1,720,957 research outputs found
Sub-100 μs nanoimprint lithography at wafer scale
No full textDisplay Omitted A full 4¿ wafer is nanopatterned by an ultrafast thermal NIL process in 100μs.Stamps with integrated heater enable ultrafast cycles at very high temperature.The thermal cycle is implemented with a single short very intense current pulse.A new tool for the ultrafast NIL (or pulsed-NIL) process has been developed.The process applies to a wide range of thermoplastic materials. We present here an ultrafast thermal NIL technology, which enables the patterning of full wafers on the 100μs time-scale. This technique makes use of stamps with a heating layer integrated beneath their nanostructured surfaces. Injecting a single, short (<100μs), intense current pulse into the heating layer causes the surface temperature of the stamp to raise suddenly by hundreds of degrees¿C, resulting in the melting of the thermoplastic resist film pressed against it and the swift indentation of the nanostructures. This paper introduces the main aspects of this technology, namely the process concept, the stamp structure, and the main features of the equipment by which the process at the wafer scale was implemented
Effect of nanoimprint on the elastic modulus of PMMA: Comparison between standard and ultrafast thermal NIL
No full textThis paper is focused on the understanding of the effect of the nanoimprint lithography process on the elastic modulus of thin, thermoplastic films. In particular, we present the comparison between the standard and an ultrafast thermal NIL technology as well as the way both processes affect the top surface of poly(methyl methacrylate) (PMMA). The PeakForce QNMTM (Quantitative Nanomechanical Property Mapping) scanning probe technique was used to determine the Young’s modulus of PMMA by comparison with a polystyrene standard. We demonstrate that imprinted PMMA, regardless of the used method, shows a 9-fold increase of Young’s modulus compared to non-imprinted PMMA at least in the top 3-5 nm thick surface layer. This important finding proves that the ultrafast process with much higher temperatures, but also with much shorter process times, leads to elastic surface properties that are comparable to those of PMMA imprinted with the standard process. We have confirmed that annealing alone does not significantly influence the Young’s modulus
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Influence of nanostructured heterojunctions on the electrical properties of photovoltaic cells
Full text link2009/2010Le celle fotovoltaiche basate su strati sottili di materiali organici hanno raggiunto efficienze dell' 8.3% ed hanno le potenzialità per diventare un'alternativa a basso costo delle celle basate su silicio amorfo. Alcune delle problematiche legate alle proprietà intrinseche di generazione, separazione e trasporto delle cariche possono essere affrontate non solo con lo studio della chimica e dei processi per materiali organici e fullerene, ma anche con lo sviluppo di nuove architetture delle celle basate sul controllo e l'organizzazione alla scala del nanometro. Il presente lavoro di tesi è basato sulla convinzione che quest'ultimo approccio, complementare a quello basato sul miglioramento delle proprietà intrinseche dei materiali, contribuirà sostanzialmente al progresso di questo campo della ricerca applicata. L'obiettivo di questo lavoro è quello di dimostrare il principio di funzionamento di una serie di diversi e nuovi prototipi di dispositivi basati su micro- e nano-architetture. In particolare, abbiamo realizzato: un nanomodulo di 1 cm2 che mostra una tensione di circuito aperto di quasi 1 kV, una cella solare basata su un'eterogiunzione con interfaccia avente strutture di 20 nm interpenetrate, e abbiamo ottimizzato deposizione di ossido di indio stagno (ITO) per lo sviluppo di un nostro dispositivo di intrappolamento della luce basato su serie di microlenti. Tuttatavia, riteniamo che ulteriori sforzi nella stessa direzione siano necessari per dimostrare l'utilità delle nano-architetture nel fotovoltaico organico. Parte del lavoro di ricerca è stato dedicato allo sviluppo e messa in opera di strumentazione specifica per la lavorazione e caratterizzazione per il fotovoltaico come un evaporatore in vuoto ad angolo inclinato connesso ad una camera a guanti in azoto per la deposizione di metalli e di organici.Thin-film photovoltaic (PV) cells based on the bulk hetero-junction of organic materials reached a record efficiency of 8.3% and have the potential to become a lower-cost alternative to amorphous silicon. Some of the issues related to the intrinsic properties of generation, separation and transport of charges, may be addressed not just by working on the details of the chemistry and processing of the organic/fullerenes materials, but also by implementing new cell architectures organized and well controlled down to the nanoscale. The present work of thesis is based on the conviction that the latter approach, complementary to that focused on the improvement of the intrinsic properties of the materials, will substantially contribute to the progress of this field of applied research. The goal of this work is that of demonstrating the working principle of a series of different and new micro- and nano-architectures into prototypical organic solar devices. In particular, we realized: a 1 cm2 nanomodule with almost 1 kV of open circuit voltage, a solar cell with a controlled nanostructured interface heterojunction with interpenetrating features of 20 nm, and we optimized the sputtering deposition of indium tin oxide (ITO) for our light trapping device based on microlenses array. However, we believe that additional efforts in the same direction will be necessary to demonstrate the usefulness of nanoarchitectures in organic photovoltaics. Part of the research work was devoted to the development and the commission of specific instrumentation for PV processing and characterization as an oblique angle vacuum evaporator connected to a nitrogen glove-box for the deposition of metals and organics.XXIII Ciclo198
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
