1,720,974 research outputs found
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Micro- et nanostructure des revêtements (Ti, Al)N et comportement tribologique au voisinage de la transition structurale
No full textTi1-xAlxN (0 ≤ x ≤ 1) is considered as a model system, where TiN (fcc) and AlN (hcp) do not mix over the whole composition range due to their low miscibility. However, the physical vapour deposition (PVD) allows achieving metastable phases of Ti1-xAlxN, where Al atoms are partially substituting for Ti in fcc lattice. Ti1-xAlxN coatings exhibit high hardness and oxidation resistance for the maximum Al substituted to Ti in fcc lattice (about x=0.6). The proportion of grain boundaries and the limit solubility play a major role on the mechanical properties and resistance to wear of the coatings. Several techniques are employed to investigate two sets of Ti1-xAlxN thin films deposited by magnetron reactive sputtering from two types of metallic targets onto Si (100). Lattice symmetry of crystallised domains and columnar growth structure of the films are characterized by X-ray diffraction (XRD) and electron microscopy (TEM, HRTEM). Several local probes such as X-ray absorption fine structure (XAFS), diffraction anomalous fine structure (DAFS) and Electron Energy Loss Spectroscopies (EELS) which are very sensitive to the symmetry of the atomic sites either octahedral for fcc lattice or tetrahedral for hcp one are carried out. For Ti-rich films (x 0.7) have a domain growth well crystallized in the direction [002]h the hexagonal lattice. In addition, the cubic / hexagonal transition in Al contents higher is observed for films from sintered target. These films show better wear resistance than those deposited from target compartmentalized.Les films de nitrures métalliques nanostructurés sont généralement utilisés comme revêtements protecteurs. Ti1-xAlxN (0 ≤ x ≤ 1) peut être considéré comme un système modèle, où TiN (cubique) et AIN (hexagonal) sont partiellement miscibles. L’élaboration par dépôt physique en phase vapeur donne au film une microstructure colonnaire complexe composée de phase métastable pouvant cohabiter avec des précipités localisés aux joints de grains. Une haute dureté et une grande résistance à l’oxydation sont observées pour un maximum d’atomes de Ti substitué par des atomes de Al en réseau cubique. Les conditions de dépôt et la composition jouent un rôle majeur sur la substitution des éléments métalliques (Ti ,Al). Nous avons préparé deux séries de films déposés par pulvérisation cathodique magnétron réactive à partir de cibles TiAl compartimentées et frittées. La micro- et nanostructure des films ont été analysées par Diffraction, Spectroscopie d’Absorption des rayons X et Microscopie Electronique à Transmission. L’usure des revêtements a été étudiée par microtribologie. Nous observons pour les films riches en Ti (x 0,7) présentent une croissance de domaines bien cristallisés suivant la direction [002]h du réseau hexagonal. De plus, nous avons mis en évidence l’apparition de la transition cubique / hexagonal à des teneurs en Al plus élevée pour les films issus de cible frittée. Ces films montrent une meilleure résistance à la fissuration et à l’usure que ceux déposés à partir de cible compartimentées
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Micro- and nanostructure of Ti1-xAlxN thin films and wear close to the structural transition (fcc/hcp)
No full textLes films de nitrures métalliques nanostructurés sont généralement utilisés comme revêtements protecteurs. Ti1-xAlxN (0 ≤ x ≤ 1) peut être considéré comme un système modèle, où TiN (cubique) et AIN (hexagonal) sont partiellement miscibles. L’élaboration par dépôt physique en phase vapeur donne au film une microstructure colonnaire complexe composée de phase métastable pouvant cohabiter avec des précipités localisés aux joints de grains. Une haute dureté et une grande résistance à l’oxydation sont observées pour un maximum d’atomes de Ti substitué par des atomes de Al en réseau cubique. Les conditions de dépôt et la composition jouent un rôle majeur sur la substitution des éléments métalliques (Ti ,Al). Nous avons préparé deux séries de films déposés par pulvérisation cathodique magnétron réactive à partir de cibles TiAl compartimentées et frittées. La micro- et nanostructure des films ont été analysées par Diffraction, Spectroscopie d’Absorption des rayons X et Microscopie Electronique à Transmission. L’usure des revêtements a été étudiée par microtribologie. Nous observons pour les films riches en Ti (x 0,7) présentent une croissance de domaines bien cristallisés suivant la direction [002]h du réseau hexagonal. De plus, nous avons mis en évidence l’apparition de la transition cubique / hexagonal à des teneurs en Al plus élevée pour les films issus de cible frittée. Ces films montrent une meilleure résistance à