1,720,964 research outputs found
Correlations between osteocyte lacuno canalicular network and material characteristics in bone adaptation and regeneration
Going Beyond Counting First Authors in Author Co-citation Analysis
The present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
We provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
We conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
Korrelationen zwischen dem lakuno-kanalikulären Netzwerk der Osteozyten und Materialeigenschaften bei der Knochenanpassung und -regeneration
The complex hierarchical structure of bone undergoes a lifelong remodeling process, where it adapts to mechanical needs. Hereby, bone resorption by osteoclasts and bone formation by osteoblasts have to be balanced to sustain a healthy and stable organ. Osteocytes orchestrate this interplay by sensing mechanical strains and translating them into biochemical signals. The osteocytes are located in lacunae and are connected to one another and other bone cells via cell processes through small channels, the canaliculi. Lacunae and canaliculi form a network (LCN) of extracellular spaces that is able to transport ions and enables cell-to-cell communication. Osteocytes might also contribute to mineral homeostasis by direct interactions with the surrounding matrix. If the LCN is acting as a transport system, this should be reflected in the mineralization pattern. The central hypothesis of this thesis is that osteocytes are actively changing their material environment. Characterization methods of material science are used to achieve the aim of detecting traces of this interaction between osteocytes and the extracellular matrix. First, healthy murine bones were characterized. The properties analyzed were then compared with three murine model systems: 1) a loading model, where a bone of the mouse was loaded during its life time; 2) a healing model, where a bone of the mouse was cut to induce a healing response; and 3) a disease model, where the Fbn1 gene is dysfunctional causing defects in the formation of the extracellular tissue.
The measurement strategy included routines that make it possible to analyze the organization of the LCN and the material components (i.e., the organic collagen matrix and the mineral particles) in the same bone volumes and compare the spatial distribution of different data sets. The three-dimensional network architecture of the LCN is visualized by confocal laser scanning microscopy (CLSM) after rhodamine staining and is then subsequently quantified. The calcium content is determined via quantitative backscattered electron imaging (qBEI), while small- and wide-angle X-ray scattering (SAXS and WAXS) are employed to determine the thickness and length of local mineral particles.
First, tibiae cortices of healthy mice were characterized to investigate how changes in LCN architecture can be attributed to interactions of osteocytes with the surrounding bone matrix. The tibial mid-shaft cross-sections showed two main regions, consisting of a band with unordered LCN surrounded by a region with ordered LCN. The unordered region is a remnant of early bone formation and exhibited short and thin mineral particles. The surrounding, more aligned bone showed ordered and dense LCN as well as thicker and longer mineral particles. The calcium content was unchanged between the two regions.
In the mouse loading model, the left tibia underwent two weeks of mechanical stimulation, which results in increased bone formation and decreased resorption in skeletally mature mice. Here the specific research question addressed was how do bone material characteristics change at (re)modeling sites? The new bone formed in response to mechanical stimulation showed similar properties in terms of the mineral particles, like the ordered calcium region but lower calcium content compared to the right, non-loaded control bone of the same mice. There was a clear, recognizable border between mature and newly formed bone. Nevertheless, some canaliculi went through this border connecting the LCN of mature and newly formed bone.
Additionally, the question should be answered whether the LCN topology and the bone matrix material properties adapt to loading. Although, mechanically stimulated bones did not show differences in calcium content compared to controls, different correlations were found between the local LCN density and the local Ca content depending on whether the bone was loaded or not. These results suggest that the LCN may serve as a mineral reservoir.
For the healing model, the femurs of mice underwent an osteotomy, stabilized with an external fixator and were allowed to heal for 21 days. Thus, the spatial variations in the LCN topology with mineral properties within different tissue types and their interfaces, namely calcified cartilage, bony callus and cortex, could be simultaneously visualized and compared in this model. All tissue types showed structural differences across multiple length scales. Calcium content increased and became more homogeneous from calcified cartilage to bony callus to lamellar cortical bone. The degree of LCN organization increased as well, while the lacunae became smaller, as did the lacunar density between these different tissue types that make up the callus. In the calcified cartilage, the mineral particles were short and thin. The newly formed callus exhibited thicker mineral particles, which still had a low degree of orientation. While most of the callus had a woven-like structure, it also served as a scaffold for more lamellar tissue at the edges. The lamelar bone callus showed thinner mineral particles, but a higher degree of alignment in both, mineral particles and the LCN. The cortex showed the highest values for mineral length, thickness and degree of orientation. At the same time, the lacunae number density was 34% lower and the lacunar volume 40% smaller compared to bony callus. The transition zone between cortical and callus regions showed a continuous convergence of bone mineral properties and lacunae shape. Although only a few canaliculi connected callus and the cortical region, this indicates that communication between osteocytes of both tissues should be possible. The presented correlations between LCN architecture and mineral properties across tissue types may suggest that osteocytes have an active role in mineralization processes of healing.
