emilia-Romagna che opera come agenzia di sviluppo territoriale a supporto delle politiche regionali). Il progetto, denominato Alterenergy, è stato cofinanziato dal programma IPA Adriatico, mira a definire una strategia comune territoriale in campo energetico, che possa affrontare la sfida dei cambiamenti climatici ricercando un equilibrio tra gli obiettivi della protezione ambientale, della competitività e della sicurezza dell'approvvigionamento nell’area Adriatica. Grazie al progetto è stata possibile l’applicazione e sperimentazione di modelli sostenibili di gestione e di utilizzo delle risorse energetiche in alcuni Comuni e che si sono resi disponibili come casi pilota. Il Comune di Brisighella ha messo a disposizione la propria struttura scolastica ai fini di una diagnosi energetica che ne definisse le eventuali carenze energetiche ed individuasse i possibili interventi di miglioramento energetico. Il presente report tratta la prima parte del lavoro svolto: la diagnosi energetica dello stato di fatto.Object of the present Report is a school energy audit in Brisighella. The context in which it is developed the activity is tightly tied to the sustainability of the Emiliano-Romagnolo territory. The energy audit of the present report is part of a much larger project coordinated by ERVET (in house society of the Emilia-Romagna Region that operates as agency of territorial development to support the regional politics). The project, known as Alterenergy, has been cofinancied by IPA Adriatic program, and it aims to define a common territorial strategy in energetic field, that can tackle the challenge of the climatic changes seeking equilibrium among the objectives of the environmental protection, competitiveness and safety of the provisioning in the Adriatic area. Thanks to the project it has been possible the application
and experimentation of sustainable models of management and the use of the energy resources in some Municipality used as study cases. The Municipality of Brisighella has made available its school complex for an energy audit to define energy lacks and to identify possible energy improvements. The present report treats the first part of the developed job: the energy audit of the school
Going Beyond Counting First Authors in Author Co-citation Analysis
The present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
- …
