196,008 research outputs found
Onboard computing in forest machinery - A perspective from Australia and South Africa
No full textInternational research has demonstrated gains of up to 30% in improving utilization and productivity of
forest harvesting machinery through the use of onboard computers. However, use of onboard computing
is very much in its infancy in Australia and South Africa primarily due to lack of local experience in their
use.
Trials covering a range of onboard computers, forest machinery and forest types were conducted in
Australia and South Africa to study their use under local conditions. The results are being used in these
countries to promote the benefits and uptake of onboard computers. In Australia, this has been facilitated
through an online selection guide to assist in determining suitable onboard computers. In South Africa,
onboard computing research is aimed at identifying operational factors in primary and secondary
transport, which have significant impacts on production and utilization of applied equipment.
The presentation briefly describes the trials highlighting what worked and what didn’t work and then
brings together common findings and lessons learnt
Dr. Duane M. Jackson, Morehouse College, July 2011
No full textThis video is a conversation with Dr. Duane M. Jackson. Dr. Jackson talks about his paper, "Recall and the Serial Position Effect: The Role of Primacy and Recency on Accounting Students' Performance." Jackie Daniel, AUC Woodruff Library, is the interviewer
"Reflections on the subject of Emigration from Europe with a view to Settlement in the United States" By M. Carey.
No full text"Reflections on the subject of Emigration from Europe with a view to Settlement in the United States: containing bried sketches of the moral and political character of those states.
By M. Carey, member of the American philosophical, and of the American Antiquarian Society, and author of The Olive Branch, Cindiciae Hibernicae, essays on banking, on political economy, and on internal improvement.
To which are now added the English editor's comments on the subject; together with Important Advice to Emigrants, and Cautions Against Impositions Practiced in the Outports
Dispelling the Myths Behind First-author Citation Counts
No full textWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
Dr. Glendon Swarthout
No full textHosted by Roger M. Busfield, MSU Assistant Professor of Speech and Theater, Meet the Author is designed to introduce a general audience to a contemporary author and their work through in-depth interviews. This episode features a conversation between Dr. Glendon Swarthout, prolific author and English professor at MSU, and assistant professors Sam S. Baskett and Theodore B. Strandness
Simulation of thermal plant optimization and hydraulic aspects of thermal distribution loops for large campuses
No full textFollowing an introduction, the author describes Texas A&M University and its utilities system. After that, the author presents how to construct simulation models for chilled water and heating hot water distribution systems. The simulation model was used in a $2.3 million Ross Street chilled water pipe replacement project at Texas A&M University. A second project conducted at the University of Texas at San Antonio was used as an example to demonstrate how to identify and design an optimal distribution system by using a simulation model. The author found that the minor losses of these closed loop thermal distribution systems are significantly higher than potable water distribution systems. In the second part of the report, the author presents the latest development of software called the Plant Optimization Program, which can simulate cogeneration plant operation, estimate its operation cost and provide optimized operation suggestions. The author also developed detailed simulation models for a gas turbine and heat recovery steam generator and identified significant potential savings. Finally, the author also used a steam turbine as an example to present a multi-regression method on constructing simulation models by using basic statistics and optimization algorithms. This report presents a survey of the author??s working experience at the Energy Systems Laboratory (ESL) at Texas A&M University during the period of January 2002 through March 2004. The purpose of the above work was to allow the author to become familiar with the practice of engineering. The result is that the author knows how to complete a project from start to finish and understands how both technical and nontechnical aspects of a project need to be considered in order to ensure a quality deliverable and bring a project to successful completion. This report concludes that the objectives of the internship were successfully accomplished and that the requirements for the degree of Degree of Engineering have been satisfied
Evaluation of Manual Log Measurement Errors and Its Implications on Harvester Log Measurement Accuracy
