21,950 research outputs found
Multiscale X-Ray Analysis of Biological Cells and Tissues by Scanning Diffraction and Coherent Imaging
The past 70 years of muscle research have profoundly shaped our current understanding of the structure and function of muscle. X-ray diffraction became a key method in its structural analysis and yielded valuable insights into the molecular arrangement of the contraction apparatus. This work employs an extension of the X-ray diffraction methodology, scanning X-ray diffraction, for structural imaging of biological cells and tissue. With this technique periodicites in a structure on the order of several nanometers can be detected and, by raster scanning of the X-ray beam over the sample, images of the nano-structure can be computed. This makes it an ideal method to study e.g. local changes in the usually highly conserved distance between the myosin filaments in muscle cells. This work shows how such experiments can contribute to the understanding of cardiac tissue architecture and in particular to the development of the contraction apparatus of cardiac muscle cells upon cell maturation. This thesis also covers the fruitful combination of scanning X-ray diffraction and X-ray fluorescence microscopy in Parkinson-related biomedical research. While e.g. scanning X-ray diffraction was used to image the lamellar periodicity of the myelin sheath in brain tissue sections, by X-ray fluorescence microscopy we could verify a dishomeostasis of common trace elements in substantia nigra neurons due to Parkinson’s disease. To obtain a more complete picture of the complex, often very hierarchical, structure of biological cells and tissues, holographic X-ray imaging can be used. The holographic approach is used to directly image the electron density of the sample and greatly extends the resolution range covered in a scanning X-ray diffraction experiment. Due to its adjunct contrast, low dose requirement and experimental compatibility, holographic imaging can be advantageously paired with scanning X-ray diffraction. This work shows that, in combination, the two methods can cover three orders of magnitude in resolution, from approximately 10 nm to 10 μm. Lastly, an example is given where holographic imaging could be used to visualize barium aggregates in macrophages, not only in two- but also in three dimensions. To stabilize the macrophages for the holographic recording, the barium-loaded cells were trapped in an optical stretcher
[Letter from Alex Bradford to Lieutenant and Mrs. Ray Starner - November 4, 1940]
Letter from Alex Bradford to Lieutenant and Mrs. Ray Starner describing the the current state of affairs that the author was experiencing, including: the London blitz, the moral of the troops on the ground, and the collective company of men opposing the Nazi regime
Recommended from our members
Enhanced colour encoding of materials discrimination information for multiple view dual-energy x-ray imaging
This thesis reports an investigation into dual-energy X-ray discrimination techniques. These techniques are designed to provide colour-coded materials discrimination information in a sequence of perspective images exhibiting sequential parallax. The methods developed are combined with a novel 3D imaging technique employing depth from motion or kinetic depth effect (KDE). This technique when applied to X-ray images is termed KDEX imaging and was developed previously by the university team for luggage screening applications at security checkpoints. A primary motivation for this research is that the dual-energy X-ray techniques, which are routinely incorporated into ‘standard’ 2D luggage scanners, provide relatively crude materials discrimination information. In this work it was critical that robust materials discrimination and colour encoding process was implemented as the sequential parallax exhibited by the KDEX imagery may introduce colour changes, due to the different X-ray beam paths associated with each perspective image. Any introduction of ‘colour noise’ into the resultant image sequences could affect the perception of depth and hinder the ongoing assessment of the potential utility of the dual-energy KDEX technique. Two dual-energy discrimination methods have been developed, termed K-II and W-E respectively. Employing the total amount of attenuation measured at each energy level and the weight fraction of layered structures, a combination of the K-II and the W-E techniques enables the computation and extraction of a target objects’ effective atomic number (Zeff) and its surface density (ρS) in the presence of masking layers
The student's guide to completing an author study
The 'Student's guide to completing an author study' emerged during the early development of the school library resource center program at Glen Stewart Elementary School in Stratford Canada on Prince Edward Island. This research process centered on an author study, with direct teaching and clear assignment. The resulting model has been adapted to various grade levels and subject areas in different schools.Source type: Electronic(1)http://proquest.umi.com/pqdweb?did=49237063&Fmt=7&clientId=65345&RQT=309&VName=PQ
Active X-ray optics for the next generation of X-ray space telescopes
Described within is the design, manufacture, metrology and X-ray testing of an active X-ray
prototype intended for the next generation of X-ray telescopes. One of the challenges faced by
the X-ray telescope community is how to combine high resolution and high sensitivity into one
system, as weight limitations place constraints on the optics that can be launched. Therefore the
mandate of the active X-ray prototype is to provide high sensitivity through the ability of the optics
to be nested and to deliver high angular resolution through the active control of the optic’s form.
