1,720,997 research outputs found
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
Mikrostruktur och väteförsprödning av additivt tillverkad Ti-6Al-4V
No full textThe work of this doctoral thesis has been performed between the 24th of August 2015 to the 6th of September 2019. The general purpose of this work has been to increase the knowledge of additively manufactured Ti-6Al-4V when it comes to microstructure, texture and hydrogen embrittlement. Several additive manufacturing (AM) processes have been addressed, the main focus, however, has been on the two processes electron beam melting (EBM) and selective laser melting (SLM). The work has been performed at Luleå University of Technology and at Monash Centre of Additive Manufacturing (MCAM), which is a part of Monash University, Melbourne Australia. GKN Aerospace Engine Systems has been involved in the work as a collaborative industrial partner. Where the main interaction and support has been between GKN in Trollhättan, Sweden. GKNs facility in Filton, United Kingdom, however, has also been involved in sample production. The texture measurements using neutron time of flight (TOF) diffraction were performed in Dubna, Russia at Frank Laboratory of Neutron Physics at the Joint Institute for Nuclear Research, using the spektrometer kolitshestvennovo analiza tekstury (SKAT) instrument and in Los Alamos at Los Alamos Neutron Science Center, using the texture instrument high pressure preferred orientation (HIPPO). The interest of specifically additively manufactured Ti-6Al-4V originates from GKN Aerospace Engine Systems as they have been contracted to manufacture parts for the Ariane rockets. In aerospace, weight is of utter importance as reduced weight of the components reduce the fuel costs and makes it possible to transport increased loads. Therefore, titanium has been suggested to replace heavier metal alloys (such as nickel-based superalloys) due to titanium’s high specific strength and overall good properties. The work has been managed under the supervision of Professor Marta-Lena Antti, Professor Robert Pederson and Dr. Pia Åkerfeldt at Luleå University of Technology and by Professor Xinhua Wu and Professor Aijun Huang at MCAM. The project has been financed by three parties Space for Innovation and Growth (RIT), Nationellt Rymdtekniskt Forskningsprogram (NRFP) and the Graduate School of Space Technology. The thesis is composed of a literature review along with the appended papers that have been written throughout the duration of the project. The purpose of the literature review is to give the reader a broader knowledge and context about the theory behind the work conducted during the Ph.D. project. The thesis commences with a theoretical background about titanium, its crystal structures, microstructure, and AM. The chapter about AM is divided into three sub-chapters, explaining the two different AM sub-groups directed energy deposition (DED) and powder bed fusion (PBF). Then the chapter finalizes with explaining the benefits and drawbacks with AM. Once these subjects been explained there is a chapter explaining AM built Ti-6Al-4V. The theme of this chapter is the differences in the microstructure of AM built and conventional built Ti-6Al-4V, where phenomena like chessboard pattern and layers bands are discussed, followed by a comparative section of the mechanical properties. The chapter about AM built Ti-6Al-4V is followed by a chapter about texture where the two texture techniques electron backscattered diffraction (EBSD) and neutron (TOF) diffraction are explained. The literature review then continues with the chapters neutron tomography, hydrogen embrittlement, and fatigue crack growth. Then there is a chapter about the materials and experimental methods that have been used to perform all the experiments, then a summary of all the papers and conclusions. After the conclusions, the thesis finalizes with a chapter about possible future work and an outlook into the future of AM. In the end, the papers I to IV are appended.
Microstructure and Texture of Additive Manufactured Ti-6Al-4V
No full textAdditive manufacturing (AM) for metals is a manufacturing process that has increased a lot in popularity last few years as it has experienced significant improvements since its beginning, both when it comes to accuracy and deposition rates. There are many different AM processes where the energy sources and deposition methods varies. But the common denominator is their layer wise manufacturing process, melting layer on layer. AM has a great design freedom compared to conventional manufacturing, making it possible to design new structures with decreased weight and increased performance. A drawback is slow manufacturing speeds, making it more expensive. But when it comes to low lot sizes and complex structures AM is very competitive. So, for the aerospace and space industry AM is a good option as manufacturing cost is less of an issue and where saving weight is of great concern, both environmentally and economically. There are however many topics left to research before additive manufactured titanium can be widely adopted for critical components, such as microstructure and texture development and its correlation to mechanical properties. The aim of this work has been to investigate the microstructure and texture of various AM processes. Microstructural features such as prior β grains, grain boundary α (GB-α), α laths, α colonies have been characterized along with hardness measurements for 5 different AM processes. Some of these AM processes have also been investigated in the SKAT instrument in Dubna, Russia, to obtain their texture. These textures have then been compared with one another and correlated to previous microstructural investigations and mechanical properties. This is important knowledge as the microstructure and the texture sets the basis for the mechanical properties. In case there is a high texture, the material can have anisotropic mechanical behavior, which could be either wanted or unwanted for different applications. Some the findings are that α phase was found to increase in the prior β grain boundary for the AM processes with low cooling rates, while it was discontinuous and even non-present for the AM processes with high cooling rates. The prior β size are larger for the directed energy deposition (DED) processes than for the powder bed fusion (PBF) processes. Parallel bands were present for the DED process while being non-present for the PBF processes. Concerning the texture, it was found that LMwD had a higher texture than EBM and SLM. Texture inhomogeneity was also found for the LMwD process., where two parts of the same sample was investigated and the material closer to the surface had higher texture.
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
Author-wise bibliometric analysis based on entropy.
No full textAuthor-wise bibliometric analysis based on entropy.</p
- …