No full textPrevious studies of harvester measurement accuracy assumed traditional manual log measurements were accurate and represented true log dimensions, which relies heavily on the assumption that logs are regular in shape. The objective of this study was to quantify the level of variability in manual log measurements and consider its impact on harvester calibration and accuracy assessments. Log length was measured along the top and each side and small-end diameter with callipers, a diameter tape, and a steel ruler in two radiata pine stands near Mt. Gam-bier in Southern Australia. Observed variability in manual log measurements was sufficient to affect harvester accuracy studies and calibration. Length variability on different sides of a log occurs mainly from non-square log ends. Differences due to observer were minor.Diameter measurement variability occurs mainly from the effect of stem eccentricity on each instrument, which is dependent on its number of stem contact points. Callipers have fewer contact points than a diameter tape and hence more variability. This variability was evident in comparisons between observers and instruments. Harvester accuracy studies need to minimize manual measurement variability to identify harvester measurement errors. Length should be measured on the same side measured by the harvester. Diameter should be measured with a diameter tape in preference to callipers as they have greater stem contact and less variability. Harvester calibration needs to minimize manual and harvester measurement variability to identify harvester measurement bias with the least number of logs to minimize the time required for these activities. In addition to the above suggestions relating to harvester accuracy study measurements, logs selected for calibration must be the most uniform in shape available to highlight harvester measurement biases
Intern experience at CH���M Hill, Inc.: an internship report
No full textIncludes author's vita"Submitted to the College of Engineering of Texas A&M University in partial
fulfillment of the requirement for the degree of Doctor of Engineering."Includes bibliographical referencesA review of the author's internship experience with CH���M HILL, Inc.
during the period September 1975 through May 1976 is presented. During this nine month
internship the author worked as an Engineer II in the Industrial Processes discipline of this
large consulting engineering firm... The author's prime responsibility was as one of three
lead design engineers on the design of a large wastewater treatment facility for a pulp mill
in Hoquiam, Washington owned by ITT Rayonier Inc. The work generally consisted of the design
of individual treatment units and associated piping and pumping. The purpose of the project
was to provide wastewater treatment capabilities that would satisfy the effluent limitations
(standards) imposed upon the mill by the State of Washington Department of Ecology and the
U.S. Environmental Protection Agency. The author's assignment also entailed necessary
interaction with the project manager and other CH���M HILL design engineers and support staff
members, the client's representatives, and representatives of two other consulting engineering
firms working on the project. Thus, the internship position at CH���M HILL provided considerable
experience coordinating the author's work with the work of other engineers, guiding the design
and administrative efforts of a support staff, and interacting regularly with the client and
other consulting firms. This broad exposure to a variety of engineering and organizational
problems provided a valuable educational experience
Transition to turbulence in a qblique shock-wave/boundary-layer interaction at M=15
No full textDirect numerical simulations are carried out for different forcing techniques to trigger transition during the interaction between an oblique shock-wave and a laminar boundary-layer at M = 1.5. Three forcing methods are used: a) forcing of oblique unstable modes, whose shape and behaviour are determined by the local linear stability theory, b) broadband free-stream acoustic disturbances, and c) a cold plasma flow control device. While the oblique-mode breakdown is dominant for low-amplitude forcing, long streaky structures drive the transition process in a high-amplitude disturbance environment. LES are also performed on the experimental setup by the Institute of Theoretical and Applied Mechanics (ITAM) from Novosibirsk State University with cold plasma actuation. As well as the disturbance type, the effect of Reynolds number and forcing amplitude will be investigated
Letter from Cedrick M. Shimo to the Office of Redress Administration, June 4, 1991
No full textA letter from Cedrick M. Shimo to the Office of Redress Administration arguing that John Y. Udaka is entitled to a redress payment.These materials are from box 73 and 74 of the Frank Chin Papers. The Frank Chin Papers contain personal and professional correspondence between Frank Chin and Michi Weglyn relating to particular projects on which either author was working as well as files related to the Day of Remembrance Tribute to Michi Weglyn
- …
