169,955 research outputs found
Going Beyond Counting First Authors in Author Co-citation Analysis
No full textThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Mitomycin C in highly myopic eyes - Author reply
No full textOphthalmology. 2005 Feb;112(2):208-18; discussion 219.
Mitomycin C modulation of corneal wound healing after photorefractive keratectomy in highly myopic eyes.
Gambato C, Ghirlando A, Moretto E, Busato F, Midena E.
SourceRefractive Surgery Service and Antimetabolite Therapy Research Unit, Department of Ophthalmology, University of Padova, Padova, Italy.
Abstract
PURPOSE: To evaluate the role of topical mitomycin C in corneal wound healing (CWH) after photorefractive keratectomy (PRK) in highly myopic eyes.
DESIGN: Prospective, double-masked, randomized clinical trial.
PARTICIPANTS: Seventy-two eyes of 36 patients affected by high (>7 diopters) myopia.
METHODS: In each patient, one eye was randomly assigned to PRK with intraoperative topical 0.02% mitomycin C application, and the fellow eye was treated with a placebo. Postoperatively, mitomycin C-treated eyes received artificial tears (3 times daily, tapered in 3 months), whereas the fellow eye was treated with fluorometholone sodium 2% and artificial tears (3 times daily, tapered in 3 months).
MAIN OUTCOME MEASURES: Uncorrected visual acuity (UCVA) and best-corrected visual acuity (BCVA), contrast sensitivity, manifest refraction, and biomicroscopy. Contrast sensitivity was determined using the Pelli-Robson chart. Corneal confocal microscopy documented CWH.
RESULTS: Mean follow-up was 18 months (range, 12-36). No side effects or toxic effects were documented. At 12-month follow-up examination, UCVAs (logarithm of the minimum angle of resolution) were 0.4+/-0.48 and 0.5+/-0.53 (P = .03) in mitomycin C-treated eyes and corticosteroid-treated eyes, respectively. At 1 year, corneal haze developed in 20% of corticosteroid-treated eyes, versus 0% of mitomycin C-treated eyes. At 12, 24, and 36 months, corneal confocal microscopy showed activated keratocytes and extracellular matrix significantly more evident in untreated eyes (Ps = 0.004, 0.024, and 0.046, respectively).
CONCLUSION: Topical intraoperative application of 0.02% mitomycin C can reduce haze formation in highly myopic eyes undergoing PRK.
Comment in
Ophthalmology. 2006 Feb;113(2):357; author reply 357-8
Dispelling the Myths Behind First-author Citation Counts
No full textWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
A Multi-Language Comparison of Influences on Author Verification using Character N-Grams
No full textWe create a new multi-language corpus for author verification based on Wikipedia talkpages, and evaluate the influence that differences in topic and time have on character n-gram author profiles. Topic alignment between two texts is found to increase author verification precision, and an authors writing style is found to change over time, but not more significantly after 3 years than after 1 year.Information ArchitectureWISElectrical Engineering, Mathematics and Computer Scienc
A 0.12mm<sup>2</sup> Wien-Bridge Temperature Sensor with 0.1°C (3σ) Inaccuracy from -40°C to 180°C
No full text Resistor-based temperature sensors can achieve much higher resolution and energy efficiency than conventional BJT-based sensors [1], but they typically occupy more area (> 0.25 mm 2 ) and have lower operating temperatures (le 125 {circ} {C}) [2]-[4]. This work describes a 0.12mm 2 resistor-based sensor that uses a Wien-bridge (WB) filter to achieve 0.1 {circ} {C} (3 sigma) inaccuracy from - 40 {circ} {C} to 180 {circ} {C}. Compared to a state-of-the-art WB sensor [4], it occupies 6 × less area and achieves comparable relative accuracy over a 76% wider operating range. Session 10.3 Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic InstrumentationMicroelectronic
A ±25A Versatile Shunt-Based Current Sensor with 10kHz Bandwidth and ±0.25% Gain Error from -40°C to 85°C Using 2-Current Calibration
No full textAccurate current sensing is critical in many industrial applications, such as battery management and motor control. Precise shunt-based current sensors have been reported with gain errors of less than 1% over the industrial temperature range (-40°C to 85°C) [1]–[4]. However, since they are intended for coulomb counting, their bandwidth is limited to a few tens of Hz, making them unsuitable for battery impedance or motor-current sensing. This paper presents a current sensor with a wide (10kHz) bandwidth and a tunable temperature compensation scheme (TCS), which allows it to be flexibly used with different types of shunts while maintaining high accuracy. A low-cost room-temperature calibration scheme is proposed to optimize gain flatness over temperature by exploiting the shunt's self-heating at large currents. Over the industrial temperature range and a ±25A current range, it achieves state-of-the-art gain error (±0.25%) with both low-cost PCB and stable metal-alloy shunts.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic InstrumentationMicroelectronic
Energy-efficient NO2 sensors based on two-dimensional layered 2H-WS2 nanosheets
No full textLayered transition metal dichalcogenides (TMDCs) are considered among the next-generation materials for gas sensing. Here, we report exfoliated 2 H-WS2 nanosheets for the fabrication of highly performing NO2 sensors. Thermal annealing at several temperatures was performed to investigate the oxidation of WS2. The long-term stability of 2 H-WS2 bulk was verified. Using droplet variation method, three batches of conductometric sensors from 2 H-WS2 dispersions were fabricated on electrical transducers, namely two layers (2 L), five layers (5 L) and ten layers (10 L) WS2 nanosheets. These sensors were tested towards low NO2 concentrations at different temperatures (Room Temperature (20 °C), 50 °C and 100 °C) and relative humidity (RH) levels (20%, 40%, 60%, 80% and 90% RH). 2 L-WS2 based sensor showed the highest response at room temperature (RT). Excellent repeatability (4 cycles) towards 1 ppm NO2 and long-term stability (more than two months) were achieved. Full selectivity towards NO2 (1 ppm) at RT was observed over NH3 (15 ppm), H2S (15 ppm), ethanol (30 ppm) and acetone (30 ppm). Our results confirm that low-power consumption devices with high sensitivity (even at high RH), long-term stability and excellent selectivity towards NO2 were fabricated using 2 H-WS2 nanosheets