A mouse model for the disease marfan syndrome, which includes a genetic defect in the fibrillin-1 gene, was investigated. In humans, Marfan syndrome is characterized by a range of clinical symptoms such as long bone overgrowth, loose joints, reduced bone mineral density, compromised bone microarchitecture, and increased fracture rates. Thus, fibrillin-1 seems to play a role in the skeletal homeostasis. Therefore, the present work studied how marfan syndrome alters LCN architecture and the surrounding bone matrix. The mice with marfan syndrome showed longer tibiae than their healthy littermates from an age of seven weeks onwards. In contrast, the cortical development appeared retarded, which was observed across all measured characteristics, i. e. lower endocortical bone formation, looser and less organized lacuno-canalicular network, less collagen orientation, thinner and shorter mineral particles.
In each of the three model systems, this study found that changes in the LCN architecture spatially correlated with bone matrix material parameters. While not knowing the exact mechanism, these results provide indications that osteocytes can actively manipulate a mineral reservoir located around the canaliculi to make a quickly accessible contribution to mineral homeostasis. However, this interaction is most likely not one-sided, but could be understood as an interplay between osteocytes and extra-cellular matrix, since the bone matrix contains biochemical signaling molecules (e.g. non-collagenous proteins) that can change osteocyte behavior. Bone (re)modeling can therefore not only be understood as a method for removing defects or adapting to external mechanical stimuli, but also for increasing the efficiency of possible osteocyte-mineral interactions during bone homeostasis. With these findings, it seems reasonable to consider osteocytes as a target for drug development related to bone diseases that cause changes in bone composition and mechanical properties. It will most likely require the combined effort of materials scientists, cell biologists, and molecular biologists to gain a deeper understanding of how bone cells respond to their material environment.Knochen haben eine komplexe hierarchische Struktur, die einen lebenslangen Umbauprozess durchläuft, bei dem der Knochen sich seinen mechanischen Anforderungen anpasst. Um ein gesundes und stabiles Organ zu erhalten müssen Knochenresorption (durch Osteoklasten) und Knochenbildung (durch Osteoblasten) ausgewogen sein. Osteozyten lenken dieses Wechselspiel, indem sie mechanische Belastungen wahrnehmen und sie in biochemische Signale übersetzen. Die Osteozyten sitzen in Lakunen und sind durch Kanälchen untereinander und mit anderen Knochenzellen über ein Netzwerk (LCN) verbunden, das in der Lage ist, Ionen zu transportieren und eine Kommunikation von Zelle zu Zelle zu ermöglichen. Außerdem vermutet man, dass Osteozyten auch durch direkte Wechselwirkungen mit der umgebenden Matrix zur Mineralhomöostase beitragen könnten. Im Mittelpunkt dieser Arbeit steht die Frage, ob Osteozyten ihre materielle Umgebung aktiv verändern können. Um Spuren dieser Wechselwirkung zwischen Osteozyten und der extrazellulären Matrix nachzuweisen, werden materialwissenschaftliche Charakterisierungsmethoden eingesetzt. Zunächst wurden gesunde Mäuseknochen charakterisiert. Die erworbenen Ergebnisse wurden dann mit drei murinen Modellsystemen verglichen: 1) einem Belastungsmodell; 2) ein Heilungsmodell und 3) ein Krankheitsmodell, bei dem das Fbn1-Gen dysfunktional ist und Defekte in der Bildung des extrazellulären Gewebes verursacht werden.
Die Messstrategie umfasste Routinen, die es ermöglichen, die Organisation des LCN und der Materialkomponenten (d.h. die organische Kollagenmatrix und die mineralischen Partikel) in denselben Knochenvolumina zu analysieren und die räumliche Verteilung der verschiedenen Datensätze zu vergleichen. Die dreidimensionale Netzwerkarchitektur des LCN wird durch konfokale Laser-Scanning-Mikroskopie nach Rhodamin-Färbung gemessen und anschließend quantifiziert. Der Kalziumgehalt wird mittels quantitativer Rückstreuelektronenbildgebung bestimmt, während Klein- und Weitwinkel-Röntgenstreuung verwendet werden, um die Dicke und Länge der Mineralpartikel zu bestimmen.
Zunächst wurden Querschnitte der Unterschenkel von gesunden Mäusen charakterisiert, um zu untersuchen, ob Veränderungen in der LCN-Architektur auf Wechselwirkungen von Osteozyten mit der umgebenden Knochenmatrix zurückgeführt werden können. Die Kortizes zeigten zwei Hauptregionen, ein Band mit ungeordneter LCN-Architektur, umgeben von einer Region mit geordneter LCN. Die ungeordnete Region ist ein Überbleibsel der frühen Knochenbildung und wies kurze und dünne Mineralpartikel auf. Der umgebende, stärker ausgerichtete Knochen zeigte ein geordnetes und dichtes LCN, sowie dickere und längere Mineralpartikel. Der Kalziumgehalt blieb bei beiden Regionen unverändert.