la fissuration et à l’usure que ceux déposés à partir de cible compartimentées.Ti1-xAlxN (0 ≤ x ≤ 1) is considered as a model system, where TiN (fcc) and AlN (hcp) do not mix over the whole composition range due to their low miscibility. However, the physical vapour deposition (PVD) allows achieving metastable phases of Ti1-xAlxN, where Al atoms are partially substituting for Ti in fcc lattice. Ti1-xAlxN coatings exhibit high hardness and oxidation resistance for the maximum Al substituted to Ti in fcc lattice (about x=0.6). The proportion of grain boundaries and the limit solubility play a major role on the mechanical properties and resistance to wear of the coatings. Several techniques are employed to investigate two sets of Ti1-xAlxN thin films deposited by magnetron reactive sputtering from two types of metallic targets onto Si (100). Lattice symmetry of crystallised domains and columnar growth structure of the films are characterized by X-ray diffraction (XRD) and electron microscopy (TEM, HRTEM). Several local probes such as X-ray absorption fine structure (XAFS), diffraction anomalous fine structure (DAFS) and Electron Energy Loss Spectroscopies (EELS) which are very sensitive to the symmetry of the atomic sites either octahedral for fcc lattice or tetrahedral for hcp one are carried out. For Ti-rich films (x 0.7) have a domain growth well crystallized in the direction [002]h the hexagonal lattice. In addition, the cubic / hexagonal transition in Al contents higher is observed for films from sintered target. These films show better wear resistance than those deposited from target compartmentalized
Micro- et nanostructure des revêtements (Ti, Al)N et comportement tribologique au voisinage de la transition structurale
Full text linkTi1-xAlxN (0 ≤ x ≤ 1) is considered as a model system, where TiN (fcc) and AlN (hcp) do not mix over the whole composition range due to their low miscibility. However, the physical vapour deposition (PVD) allows achieving metastable phases of Ti1-xAlxN, where Al atoms are partially substituting for Ti in fcc lattice. Ti1-xAlxN coatings exhibit high hardness and oxidation resistance for the maximum Al substituted to Ti in fcc lattice (about x=0.6). The proportion of grain boundaries and the limit solubility play a major role on the mechanical properties and resistance to wear of the coatings. Several techniques are employed to investigate two sets of Ti1-xAlxN thin films deposited by magnetron reactive sputtering from two types of metallic targets onto Si (100). Lattice symmetry of crystallised domains and columnar growth structure of the films are characterized by X-ray diffraction (XRD) and electron microscopy (TEM, HRTEM). Several local probes such as X-ray absorption fine structure (XAFS), diffraction anomalous fine structure (DAFS) and Electron Energy Loss Spectroscopies (EELS) which are very sensitive to the symmetry of the atomic sites either octahedral for fcc lattice or tetrahedral for hcp one are carried out. For Ti-rich films (x 0.7) have a domain growth well crystallized in the direction [002]h the hexagonal lattice. In addition, the cubic / hexagonal transition in Al contents higher is observed for films from sintered target. These films show better wear resistance than those deposited from target compartmentalized.Les films de nitrures métalliques nanostructurés sont généralement utilisés comme revêtements protecteurs. Ti1-xAlxN (0 ≤ x ≤ 1) peut être considéré comme un système modèle, où TiN (cubique) et AIN (hexagonal) sont partiellement miscibles. L’élaboration par dépôt physique en phase vapeur donne au film une microstructure colonnaire complexe composée de phase métastable pouvant cohabiter avec des précipités localisés aux joints de grains. Une haute dureté et une grande résistance à l’oxydation sont observées pour un maximum d’atomes de Ti substitué par des atomes de Al en réseau cubique. Les conditions de dépôt et la composition jouent un rôle majeur sur la substitution des éléments métalliques (Ti ,Al). Nous avons préparé deux séries de films déposés par pulvérisation cathodique magnétron réactive à partir de cibles TiAl compartimentées et frittées. La micro- et nanostructure des films ont été analysées par Diffraction, Spectroscopie d’Absorption des rayons X et Microscopie Electronique à Transmission. L’usure des revêtements a été étudiée par microtribologie. Nous observons pour les films riches en Ti (x 0,7) présentent une croissance de domaines bien cristallisés suivant la direction [002]h du réseau hexagonal. De plus, nous avons mis en évidence l’apparition de la transition cubique / hexagonal à des teneurs en Al plus élevée pour les films issus de cible frittée. Ces films montrent une meilleure résistance à la fissuration et à l’usure que ceux déposés à partir de cible compartimentées
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
