1,721,398 research outputs found
Review of microstructures and properties of zinc alloys
Full text linkAccording to market data, about 15% of world zinc consumption is devoted to the production of zinc-base alloys that are used for manufacturing automotive parts, electronic/electrical systems and also, water taps and sanitary fittings, household articles, fashion goods, etc. These alloys are characterized by low melting points and high fluidity that make them suitable for foundry applications. Typically, they are processed by hot chamber high-pressure die-casting where can be cast to thicknesses as low as 0.13 mm. The die-cast zinc alloys possess an attractive combination of mechanical properties, permitting them to be applied in a wide variety of functional applications. However, depending on the alloying elements and purposes, some zinc alloys can be processed also by cold chamber die-casting, gravity, or sand casting as well as spin casting and slush casting. In this paper, a detailed overview of the current knowledge in the relationships between processing, microstructure and mechanical properties of zinc-base alloys will be described. In detail, the evolution of the microstructure, the dimensional stability and aging phenomena are described. Furthermore, a thorough discussion on mechanical properties, as such as hardness, tensile, creep, and wear properties of zinc-base alloys is presented
Corrosion Resistance of 3D-Printed and Conventional Die Steels in Contact with Molten Aluminum Alloys
No full textThis study investigates the corrosion resistance of maraging steel produced via additive manufacturing and conventional forging when exposed to molten aluminum alloys used in high-pressure die casting (HPDC). The H11 tool steel, typically used in such applications, was also studied for comparison. Static immersion tests were conducted in three different aluminum alloys for HPDC (AlSi7Mg, AlSi10Mg, AlSi10MgFe). SEM-EDS analysis revealed differences in the formation of intermetallic layers on the metallic surfaces, mainly depending on the material considered. The laser-power bed fused maraging steel, often used for conformal cooling inserts, exhibited the formation of a stable high Fe intermetallic layer without a liquid phase, contributing to superior corrosion resistance compared to the forged maraging steel. The H11 tool steel demonstrated the highest corrosion resistance, especially due to its composition free from Ni and the presence of Cr and Cr-carbide. Thermo-Calc equilibrium simulations identified the phases present in the intermetallic layers at the test temperature, highlighting the effects of different steel compositions on interfacial intermetallic layers. These findings underline the critical role of manufacturing processes and alloy composition on the performance of steels in contact with molten aluminum alloys, with implications for die casting applications
Study of high temperature properties of AlSi10Mg alloy produced by laser-based powder bed fusion
No full textAdditive manufacturing of Al alloys can represent an interesting solution for highperformance components in various industrial fields, as for instance the automotive and aerospace industry. Often, for these applications, the alloys are required to withstand exposure to high temperatures. Therefore, the investigation of the evolution of material properties with increasing temperature is of utmost importance in order to assess their suitability for this kind of applications. In the present study, tensile properties at high temperature were investigated for an AlSi10Mg alloy. Samples were manufactured by laser-based powder bed fusion in horizontal and vertical direction in order to examine the influence of building direction on material behavior. The samples were tested in as-built condition and after exposure to high temperature. Tensile tests were performed up to 150 °C and the effect of holding time at the test temperature was evaluated. Furthermore, the alloy was characterized by mechanical spectroscopy in order to evaluate the behavior of dynamic modulus with temperature and, thus, to provide a comprehensive characterization of the material behavior. It was found that the peculiar microstructure of the alloy produced by additive manufacturing is responsible for good high-temperature strength of the material up to 150 °C. The material also exhibits a good thermal stability even after holding at test temperature for 10 h
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Mechanical spectroscopy study of as-cast and additive manufactured AlSi10Mg
Full text linkThe AlSi10Mg alloy produced by casting (AC) and additive manufacturing (AM) technology of laser powder bed fusion (L-PBF) has been investigated through mechanical spectroscopy (MS). In addition to the grain boundary peak PGB the Q−1 curves of both materials exhibit two other relaxation peaks, P1 (H = 0.8 ± 0.05 eV; τ0 = 10−11±1 s) and P2 (H = 1.0 ± 0.05 eV; τ0 = 10−13±1 s), depending on the interaction of dislocations with solute elements (Si and Mg). Relaxation strengths of P1, P2 and PGB of AM alloy are greater than those of the AC one owing to the finer structure of Al cells and the higher amount of Si and Mg in supersaturated solid solution induced by the rapid solidification typical of the L-PBF process. After successive MS test runs relaxation strengths of P1 and P2 peaks in both the examined materials decrease due to the precipitation of Si atoms and dislocation density recovery. Such decrease is more pronounced in AM alloy where change of cell shape and increase of cell size is observed. Dynamic modulus of AM alloy exhibits an anomalous trend in the first test run that is no more present in successive runs. The irreversible process giving rise to such anomalous behavior is the closure of pores of nanometric size
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
- …