Wear behavior characterization of hydrogels constructs for cartilage tissue replacement
No full textThis paper aims to characterize the wear behavior of hydrogel constructs designed for human articular cartilage replacement. To this purpose, poly (ethylene glycol) diacrylate (PEGDA) 10% w/v and gellan gum (GG) 1.5% w/v were used to reproduce the superior (SUP) cartilage layer and PEGDA 15% w/v and GG 1.5% w/v were used to reproduce the deep (DEEP) cartilage layer, with or without graphene oxide (GO). These materials (SUP and DEEP) were analyzed alone and in combination to mimic the zonal architecture of human articular cartilage. The developed constructs were tested using a four-station displacement control knee joint simulator under bovine calf serum. Roughness and micro-computer tomography (μ-CT) measurements evidenced that the hydrogels with 10% w/v of PEGDA showed a worse behavior both in terms of roughness increase and loss of uniformly distributed density than 15% w/v of PEGDA. The simultaneous presence of GO and 15% w/v PEGDA contributed to keeping the hydrogel construct’s characteristics. The Raman spectra of the control samples showed the presence of unreacted C=C bonds in all the hydrogels. The degree of crosslinking increased along the series SUP < DEEP + SUP < DEEP without GO. The Raman spectra of the tested hydrogels showed the loss of diacrylate groups in all the samples, due to the washout of unreacted PEGDA in bovine calf serum aqueous environment. The loss decreased along the series SUP > DEEP + SUP > DEEP, further confirming that the degree of photo-crosslinking of the starting materials plays a key role in determining their wear behavior. μ-CT and Raman spectroscopy proved to be suitable techniques to characterize the structure and composition of hydrogels
An Article About Albertus C. Van Raalte, Author Unknown, Except for Parts Taken from an Article by Anna C. Post
No full textAn article about Albertus C. Van Raalte, author unknown, except for parts taken from an article by Anna C. Post. The author knew first generation persons in the Holland settlement and therefore, the article has some value.https://digitalcommons.hope.edu/vrp_1890s/1012/thumbnail.jp
Archivist, Archaeologist, Author and the Tactile Window
No full textThe idea that the predominant way of engaging with architecture is through vision is not uncommon but also not always the most appropriate given that buildings are also experienced through tactile interventions. This consequence that emphasises visual aesthetics in order to appreciate and understand architecture probably has much to do with the assumed but rather vaguely defined role of the architect as designer in the practice of architectural design. A resulting misapprehension is that architects designing for visual appreciation think that they are actually designing physical space for embodied tactile engagement.
This prioritisation of vision in the way architects think about and approach design is questioned through the design project of the Tactile Window in which the position of the architect is redefined through inhabiting the roles of archivist, archaeologist and author during the design process.
A 16th century portrait of Queen Elizabeth I known as the Ditchley portrait, currently on display at the National Portrait Gallery is used as the source from which the design of the Tactile Window is derived from and refers back to. Questioning the validity of vision as the sole means of engaging with the work, information about the portrait and working methods gathered from the three carefully chosen positions mentioned above are drawn on and applied to the making of this Tactile Window that becomes an alternative Ditchley portrait. Through exploring the hidden historical and current narratives of and in the existing portrait, the presence of the portrait is alluded to on an alternative physical site. Key to this are the working methods of an invented archival system of design reasoning, the unearthing of archaeological texts and assuming of authorship within the individual frameworks of the roles of archivist, archaeologist and author.
The redefined role of the architect as archaeologist takes onboard the unearthing of associated drawings and writings as well as the methods of organising and applying the recovered information to the system set up by the archivist. This analysis of the graphic and text based information is used to formulate historical narratives that are woven into the design project. Whereas traditional archaeology stresses on the study of a site from a site with quantifiable limits to the physical context, the notion of archaeological sites in this instance refers to the places where the stored information is unearthed. Through the careful process of archiving and analysing this information, a new site that is located within both the physical and historical contexts of interest is discovered. The author then draws upon the elements in the archival system that includes the findings of the archaeologist to construct the alternative Ditchley portrait in this new site of the Echoing Cedar, the result of which bears no visual resemblance to the existing work.
The Tactile Window is a reading of the Ditchley portrait in which information about and in the painting is transformed into a design proposal for an inhabited structure. The intended method of interaction with this alternative portrait is not merely restricted to vision but relies on engagement with the other senses. This experience is enhanced by the interplay with certain site conditions such as wind and rain in order to allude to specific aspects of the Ditchley portrait that are not visually apparent in the existing work.
In the processes of excavating, finding and revealing the hidden information to create this alternative portrait, the effects of the visuals afforded by the existing portrait inadvertently begin to fade as the validity of a single means of visual expression is questioned
- …