Im Mausbelastungsmodell wurde das linke Schienbein zwei Wochen lang mechanisch stimuliert, was zu einer erhöhten Knochenbildung führt. Hier sollte die Forschungsfrage beantwortet werden, wie sich Knochenmaterialeigenschaften an (Re-)Modellierungsstellen aufgrund von Belastung ändern. Der, als Reaktion auf die mechanische Stimulation, gebildete neue Knochen zeigte ähnliche Eigenschaften in Bezug auf die Mineralpartikel, wie die geordnete Kortexregion. Es gab eine klar erkennbare Grenze zwischen reifem und neu gebildetem Knochen. Trotzdem gingen einige Kanälchen durch diese Grenze, die die LCN aus reifem und neu gebildetem Knochen verband.
Für das Heilungsmodell wurden die Oberschenkel von Mäusen einer Osteotomie unterzogen (einer Operation, bei der durch einen Schnitt in der Diaphyse ein Bruch erzeugt wird). Danach konnte die Fraktur 21 Tage heilen. Dadurch konnten in diesem Modell gleichzeitig verkalkter Knorpel, knöcherner Kallus und Kortex untersucht werden. Dafür wurde die räumliche Verteilung der LCN-Topologie sowie die Mineraleigenschaften der verschiedenen Gewebetypen und ihrer Grenzflächen visualisiert und verglichen. Alle Gewebetypen zeigten strukturelle Unterschiede über mehrere Längenskalen hinweg. Der Kalziumgehalt nahm von kalzifiziertem Knorpel zu knöchernem Kallus zu lamellarem kortikalem Knochen zu und wurde homogener. Der Grad der LCN-Organisation nahm ebenfalls zu, während die Lakunen vom Kallus zum Kortexgewebe kleiner wurden, ebenso wie die Lakunendichte. Im verkalkten Knorpel waren die Mineralpartikel kurz und dünn. Der größte Teil des Kallus wies eine Geflechtsknochenstruktur auf und diente als Gerüst für lamellares Gewebe, das dünnere Mineralpartikel, aber einen höheren Grad an Ausrichtung sowohl in den Mineralpartikeln als auch im LCN aufwies. Der Kortex zeigte die höchsten Werte für Minerallänge, Dicke und Orientierungsgrad. Obwohl nur wenige Kanälchen den Kallus und kortikale Regionen verbinden, weist dies darauf hin, dass eine Kommunikation zwischen Osteozyten beider Gewebe möglich sein sollte.
Es wurde auch ein Mausmodell für das Marfan-Syndrom untersucht, das einen Gendefekt im Fibrillin-1-Gen beinhaltet. Beim Menschen ist das Marfan-Syndrom durch eine Reihe klinischer Symptome gekennzeichnet, wie z. B. übermäßiges Wachstum der Gliedmaßen, überstreckbare Gelenke, verringerte Knochenmineraldichte, beeinträchtigte Knochenmikroarchitektur und erhöhte Frakturraten. Somit scheint Fibrillin-1 eine Rolle in der Skeletthomöostase zu spielen. Deswegen untersuchte die vorliegende Arbeit, ob und wie das Marfan-Syndrom die LCN-Architektur und die umgebende Knochenmatrix verändert. Die Mäuse mit Marfan-Syndrom zeigten bereits ab einem Alter von sieben Wochen längere Schienbeine als ihre gesunden Wurfgeschwister. Im Gegensatz dazu erschien die kortikale Entwicklung verzögert, was über alle gemessenen Merkmale hinweg beobachtet wurde, d.h. niedrigere endokortikale Knochenbildung, lockereres und weniger organisiertes LCN, geringerer Grad an Kollagenorientierung sowie ein Trend zu dünneren und kürzeren Mineralpartikel.
In jedem der drei Modellsysteme fand diese Studie, dass Änderungen in der LCN-Architektur räumlich mit Parametern des Knochenmatrixmaterials korrelierten. Obwohl der genaue Mechanismus nicht bekannt ist, liefern diese Ergebnisse Hinweise darauf, dass Osteozyten ein Mineralreservoir aktiv manipulieren können. Dieses Reservoir befindet sich um die Kanälchen herum und dieser Prozess würde es ermöglichen, einen schnell zugänglichen Beitrag zur Mineralhomöostase zu leisten. Diese Interaktion ist jedoch höchstwahrscheinlich nicht einseitig, sondern könnte als Wechselspiel zwischen Osteozyten und extrazellulärer Matrix verstanden werden, da die Knochenmatrix biochemische Signalmoleküle enthält, die das Verhalten von Osteozyten verändern können. Knochen(re)modellierung kann daher nicht nur als Methode zur Defektbeseitigung oder Anpassung an äußere mechanische Reize verstanden werden, sondern auch zur Effizienzsteigerung möglicher Osteozyten-Mineral-Interaktionen während der Knochenhomöostase. Angesichts dieser Ergebnisse erscheint es sinnvoll, Osteozyten als Ziel für die Arzneimittelentwicklung im Zusammenhang mit Knochenerkrankungen in Betracht zu ziehen, die Veränderungen der Knochenzusammensetzung und deren mechanischen Eigenschaften verursachen
koamabayili/VECTRON-author-checklist: VECTRON author checklist
We have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
Author-wise bibliometric analysis based on entropy.
Author-wise bibliometric analysis based on entropy.</p
- …
