1,720,955 research outputs found
Preparation and modification of thin carbon films
Get PDFThin carbon films, in the form of pyrolysed photoresist films (PPF), are being increasingly used for electrochemical devices. This research investigates the preparation and subsequent modification of PPF through both the electrochemical reduction of aryl diazonium salts and through the UV attachment of alkenes to the iodinated surface.
The pyrolysis of photoresist films produces PPF that is a smooth (rms < 0.5 nm), amorphous carbon film that can be used for further electrochemical studies. The pyrolysis method was investigated to see the affect of holding the pyrolysis at three different temperatures during the pyrolysis and the corresponding times for which they were held; the effect of gas flow on the PPF was also addressed. It was seen that the gas flow whilst not affecting the roughness of the surfaces, the electrochemical cleanliness towards ferricyanide was affected, whilst different temperatures during the pyrolysis and the length of time they held was also seen to have some affect on both the electrochemical performance as well.
The modification of PPF was carried out with aryl diazonium derivatives of oligo(ethylene glycols) (OEGs). The protein resistance of these modified surfaces were also investigated and compared to the equivalent gold modified surfaces, both the effect of the chain length of the OEG as well as the change in hydrophilicity of the distal end was investigated. For a comparison OEG thiol modified gold surfaces were used. A Fluorescein isothiocyanate labelled protein, bovine serum albumin, was used and two methods employed to study the protein resistance. These methods were the elution of adsorbed protein from surface and the measurement of the protein whilst on the surface using fluorescence microscopy.
The use of iodine plasma to modify the PPF produces a surface similar to that of both hydrosilysed silicon and hydrogenated diamond surfaces. The use of UV light at 514 nm to activate the surface and attach alkenes was employed. UV addition of alkenes to the surface allows patterning as was observed via the modification of the iodinated carbon film with undec-10-enyl-2,2,2-trifluoroethanethioate on areas exposed to light and the deprotection of the thiol which was then exposed to gold nano particles and surface patterning was investigated with SEM. This will allow the production of nanoarray sensors in the future
Protein resistance of surfaces modified with oligo(ethylene glycol) aryl diazonium derivatives
Get PDFAnti-fouling surfaces are of great importance for reducing background interference in biosensor signals. Oligo(ethylene glycol) (OEG) moieties are commonly used to confer protein resistance on gold, silicon and carbon surfaces. Herein, we report the modification of surfaces using electrochemical deposition of OEG aryl diazonium salts. Using electrochemical and contact angle measurements, the ligand packing density is found to be loose, which supports the findings of the fluorescent protein labelling that aryl diazonium OEGs confer resistance to nonspecific adsorption of proteins albeit lower than alkane thiol-terminated OEGs. In addition to protein resistance, aryl diazonium attachment chemistry results in stable modification. In common with OEG species on gold electrodes, OEGs with distal hydroxyl moieties do confer superior protein resistance to those with a distal methoxy group. This is especially the case for longer derivatives where superior coiling of the OEG chains is possible. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Light-induced organic monolayer modification of iodinated carbon electrodes
Get PDFWe report the modification of carbon electrodes formed from pyrolyzed photoresist films (PPF) via plasma iodination followed by the organic monolayer modification of these surfaces. The iodinated surfaces were characterized using cyclic voltammetry, atomic force microscopy, and X-ray photoelectron spectroscopy to enable the optimization of the iodination while preserving the stability and smoothness of the carbon surface. Subsequently, the C-I surface was further modified with molecules that possess an alkene or alkyne at one end through light activation with low energy (visible range λ 514 nm). The versatility of the modification reaction of the C-I surfaces is shown by reactions with undecylenic acid, 1,8-nonadiyne, and S-undec-10-enyl-2,2,2- trifluoroethanethioate (C11-S-TFA). Modification with 1,8-nonadiyne allows further modification via "click" chemistry with azido-terminated oligo(ethylene oxide) molecules demonstrated briefly to alter the hydrophilicity of the surface after attachment of ethylene oxide moieties. Furthermore, patterning of C11-S-TFA was demonstrated using a simple photolithography technique. Deprotection of the C11-S-TFA gave a free thiol allowed patterning of gold nanoparticles on the surface as verified using scanning electron microscopy (SEM). These results demonstrate that plasma iodination to form C-I is a versatile, simple, and modular approach to functionalize the carbon surface. © 2013 American Chemical Society
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
