1,720,991 research outputs found
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Additive Fertigung von Keramiken mittels Mikrofluidik und elektrophoretischer Abscheidung
No full textIn dieser Dissertation wurde untersucht, inwieweit die Kombination von Mikrofluidik mit elektrophoretischer Formgebung zur additiven Herstellung von Keramikbauteilen genutzt werden kann. Mit Verfahren der Mikrofluidik sollten räumliche Strukturierung und Materialdifferenzierung erfolgen, während die elektrophoretische Abscheidung für die Ausbildung einer homogenen Mikrostruktur sorgt. Es wurde eine Versuchsanlage aufgebaut, die eine kontrollierte elektrophoretische Abscheidung von Keramikpartikeln, die durch eine Hohlelektrode zugeführt werden, auf porösen Membranen ermöglicht. Die Anlage bietet – im Unterschied zu bereits beschriebenen Verfahren – das Potenzial für eine hochgradige Parallelisierung und Multimaterialdruck. Schließlich wurden Finite-Elemente-Modelle zur Feldverteilung und zur Partikelbewegung entwickelt, mit denen die experimentellen Ergebnisse verglichen wurden. Bei den Versuchen traten viele in ihrem Ausmaß nicht erwartete Phänomene auf: elektrohydrodynamische Effekte und nichtelektrisch verursachte Strömungen des Lösungsmittels, die die Ausbeute und Reproduzierbarkeit sowie die Eigenschaften der abgeschiedenen Strukturen verschlechterten, was zusätzlichen Untersuchungen notwendig machte. In Ethanol wurden relevante Abscheideparameter systematisch variiert und die Struktur und das Gefüge der abgeschiedenen Al2O3-Partikel methodisch analysiert.
Die Arbeit war Teil eines von der Deutschen Forschungsgemeinschaft geförderten Sachbeihilfe-Projekts (KU 1327/10-1 | RA 614/7-1).:Inhaltsverzeichnis
1 Einleitung 7
2 Stand der Forschung 8
2.1 Stand der Forschung additive Fertigung keramischer Bauteile 8
2.1.1 Feedstockbasierte additive Fertigungsverfahren 9
2.1.2 Pulverbasierte additive Fertigungsverfahren: 10
2.1.3 Schlickerbasierte additive Fertigungsverfahren 11
2.2 Stand der Forschung elektrophoretische Abscheidung 12
2.3 Stand der Forschung Dielektrophorese 15
2.4 Stand der Forschung EHD-Effekt 16
3 Methodisches Vorgehen 19
3.1 Allgemeiner Aufbau 19
3.2 Elektroden 22
3.3 Lösungsmittel 24
3.4 Abscheidemembranen 25
3.5 Partikel und Suspensionen 27
3.6 Durchführung der Depositionsexperimente 30
3.7 Analyse der abgeschiedenen Strukturen 32
3.7.1 Konfokale 3D Laserscanningmikroskopie (CLSM) 32
3.7.2 Dynamische Differenzkalorimetrie und Thermogravimetrie (DSC/TGA) 33
3.7.3 Rasterelektronenmikroskopie (REM) und Varianzanalyse 33
4 Computersimulationen 35
5 Experimentelle Ergebnisse 41
5.1 Untersuchung des EHD-Effekts 41
5.2 Abscheidung mit verschiedenen Lösungsmitteln und Partikeln 45
5.3 Abscheidung von PEI-Aluminiumoxidpartikeln in Ethanol 51
5.4 DSC-TGA einer bedruckten Membran 60
5.5 Varianzanalyse der Gefügehomogenität elektrophoretisch abgeschiedener
Proben 63
6 Zusammenfassung und Ausblick 66
7 Quellenverzeichnis 69
8 Formelverzeichnis 78
9 Tabellenverzeichnis 78
10 Abbildungsverzeichnis 79
11 Anhang 83In this dissertation it was examined to what extent the combination of microfluidics with electrophoretic shaping can be used for the additive manufacturing of ceramic components. The spatial structuring and material differentiation should take place using microfluidic methods, while the electrophoretic deposition ensures the formation of a homogeneous microstructure. A test facility was set up that enables controlled electrophoretic deposition of ceramic particles, which are fed through a hollow electrode, onto porous membranes. In contrast to known processes, the system offers the potential for high-quality parallelization and multi-material printing. Finally, finite element models for field distribution and particle movement were developed, with which the experimental results were compared. During the experiments, many phenomena that were not expected occurred: electrohydrodynamic effects and non-electrically induced solvent flows, which reduced the yield and reproducibility as well as the properties of the deposited structures, that made additional studies necessary. We systematically varied relevant deposition parameters in the solvent ethanol and the microstructure of the deposited Al2O3 particles was methodically analyzed.
