29 research outputs found
Recommended from our members
Precise Measurement of B-mode polarization signal from the cosmic microwave background with Polarbear and the Simons Array
No full textThroughout history, human beings have always sought to answer the question ''what was the origin of the universe?'' The Cosmic Microwave Background (CMB) is one of the most essential scientific tools that will help us better understand the universe. The temperature maps of the CMB have allowed us to study the nature of the early universe through the standard ΛCDM model as well as to describe its evolution. Nevertheless, many questions remain. The next step in finding the answer lies in the measurement of the B-mode polarization of the CMB. These faint signals from the primordial universe are expected to be key pieces of evidence of the inflationary gravitational wave. Successful detection of this B-mode polarization would not only serve as direct evidence of the inflation theory but also lead to constraining of inflationary model and the energy scale of inflation. Moreover, the gravitational lensing of CMB E-mode polarization to B-mode polarization signal at small angular scales will allow us to trace back to the distribution of matter in our universe.This dissertation describes the details of the Polarbear instrument which is designed to detect CMB B-mode polarization. The results from the first and second observational season are also described. Furthermore, this dissertation discusses the development of the Simons Array instrument, which is the expansion of Polarbear with expanded capabilities and increased sensitivity. The Simons Array is scheduled to deploy in 2018
Recommended from our members
Understanding the Phase of Responsivity and Noise Sources in Frequency-Domain Multiplexed Readout of Transition Edge Sensor Bolometers
No full textCosmic microwave background (CMB) experiments have deployed focal planes with O(104) transition edge sensor (TES) bolometers cooled to sub-Kelvin temperatures by multiplexing the readout of many TES channels onto a single pair of wires. Digital Frequency-domain Multiplexing (DfMux) is a multiplexing technique used in many CMB polarization experiments, such as the Simons Array, SPT-3 G, and EBEX. The DfMux system studied here uses LC filters with resonant frequencies ranging from 1.5 to 4.5 MHz connected to an array of TESs. Each detector has an amplitude-modulated carrier tone at the resonant frequency of its accompanying LC resonator. The signal is recovered via quadrature demodulation where the in-phase (I) component of the demodulated current is in phase with the complex admittance of the circuit and the quadrature (Q) component is orthogonal to I. Observed excess current noise in the Q component is consistent with fluctuations in the resonant frequency. This noise has been shown to be non-orthogonal to the phase of the detector’s responsivity. We present a detailed analysis of the phase of responsivity of the TES and noise sources in our DfMux readout system. Further, we investigate how modifications to the TES operating resistance and bias frequency can affect the phase of noise relative to the phase of the detector responsivity, using data from Simons Array to evaluate our predictions. We find that both the phase of responsivity and phase of noise are functions of the two tuning parameters, which can be purposefully selected to maximize signal-to-noise (SNR) ratio
Constraints on axion-like polarization oscillations in the cosmic microwave background with POLARBEAR
No full textVery light pseudoscalar fields, often referred to as axions, are compelling
dark matter candidates and can potentially be detected through their coupling
to the electromagnetic field. Recently a novel detection technique using the
cosmic microwave background (CMB) was proposed, which relies on the fact that
the axion field oscillates at a frequency equal to its mass in appropriate
units, leading to a time-dependent birefringence. For appropriate oscillation
periods this allows the axion field at the telescope to be detected via the
induced sinusoidal oscillation of the CMB linear polarization. We search for
this effect in two years of POLARBEAR data. We do not detect a signal, and
place a median upper limit of on the sinusoid amplitude
for oscillation frequencies between and
, which corresponds to axion masses between and . Under the
assumptions that 1) the axion constitutes all the dark matter and 2) the axion
field amplitude is a Rayleigh-distributed stochastic variable, this translates
to a limit on the axion-photon coupling .Comment: 17 pages, 5 figures, 2 tables. Published in Physical Review
Design and performance of a gain calibration system for the POLARBEAR-2a receiver system at the Simons Array cosmic microwave background experiment
No full textWe present an advanced system for calibrating the detector gain responsivity with a chopped thermal source for POLARBEAR-2a, which is the first receiver system of a cosmic microwave background (CMB) polarimetry experiment: the Simons Array. Intensity-to-polarization leakage due to calibration errors between detectors can be a significant source of systematic error for a polarization-sensitive experiment. To suppress this systematic uncertainty, POLARBEAR-2a calibrates the detector gain responsivities by observing a chopped thermal source before and after each period of science observations. The system includes a high-temperature ceramic heater that emits blackbody radiation covering a wide frequency range and an optical chopper to modulate the radiation signal. We discuss the experimental requirements of gain calibration and system design to calibrate POLARBEAR-2a. We evaluate the performance of our system during the early commissioning of the receiver system. This calibration system is promising for the future generation of CMB ground-based polarization observations
Design and performance of a gain calibration system for the POLARBEAR-2a receiver system at the Simons Array cosmic microwave background experiment
No full textWe present an advanced system for calibrating the detector gain responsivity with a chopped thermal source for POLARBEAR-2a, which is the first receiver system of a cosmic microwave background (CMB) polarimetry experiment: the Simons Array. Intensity-to-polarization leakage due to calibration errors between detectors can be a significant source of systematic error for a polarization-sensitive experiment. To suppress this systematic uncertainty, POLARBEAR-2a calibrates the detector gain responsivities by observing a chopped thermal source before and after each period of science observations. The system includes a high-temperature ceramic heater that emits blackbody radiation covering a wide frequency range and an optical chopper to modulate the radiation signal. We discuss the experimental requirements of gain calibration and system design to calibrate POLARBEAR-2a. We evaluate the performance of our system during the early commissioning of the receiver system. This calibration system is promising for the future generation of CMB ground-based polarization observations
Development of an optical detector testbed for the Simons Observatory
No full textThe Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment with three small-aperture telescopes and one large-aperture telescope, which will observe from the Atacama Desert in Chile. In total, SO will field over 60,000 transition edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain numerous cosmological quantities, as outlined in The Simons Observatory Collaboration et al. (2019). To verify consistency of fabrication and performance in line with our sensitivity requirements, we will perform in-lab optical tests on isolated SO detectors as well as full detector arrays. The tests include beam measurements, bandpass measurements, and polarization measurements, among others. Here, we will describe the development of a cryogenic testbed that enables optical characterization of SO's detectors. We include the infrared filtering strategy to allow suitable cryogenic performance, design and implementation of the test equipment used in characterization, and the preliminary results from our validation of the testbed's cryo-optical performance...