Piezoelectric unimorph actuators provide the active component: it is intended that they will correct
for figure errors within the optic and therefore increase the angular resolution capability.
The prototype’s design is based upon an ellipsoidal segment which provides point-to-point
focussing of an X-ray source. The prototype itself is composed of an electroformed nickel optic
where the non-reflective surface is populated with 30 piezoelectric actuators and it is the production
of the prototype that is the core of the presented research. Metrology of the actuators’ influence
functions is presented and highlight the prototype’s ability to deform its optic surface by microns.
In addition, the measured influence functions are compared against finite element models and a
distinct similarity between the functions is observed.
The prototype was tested at an X-ray beamline facility in November 2008 and the results
showed the prototype’s ability to correct the optic to achieve an improved angular resolution: from
0.786 arc-minutes to 0.686 arc-minutes in terms of full width half maximum. Finally, difficulties
in the manufacture of the prototype and X-ray testing shall be presented alongside future work in
conclusion to this thesis
Snakebite vulnerability analysis and optimization of access to health in the Terai region of Nepal
This data includes four sets of geospatial rasters resulting from travel time and vulnerability analysis of the Terai region of Nepal for multiple scenarios, as described in the original publication. Additionally, the ReadMe.txt file provides extra information on the characteristics of the files
Author, Geraldine Brooks at the National Library of Australia for the 2009 Ray Mathew Lecture, Canberra, 23 October 2009 [picture] /
Title from acquisitions documentation.; Part of the collection: Portraits of author, Geraldine Brooks during her visit to the National Library of Australia for the 2009 Ray Mathew Lecture, Canberra, 23 October 2009.; Acquired in digital format; access copy available online.; Mode of access: Internet via World Wide Web.; Photographed by a staff member of the National Library of Australia
X-ray Cluster Cosmology
Formation of dark matter halos is sensitive to the expansion rate of the Universe and to the growth of structures under gravitational collapse. Virialization of halos heats the gaseous intra-cluster medium to high temperatures, leading to copious emission of photons at X-ray wavelengths. We summarize the progress of X-ray surveys in determining cosmology using galaxy clusters.We review recent cosmological results based on cluster volume abundance, clustering, standard candles, extreme object statistics, and present relevant theoretical considerations. We discuss clusters as gravitation theory probes and present an outlook on future developments.Peer reviewe
A 2 h periodic variation in the low-mass X-ray binary Ser X-1
Spectroscopy of the low-mass X-ray binary Ser X-1 using the Gran Telescopio Canarias have revealed a ?2 h periodic variability that is present in the three strongest emission lines. We tentatively interpret this variability as due to orbital motion, making it the first indication of the orbital period of Ser X-1. Together with the fact that the emission lines are remarkably narrow, but still resolved, we show that a main-sequence K dwarf together with a canonical 1.4 M? neutron star gives a good description of the system. In this scenario, the most likely place for the emission lines to arise is the accretion disc, instead of a localized region in the binary (such as the irradiated surface or the stream-impact point), and their narrowness is due instead to the low inclination (?10°) of Ser X-1
X-ray polarization in relativistic jets
We investigate the polarization properties of Comptonized X-rays from relativistic jets in active galactic nuclei (AGN) using Monte Carlo simulations. We consider three scenarios commonly proposed for the observed X-ray emission in AGN: Compton scattering of blackbody photons emitted from an accretion disc; scattering of cosmic microwave background (CMB) photons and self-Comptonization of intrinsically polarized synchrotron photons emitted by jet electrons. Our simulations show that for Comptonization of disc and CMB photons, the degree of polarization of the scattered photons increases with the viewing inclination angle with respect to the jet axis. In both cases, the maximum linear polarization is ≈20 per cent. In the case of synchrotron self-Comptonization (SSC), we find that the resulting X-ray polarization depends strongly on the seed synchrotron photon injection site, with typical fractional polarizations P≈ 10–20 per cent when synchrotron emission is localized near the jet base, while P≈ 20–70 per cent for the case of uniform emission throughout the jet. These results indicate that X-ray polarimetry may be capable of providing unique clues to identify the location of particle acceleration sites in relativistic jets. In particular, if synchrotron photons are emitted quasi-uniformly throughout a jet, then the observed degree of X-ray polarization may be sufficiently different for each of the competing X-ray emission mechanisms (synchrotron, SSC or external Comptonization) to determine which is the dominant process. However, X-ray polarimetry alone is unlikely to be able to distinguish between disc and CMB Comptonization
- …
