169,938 research outputs found
Going Beyond Counting First Authors in Author Co-citation Analysis
No full textThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Mitomycin C in highly myopic eyes - Author reply
No full textOphthalmology. 2005 Feb;112(2):208-18; discussion 219.
Mitomycin C modulation of corneal wound healing after photorefractive keratectomy in highly myopic eyes.
Gambato C, Ghirlando A, Moretto E, Busato F, Midena E.
SourceRefractive Surgery Service and Antimetabolite Therapy Research Unit, Department of Ophthalmology, University of Padova, Padova, Italy.
Abstract
PURPOSE: To evaluate the role of topical mitomycin C in corneal wound healing (CWH) after photorefractive keratectomy (PRK) in highly myopic eyes.
DESIGN: Prospective, double-masked, randomized clinical trial.
PARTICIPANTS: Seventy-two eyes of 36 patients affected by high (>7 diopters) myopia.
METHODS: In each patient, one eye was randomly assigned to PRK with intraoperative topical 0.02% mitomycin C application, and the fellow eye was treated with a placebo. Postoperatively, mitomycin C-treated eyes received artificial tears (3 times daily, tapered in 3 months), whereas the fellow eye was treated with fluorometholone sodium 2% and artificial tears (3 times daily, tapered in 3 months).
MAIN OUTCOME MEASURES: Uncorrected visual acuity (UCVA) and best-corrected visual acuity (BCVA), contrast sensitivity, manifest refraction, and biomicroscopy. Contrast sensitivity was determined using the Pelli-Robson chart. Corneal confocal microscopy documented CWH.
RESULTS: Mean follow-up was 18 months (range, 12-36). No side effects or toxic effects were documented. At 12-month follow-up examination, UCVAs (logarithm of the minimum angle of resolution) were 0.4+/-0.48 and 0.5+/-0.53 (P = .03) in mitomycin C-treated eyes and corticosteroid-treated eyes, respectively. At 1 year, corneal haze developed in 20% of corticosteroid-treated eyes, versus 0% of mitomycin C-treated eyes. At 12, 24, and 36 months, corneal confocal microscopy showed activated keratocytes and extracellular matrix significantly more evident in untreated eyes (Ps = 0.004, 0.024, and 0.046, respectively).
CONCLUSION: Topical intraoperative application of 0.02% mitomycin C can reduce haze formation in highly myopic eyes undergoing PRK.
Comment in
Ophthalmology. 2006 Feb;113(2):357; author reply 357-8
Dispelling the Myths Behind First-author Citation Counts
No full textWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
A Multi-Language Comparison of Influences on Author Verification using Character N-Grams
No full textWe create a new multi-language corpus for author verification based on Wikipedia talkpages, and evaluate the influence that differences in topic and time have on character n-gram author profiles. Topic alignment between two texts is found to increase author verification precision, and an authors writing style is found to change over time, but not more significantly after 3 years than after 1 year.Information ArchitectureWISElectrical Engineering, Mathematics and Computer Scienc
Crystal morphology and surface reactivity studies of calcium hydroxide
No full textThis thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Calcium hydroxide samples, obtained as a precipitate from the mixing of solutions of sodium hydroxide with a variety of calcium salts in the optional presence of ethanol and a silylating agent, have been characterised by the techniques of nitrogen adsorption, water vapour adsorption , thermogravimetric analysis, Fourier-transform infra-red spectroscopy, ultra-violet spectroscopy and electron microscopy. The morphology of the samples varied from octahedral crystals to hexagonal prisms to sheets. The individual morphology depends on the conditions of precipitation, the nature and concentration of the calcium salt(s) and the nature of the precipitation medium. It has been shown that a large excess of sodium hydroxide results in octahedral forms, calcium salt(s) in approximate equimolar amount or in large excess to the sodium hydroxide results in hexagonal forms, and sheets are formed in the presence of ethanolic precipitation medium. A poisoning mechanism has been suggested in terms of the morphological properties of the samples. It has been found that the sheet forms of calcium hydroxide can be stabilised by reaction with a silylating agent, resulting in greater thermal stability and chemical stability of the surface. Silylation was found not to occur by direct contact between the precipitated calcium hydroxide samples and silylating agents. Silylation only occurred when precipitation was carried out in the presence of a solution of the silylating agent in absolute ethanol. The silylation of the surface of calcium hydroxide has been found to stabilise the material. Reaction of this with 3-aminopropyltriethoxysilane formed an intermediate which subsequently reacted with p-nitrobenzoyl