1,721,022 research outputs found
Onset of sliding of elastomeric multi-contacts interfaces : experimental study using in situ visualization
No full textLa mise en glissement d’une interface de contact est un phénomène dont la dynamique spatiotemporelle est encore mal comprise. Dans cette thèse, nous avons développé et mis en oeuvre un dispositif expérimental original permettant de visualiser in situ les phénomènes locaux en jeu lors de la mise en glissement d’interfaces rugueuses élastomères, avec une bonne résolution temporelle. Nous avons mis en évidence une forte réduction de l’aire de contact réelle au sein d’une interface de contact sous cisaillement, et ce bien avant le début du glissement macroscopique. Cette réduction influence la valeur de la force de frottement statique de l’interface. Nous avons montré que le paramètre qui quantifie l’amplitude de la réduction vérifie une loi d’échelle valable largement, allant des monocontacts millimétriques jusqu’aux jonctions micrométriques impliquées dans les interfaces rugueuses. Nous avons ensuite montré que la contrainte de cisaillement critique de mise en glissement d’une interface n’est pas une constante pour un couple de matériaux en contact. En effet, en changeant systématiquement l’épaisseur d’un revêtement élastique sur l’un des corps en contact, on peut varier cette contrainte d’un facteur trois. Cet effet est interprété semi-quantitativement via un modèle couplant dissipation à l’interface et dans le volume des matériaux. Nous avons enfin montré que la dynamique spatio-temporelle de mise en glissement est influencée par le couple appliqué à l’interface par la force de frottement, lorsque celle-ci n’est pas exercée dans le plan de l’interface. En particulier, via une mesure du champ de déplacement par corrélation d’images, nous avons réalisé la première comparaison quantitative avec un modèle récent décrivant cet effet de couple.The onset of sliding of a contact interface is a phenomenon the space-time dynamics of which are still poorly understood. In this thesis, we have developed and implemented an original experimental device allowing us to visualize in situ the local phenomena involved during the onset of sliding of rough elastomer interfaces, with a good temporal resolution. We have shown a strong reduction of the real contact area within a sheared contact interface, well before the beginning of macroscopic sliding. This reduction affects the value of the static friction force of the interface. We have shown that the parameter that quantifies the amplitude of the reduction obeys a well-defined scaling law ranging from millimetric mono-contacts to the micrometric junctions involved in rough interfaces. We have then shown that the shear strength of an interface is not a constant for a couple of materials in contact. Indeed, by systematically changing the thickness of an elastic coating on one of the bodies in contact, we could vary the value of the shear strength by a factor three. This effect is interpreted semi-quantitatively via a model incorporating dissipation both at the interface and in the bulk of the materials. We have finally shown that the space-time dynamics of the onset of sliding is influenced by the torque applied to the interface by the friction force, when the latter is not exerted in the plane of the interface. In particular, via a digital image correlation-based measurement, we performed the first quantitative comparison with a recent model describing this torque effect
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Sliding dry contact under weak load : from surface's topographies to solids and interfaces dynamics
No full textCette thèse porte sur la dynamique, normale à l'interface, d'un contact sec en glissement stationnaire entre deux surfaces de topographies aléatoires, soumis à une faible charge normale. Dans ce contexte, le mouvement d'un patin sous son propre poids a été étudié expérimentalement. Des mesures par vibrométrie laser du déplacement et de la vitesse normale du patin ont confirmé que, lorsque la vitesse de glissement augmente, le patin transite entre un régime où le contact est permanent vers un régime dynamique où il subit décollements, chocs et rebonds.À basse vitesse, le mouvement normal résulte d'un filtrage géométrique des topographies. Les caractéristiques statistiques et spectrales de ce mouvement ont pu être décrites. Les influences de la rugosité, de la longueur de corrélation, de la largeur de bande du spectre de rugosité et de l'aire apparente de contact ont été identifiées et analysées. Ces résultats ont pu être reproduits par des modèles numériques, mais aussi analytiques en adaptant la théorie des valeurs extrêmes. Des modèles de type Bouncing Ball, dont l'excitation est supposée donnée par le processus de filtrage géométrique, ont également été mis en place. Ils reproduisent une large gamme d'observations en régime dynamique, de la transition aux vibro-impacts.Pour tester certaines hypothèses des modèles mis en place, un patin multi-voies original a été développé et a permis d'accéder à la localisation spatiale des micro-contacts transitoires entre surfaces antagonistes. On observe que les micro-contacts sont gouvernés par une longueur caractéristique à basse vitesse de glissement et par un temps caractéristique à haute vitesse. Les rotations du patin