Multichroic dual-polarization bolometric detectors for studies of the cosmic microwave background
No full textWe are developing multi-chroic antenna-coupled Transition Edge Sensor (TES) focal planes for Cosmic Microwave Background (CMB) polarimetry. In each pixel, a dual polarized sinuous antenna collects light over a two-octave frequency band. Each antenna couples to the telescope with a contacting silicon lens. The antenna couples the broadband RF signal to microstrip transmission lines, and then filter banks split the broadband signal into several frequency bands. A TES bolometer detects the power in each band and polarization. We will describe the design of
this device and demonstrate its performance with optical data measured using prototype pixels. Our measurements show low ellipticity beams, low cross-polarization, and properly partitioned bands in banks of 2, 3, and 7 filters. Finally, we will describe how we will upgrade the POLARBEAR CMB experiment using the focal planes of these detectors to increase the experiment’s mapping speed and its ability to discriminate between the CMB and polarized foregrounds
Data acquisition and management system for the CMB polarization experiment: Simons Array
No full textA Measurement of Atmospheric Circular Polarization with POLARBEAR
No full textInternational audienceAt millimeter wavelengths, the atmospheric emission is circularly polarized owing to the Zeeman splitting of molecular oxygen by the Earth's magnetic field. We report a measurement of the signal in the 150 GHz band using 3 yr of observational data with the Polarbear project. Nonidealities of a continuously rotating half-wave plate (HWP) partially convert circularly polarized light to linearly polarized light. While Polarbear detectors are sensitive to linear polarization, this effect makes them sensitive to circular polarization. Although this was not the intended use, we utilized this conversion to measure circular polarization. We reconstruct the azimuthal gradient of the circular polarization signal and measure its dependency from the scanning direction and the detector bandpass. We compare the signal with a simulation based on atmospheric emission theory, the detector bandpass, and the HWP leakage spectrum model. We find the ratio of the observed azimuthal slope to the simulated slope is 0.92 ± 0.01(stat) ± 0.07(sys). This ratio corresponds to a brightness temperature of 3.8 mK at the effective band center of 121.8 GHz and bandwidth of 3.5 GHz estimated from representative detector bandpass and the spectrum of Zeeman emission. This result validates our understanding of the instrument and reinforces the feasibility of measuring the circular polarization using the imperfection of continuously rotating HWP. Continuously rotating HWP is popular in ongoing and future cosmic microwave background experiments to modulate the polarized signal. This work shows a method for signal extraction and leakage subtraction that can help measure circular polarization in such experiments
Performance of a continuously rotating half-wave plate on the POLARBEAR telescope
No full textInternational audienceA continuously rotating half-wave plate (CRHWP) is a promising tool to improve the sensitivity to large angular scales in cosmic microwave background (CMB) polarization measurements. With a CRHWP, single detectors can measure three of the Stokes parameters, I, Q and U, thereby avoiding the set of systematic errors that can be introduced by mismatches in the properties of orthogonal detector pairs. We focus on the implementation of CRHWPs in large aperture telescopes (i.e. the primary mirror is larger than the current maximum half-wave plate diameter of ~0.5 m), where the CRHWP can be placed between the primary mirror and focal plane. In this configuration, one needs to address the intensity to polarization (I→P) leakage of the optics, which becomes a source of 1/f noise and also causes differential gain systematics that arise from CMB temperature fluctuations. In this paper, we present the performance of a CRHWP installed in the {\scshape Polarbear} experiment, which employs a Gregorian telescope with a 2.5 m primary illumination pattern. The CRHWP is placed near the prime focus between the primary and secondary mirrors. We find that the I→P leakage is larger than the expectation from the physical properties of our primary mirror, resulting in a 1/f knee of 100 mHz. The excess leakage could be due to imperfections in the detector system, i.e. detector non-linearity in the responsivity and time-constant. We demonstrate, however, that by subtracting the leakage correlated with the intensity signal, the 1/f noise knee frequency is reduced to 32 mHz (ℓ ~ 39 for our scan strategy), which is very promising to probe the primordial B-mode signal. We also discuss methods for further noise subtraction in future projects where the precise temperature control of instrumental components and the leakage reduction will play a key role