chloride to form an inorganic - organic composite. The technique of thermogravimetric analysis has been employed to measure the thermal stability of the samples. It has been found that the samples exhibit major weight losses at around 688K for the non-silylated samples and around 918K for the silylated samples. The BETnitrogen and the BET-H20 surface areas of the samples range typically from --1 to 43 m2g-1 , and from 9 to 798 m2g-1 respectively. On the basis of this evidence, taken together with the isotherm shapes it has been shown that: the samples are non-porous; non-silylated calcium hydroxide samples are more hydrophobic than the silylated samples, but upon heat-treatment in air below the decomposition temperature the silylated samples became more hydrophobic, whereas the non-silylated samples became more hydrophilic; samples heated in air at above the decomposition temperature exhibit a dramatic increase in hydrophilicity, the H 20-BET surface areas becoming —800 m2g-1 for non silylated samples, compared to 368 - 600 m 2g-1 for silylated samples, indicative of chemisorption following decomposition of the calcium hydroxide to form calcium oxide
A 0.12mm<sup>2</sup> Wien-Bridge Temperature Sensor with 0.1°C (3σ) Inaccuracy from -40°C to 180°C
No full text Resistor-based temperature sensors can achieve much higher resolution and energy efficiency than conventional BJT-based sensors [1], but they typically occupy more area (> 0.25 mm 2 ) and have lower operating temperatures (le 125 {circ} {C}) [2]-[4]. This work describes a 0.12mm 2 resistor-based sensor that uses a Wien-bridge (WB) filter to achieve 0.1 {circ} {C} (3 sigma) inaccuracy from - 40 {circ} {C} to 180 {circ} {C}. Compared to a state-of-the-art WB sensor [4], it occupies 6 × less area and achieves comparable relative accuracy over a 76% wider operating range. Session 10.3 Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic InstrumentationMicroelectronic
A ±25A Versatile Shunt-Based Current Sensor with 10kHz Bandwidth and ±0.25% Gain Error from -40°C to 85°C Using 2-Current Calibration
No full textAccurate current sensing is critical in many industrial applications, such as battery management and motor control. Precise shunt-based current sensors have been reported with gain errors of less than 1% over the industrial temperature range (-40°C to 85°C) [1]–[4]. However, since they are intended for coulomb counting, their bandwidth is limited to a few tens of Hz, making them unsuitable for battery impedance or motor-current sensing. This paper presents a current sensor with a wide (10kHz) bandwidth and a tunable temperature compensation scheme (TCS), which allows it to be flexibly used with different types of shunts while maintaining high accuracy. A low-cost room-temperature calibration scheme is proposed to optimize gain flatness over temperature by exploiting the shunt's self-heating at large currents. Over the industrial temperature range and a ±25A current range, it achieves state-of-the-art gain error (±0.25%) with both low-cost PCB and stable metal-alloy shunts.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic InstrumentationMicroelectronic
The Drinking Water Response to the Indian Ocean Tsunami, including the Role of Household Water Treatment
No full textCommunity health workers and stand-alone or integrated case management of malaria: a systematic literature review.
No full textA systematic literature review was conducted to assess the effectiveness of strategies to improve community case management (CCM) of malaria. Forty-three studies were included; most (38) reported indicators of community health worker (CHW) performance, 14 reported on malaria CCM integrated with other child health interventions, 16 reported on health system capacity, and 13 reported on referral. The CHWs are able to provide good quality malaria care, including performing procedures such as rapid diagnostic tests. Appropriate training, clear guidelines, and regular supportive supervision are important facilitating factors. Crucial to sustainable success of CHW programs is strengthening health system capacity to support commodity supply, supervision, and appropriate treatment of referred cases. The little evidence available on referral from community to health facility level suggests that this is an area that needs priority attention. The studies of integrated CCM suggest that additional tasks do not reduce the quality of malaria CCM provided sufficient training and supervision is maintained
An Article About Albertus C. Van Raalte, Author Unknown, Except for Parts Taken from an Article by Anna C. Post
No full textAn article about Albertus C. Van Raalte, author unknown, except for parts taken from an article by Anna C. Post. The author knew first generation persons in the Holland settlement and therefore, the article has some value.https://digitalcommons.hope.edu/vrp_1890s/1012/thumbnail.jp
- …