deviennent importantes à haute vitesse, modifiant la répartition des micro-contacts à la surface du patin.This PhD thesis addresses the issue of the dynamics, normal to the interface, of a dry steady-sliding contact between two random topographies under weak normal load. In this context, the motion of a slider under its own weight has been studied experimentally. Measurements, using a laser vibrometer, of the normal displacement and velocity of the slider confirm the existence of a transition, as the sliding speed increases, from a regime of permanent contact to a regime of lift-offs, shocks and rebounds.At low speed, the normal motion is due to a geometrical filtering of the topographies, the statistical and spectral properties of which have been described. The roles of the roughness, including its spectral breadth and correlation length, and of the apparent contact area have been identified and analyzed. Those results have been reproduced not only using numerical models, but also using analytical ones based on the extreme value theory. Bouncing-Ball-like models, the excitation of which is assumed to be given by the geometrical filtering, have also been implemented and match with a broad range of experimental observations in dynamical regime, from the transition to vibro-impacts.To test some of the hypothesis of the models, a new experimental multi-channel slider has been designed and has enabled access to the spatial localization of the transient micro-contacts between the antagonists surfaces. It has been shown that micro-contacts are governed by a characteristic length at low sliding speed and by a characteristic time at high speed. The rotational motion of the slider also increases with sliding speed, changing the micro-contact distribution along the surface of the slider
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Experiment and model of the rubber/road friction in rolling/sliding
No full textLes enjeux de consommation d'énergie et de sécurité ont fait du frottement entre les pneumatiques et la chaussée une propriété importante lors de la conception de nouveaux pneumatiques. Pour mesurer ces efforts de frottement deux cinématiques sont couramment utilisées : la mise en glissement et le roulement/glissement. Les lois de frottement issues des expériences de mise en glissement sont assez bien interprétées. En revanche, le lien qui existe entre ces lois de frottement et le comportement en roulement/glissement est encore mal compris. En particulier, les modèles de roulement/glissement n'incorporent pas la transition entre frottement statique et frottement dynamique, bien que cette phénoménologie soit bien établie expérimentalement. Dans cette thèse, nous proposons différents modèles de frottement en roulement/glissement qui étendent ceux de la littérature en intégrant explicitement la transition de frottement statique/dynamique. Pour tester ces modéles dans le cas du contact pneu/chaussée, nous avons réalisé des expériences selon les deux cinématiques, sur un contact simplifié élastomère/chaussée. A partir des expériences de mise en glissement, les paramètres de la loi de frottement sont identifiés, en fonction de la force normale appliquée, de la vitesse de glissement et de la nature de la chaussée. Ces résultats sont implémentés dans nos modèles, pour produire des prédictions en roulement/glissement, qui sont finalement comparées avec les mesures obtenues en roulement/glissement. De plus, certaines hypothèses des modèles ont été testées par des expériences de visualisation in situ du contact. En particulier nous confirmons, sur une interface élastomère/verre, la présence simultanée d'une zone collée et d'une zone en glissement en conditions de roulement/glissement.For safety and energy consumption issues, tyre friction has become an important property when designing tyres. There are two main kinematic conditions which are commonly used to measure friction forces : the onset of sliding and the rolling/sliding. The friction laws which are extracted from the onset of sliding experiments are rather well interpreted. In contrast, the link between those frictions laws and the rolling/sliding behaviour remains incompletely understood. In particular, the rolling/sliding models do not take into account the transition between static friction and dynamic friction, although it is a well-established phenomenology. In this manuscript, we propose diérent models of friction in rolling/sliding, which extend those of the literature by explicitly integrating a static/dynamic friction transition. To test these models in the case of a tyre/road contact, we performed experiment in the two kinematic conditions, on a simpliéd elastomer/road contact. From the onset of sliding experiments, we identify the parameters of the friction law as functions of the applied normal force, the sliding speed and the type of road. These results are used as inputs in our models to predict the rolling/sliding behaviour, and are eventually compared with the corresponding experiments. In addition, we have tested several assumptions made in the models by performing in situ contact imaging experiments. In particular we con_rm, on an elastomer/glass interface, the simultaneous presence of a sticking and a slipping zone in rolling/sliding conditions
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
