1,720,955 research outputs found
Unconventional Arrays for 3D Electrical Resistivity and Induced Polarization Tomography to Detect Leachate Concentration in a Waste Landfill
Full text linkIn recent times, 3D electrical resistivity and induced polarization tomographies are being used more frequently. However, it is often not possible to have regular grids of electrodes due to irregular topography, difficulty accessing urbanized or industrialized places, and other environmental and health problems. In these cases, the use of unconventional arrays is necessary, arranging the electrodes around the inaccessible area according to one or more open or closed polygonal traces. In this work, three different perimeter arrangements of electrodes are considered, and, for each, three different electrode array configurations are tested by calculating their apparent resistivity and solving the inverse problem on a three-dimensional model with resistive and conductive blocks. The comparison of the results showed that the dataset that produces the most realistic inverse model consists of electrodes arranged in concentric squares and the use of the Full Range Gradient (FRG) Array. This combination was evaluated in the field on a waste landfill, in which electrical resistivity and induced polarization tomographies were carried out, exploiting the access paths to the various sectors of the landfill to arrange the electrodes on approximately concentric polygons. The 3D models of electrical resistivity and induced polarization allowed the detection of zones of high concentration of leachate, defining their extension, and monitoring the functioning of the waterproofing membrane at the bottom of the landfill. The results proved that when it is not possible to arrange a regular grid of electrodes, the use of perimeter disposals of electrode joined to the FRG array provide a sufficiently homogeneous resolution below the area to be investigated
Seismic Investigation for the Characterization of a Gravity Concrete Dam
No full textMonitoring of large-scale infrastructures plays an important role for public safety and prevention. The control of the safety assessment of a dam is largely dependent on knowledge of the mechanical parameters of the actual construction, as well as its geological substratum. The application of geophysical methods can considerably contribute to the examination indicating the less consolidated material and the degradation of mechanical parameters. A seismic tomographic approach has been used in a typical gravity concrete dam without reinforcement to detect mechanical properties of the body of the dam and its geological setting. Three seismic travel time tomographies in the dam body as well as S-wave velocity values obtained by a down hole testify that the dam is composed of high quality concrete. Small variations on the P-wave velocities seem to be the effect of moisture and infiltration. In addition seismic surveys in the surrounding grounds of the dam confirmed the expected properties of the foundation terrain
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Application of non-invasive seismic techniques for the characterisation of a gravity concrete dam
No full textThe use of non-invasive investigation methods is becoming frequent as a support for the monitoring of water reservoirs and for the management of dam safety. In this context, geophysical techniques are much less invasive than geotechnical tests and allow to obtain two-dimensional or three-dimensional representations of the mechanical parameters of an engineering structure. A case of application of constrained inversion and joint interpretations of non-invasive seismic techniques is discussed, in order to monitor the Dirillo gravity concrete dam, in Sicily. To investigate the foundation soil, a stratigraphic borehole and a vertical seismic profile, carried out in the same hole, were used to constrain the inversion of a MASW. This latter allowed to generate the starting model for a seismic refraction tomography. The results of the seismic surveys on the ground surrounding the dam allowed a detailed seismic characterisation the foundation soil. Furthermore, for the characterisation of the concrete of the dam, a vertical seismic profile was acquired, using a vertical inspection duct in the dam body, and three seismic refraction tomographies were performed placing sources and receivers on the two opposite walls of the dam. Also in this case the tomographic inversions were constrained by the P wave velocity values obtained from the vertical seismic profile. 2D representations of P wave velocity and the trend with depth of S wave velocity and Poisson ratio allowed an accurate reconstruction of the state of the concrete conservation of the dam. The high velocity values of the P and S waves, together with normal values of the Poisson ratio, suggest that the concrete is still of good quality and local decreases in the P wave velocity are due to moisture and infiltrations. The results obtained confirm the efficacy of seismic refraction tomography, if appropriately constrained, for the characterisation and validation of concrete in large-scale infrastructures that are difficultly investigable using direct methods
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
