1,720,957 research outputs found

    Pyrolysed cork-geopolymer composites: A novel and sustainable EMI shielding building material

    No full text
    In this investigation, and for the first time, pyrolysed sustainable cork was used to produce waste-based geopolymer-cork composites with enhanced electromagnetic interference (EMI) shielding properties. The influence of the pyrolysed cork amount and the geopolymer porosity on the EMI shielding ability of the composites was studied. The maximum total shielding effectiveness (SET) values achieved by these novel building materials (−13.8 to −15.9 dB) are equal to any other reported geopolymer microwave (MW) absorbers over the X-band, despite containing much lower carbon content. In addition, our composites were produced using an industrial waste (biomass fly ash) as raw material and recycled wine stoppers as a carbon source (2.5–3.75 wt%). This strategy is different from those implemented in the only other reported MW absorbing geopolymers, which used standard commercial chemical precursors, and the added carbon component is also a non-renewable commercial product, added in much greater quantities (10× more). Therefore, our approach not only decreases the consumption of virgin raw materials (e.g. kaolin), but also enhances the global sustainability of the construction sector

    Going Beyond Counting First Authors in Author Co-citation Analysis

    Full text link
    The present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed

    Variations on the Author

    Full text link
    “Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship

    Appropriate Similarity Measures for Author Cocitation Analysis

    Full text link
    We provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis

    Hexagonal ferrite fibres and nanofibres

    No full text
    Hexagonal ferrites, or hexaferrites, are hugely important materials commercially and technologically, with common applications as permanent magnets, magnetic recording and data storage media, components in electrical devices operating at wireless frequencies, and as GHz electromagnetic wave absorbers for EMC, RAM and stealth technologies. Hexaferrites are all ferrimagnetic materials, and their magnetic properties are intrinsically linked to their crystalline structures, all having a strong magnetocrystalline anisotropy; that is the induced magnetisation has a preferred orientation within the crystal structure. They can be divided into two main groups: those with an easy axis of magnetisation (known as uniaxial), the hard hexaferrites, and those with an easy plane (or cone) of magnetisation (known as ferroxplana or hexaplana), soft ferrites. The common hexaferrite members are: « M-type ferrites, such as BaFe12O19 and SrFe12O19« Z-type ferrites (Ba3Me2Fe24O41) « Y-type ferrites (Ba2Me2Fe12O22) « W-type ferrites (BaMe2Fe16O27) « X-type ferrites (Ba2Me2Fe28O46) « U-type ferrites (Ba4Me2Fe36O60) where Me = a small 2+ ion such as cobalt, nickel or zinc, and Ba can be fully substituted by Sr. Generally, the M ferrites are hard, the Y, Z and U ferrites are soft, and the W and X ferrites can very between these two extremes, but all have large magnetisation (M) values. There is currently increasing interest in composite materials containing hexaferrite fibres. It had been predicted that properties such as thermal and electrical conductivity, and magnetic, electrical and optical behaviour will be enhanced in material in fibrous form. This is because a continuous fine fibre can be considered as effectively one-dimensional, and it does not behave as a homogeneously distributed solid. Although the intrinsic magnetisation of the material is unaffected, the effective magnetisation of an aligned fibre sample should be greater when a field is applied parallel with fibre alignment compared to when applied perpendicularly to fibre alignment. This feature was first demonstrated by the author for aligned hexaferrite fibres in 2006. This chapter will deal with progress in the manufacture and properties of hexaferrite fibres, from the first syntheses of BaM, SrM, Co2Y, Co2Z, Co2W, Co2X and Co2U micron-scale fibres by the author 12-15 years ago, to recent developments in M ferrite hollow fibres and nanofibres, and hexaferrite-coated CNTs (carbon nanotubes).The relative properties of all reported hexaferrite fibres are compared and summarised at the end of this chapter. © (2016) Trans Tech Publications, Switzerland

    Dispelling the Myths Behind First-author Citation Counts

    Full text link
    We conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more sophisticated methods

    Author Index

    No full text
    Nao informado

    koamabayili/VECTRON-author-checklist: VECTRON author checklist

    No full text
    We have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
    corecore