1,720,959 research outputs found
The influence of rf plasma time on the carbonitriding treatment of titanium
No full textInductively coupled radio frequency plasma surface treatment was applied to commercially pure titanium sheets. The goal was to increase the efficiency of the carbonitriding process, i.e., to decrease the plasma treatment time to a few tens of minutes instead of several hours. The effects of different plasma-processing times on the microstructure and mechanical properties of plasma-carbonitrided Ti were examined. The characteristics of the carbonitrided layer were investigated by microhardness testing, surface roughness measurements, optical microscopy and X-ray diffraction. The surface microhardness and the thickness of the compound layer of carbonitrided Ti increase with the plasma-processing time. Surface energy, yield strength and Young's modulus for carbonitrided titanium were calculated from the Vickers microhardness data. An attempt was made to interpret the high carbonitriding rate and the high microhardness values of carbonitrided titanium with respect to previously published results
Influence of rf-power on the plasma carbonitriding of titanium
No full textThe present work reports on the effect of input plasma processing power in the range of 350-650W on the microstructure and mechanical properties of plasma nitrided Ti. The plasma processing time was 20 min and a gas mixture of 15% C2H2 and 85% N-2 was used. The characteristics of the carbonitrided layer have been investigated by microhardness measurements, surface roughness measurements, optical microscopy, and X-ray diffraction. The measured surface hardness values of the compound layer shows a maximum of 2050 HV0.1 for the sample treated at a plasma power of 550W. The thickness of the carbonitrided layer continuously increases as the plasma power increases. Moreover, the highest carbonitriding rate of 3.52 mu m(2)/s was observed when the input plasma power was adjusted at 600 W. This high carbonitriding rate of treated titanium samples is ascribed to the high concentration of active carbon and nitrogen species in the plasma atmosphere and the formed microcracks in the near surface of the sample during the plasma processing. (C) 2007 Elsevier B.V. All rights reserved
Surface treatment of Ti-6Al-4V alloy by rf plasma nitriding
No full textThe Ti-6Al-4V alloy was treated by inductively coupled rf plasma nitriding. The effects of plasma-processing time in the range of 5-35 min on the microstructure and the mechanical properties of the plasma-nitrided Ti-6Al-4V samples were studied. The plasma power input was adjusted at 450 W and pure N(2) gas was introduced to establish a treatment pressure of 8.0-8.4 x 10(-2) mbar. The characteristics of the nitrided layers have been investigated by microhardness testing, surface roughness measurements, optical microscopy, and x-ray diffraction. The results show that the surface microhardness increases as the plasma- processing time increases to reach 2000 HV0.1 at a plasma-processing time of 35 min. A high nitriding rate of 2.81 mu m(2) s(-1) at a plasma-processing time of 25 min was achieved. The formation of the hard phases TiN, Ti(2)N, and Ti( N) in the Ti-6Al-4V surfaces are found to be the reason for the increased microhardness. Surface energy, yield strength and Young's modulus for the nitrided Ti-6Al-4V alloy were calculated from the Vickers microhardness data
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