The work was part of a research grant project funded by the German Research Foundation (KU 1327 / 10-1 | RA 614 / 7-1).:Inhaltsverzeichnis
1 Einleitung 7
2 Stand der Forschung 8
2.1 Stand der Forschung additive Fertigung keramischer Bauteile 8
2.1.1 Feedstockbasierte additive Fertigungsverfahren 9
2.1.2 Pulverbasierte additive Fertigungsverfahren: 10
2.1.3 Schlickerbasierte additive Fertigungsverfahren 11
2.2 Stand der Forschung elektrophoretische Abscheidung 12
2.3 Stand der Forschung Dielektrophorese 15
2.4 Stand der Forschung EHD-Effekt 16
3 Methodisches Vorgehen 19
3.1 Allgemeiner Aufbau 19
3.2 Elektroden 22
3.3 Lösungsmittel 24
3.4 Abscheidemembranen 25
3.5 Partikel und Suspensionen 27
3.6 Durchführung der Depositionsexperimente 30
3.7 Analyse der abgeschiedenen Strukturen 32
3.7.1 Konfokale 3D Laserscanningmikroskopie (CLSM) 32
3.7.2 Dynamische Differenzkalorimetrie und Thermogravimetrie (DSC/TGA) 33
3.7.3 Rasterelektronenmikroskopie (REM) und Varianzanalyse 33
4 Computersimulationen 35
5 Experimentelle Ergebnisse 41
5.1 Untersuchung des EHD-Effekts 41
5.2 Abscheidung mit verschiedenen Lösungsmitteln und Partikeln 45
5.3 Abscheidung von PEI-Aluminiumoxidpartikeln in Ethanol 51
5.4 DSC-TGA einer bedruckten Membran 60
5.5 Varianzanalyse der Gefügehomogenität elektrophoretisch abgeschiedener
Proben 63
6 Zusammenfassung und Ausblick 66
7 Quellenverzeichnis 69
8 Formelverzeichnis 78
9 Tabellenverzeichnis 78
10 Abbildungsverzeichnis 79
11 Anhang 8
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
Author-wise bibliometric analysis based on entropy.
No full textAuthor-wise bibliometric analysis based on entropy.</p
Author Under Sail The Imagination of Jack London, 1893-1902
No full textIn Author Under Sail, Jay Williams offers the first complete literary biography of Jack London as a professional writer engaged in the labor of writing. It examines the authorial imagination in London's work, the use of imagination in both his fiction and nonfiction, and the ways he defined imagination in the creative process in his business dealings with his publishers, editors, and agents. In this first volume of a two-volume biography, Williams traverses the years 1893 to 1902, from London's "Story of a Typhoon" to The People of the Abyss. The Jack London who emerges in the pages of Author Under Sail is a writer whose partnership with publishers, most notably his productive alliance with George Brett of Macmillan, was one of the most formative in American literary history. London pioneered many author models during the heyday of realism and naturalism, blurring the boundaries of these popular genres by focusing on absorption and theatricality and the representation of the seen and unseen. London created an impassioned, sincere, and extremely personal realism unlike that of other American writers of the time. Author Under Sail is a literary tour de force that reveals the full range of London as writer, creative citizen, and entrepreneur at the same time it sheds light on the maverick side of machine-age literature.Intro -- Title Page -- Copyright Page -- Dedication -- Contents -- Acknowledgments -- Introduction -- 1. Spirit Truth -- 2. From Absorption to Theatricality and Back Again -- 3. "I Will Build a New Present" -- 4. Sons as Authors -- 5. Fathers as Publishers -- 6. The Daughter as Author -- 7. Lovers as Authors -- 8. At Sea with the Family -- 9. Yellow News, Yellow Stories -- 10. The Return Home -- Notes -- Bibliography -- Index -- About Jay WilliamsIn Author Under Sail, Jay Williams offers the first complete literary biography of Jack London as a professional writer engaged in the labor of writing. It examines the authorial imagination in London's work, the use of imagination in both his fiction and nonfiction, and the ways he defined imagination in the creative process in his business dealings with his publishers, editors, and agents. In this first volume of a two-volume biography, Williams traverses the years 1893 to 1902, from London's "Story of a Typhoon" to The People of the Abyss. The Jack London who emerges in the pages of Author Under Sail is a writer whose partnership with publishers, most notably his productive alliance with George Brett of Macmillan, was one of the most formative in American literary history. London pioneered many author models during the heyday of realism and naturalism, blurring the boundaries of these popular genres by focusing on absorption and theatricality and the representation of the seen and unseen. London created an impassioned, sincere, and extremely personal realism unlike that of other American writers of the time. Author Under Sail is a literary tour de force that reveals the full range of London as writer, creative citizen, and entrepreneur at the same time it sheds light on the maverick side of machine-age literature.Description based on publisher supplied metadata and other sources.Electronic reproduction. Ann Arbor, Michigan : ProQuest Ebook Central, YYYY. Available via World Wide Web. Access may be limited to ProQuest Ebook Central affiliated libraries
- …
