1,720,963 research outputs found
Electrode materials for microbial fuel cells: nanomaterial approach
No full textMicrobial fuel cell (MFC) technology has the potential to become a major renewable energy resource by degrading organic pollutants in wastewater. The performance of MFC directly depends on the kinetics of the electrode reactions within the fuel cell, with the performance of the electrodes heavily influenced by the materials they are made from. A wide range of materials have been tested to improve the performance of MFCs. In the past decade, carbon-based nanomaterials have emerged as promising materials for both anode and cathode construction. Composite materials have also shown to have the potential to become materials of choice for electrode manufacture. Various transition metal oxides have been investigated as alternatives to conventional expensive metals like platinum for oxygen reduction reaction. In this review, different carbon-based nanomaterials and composite materials are discussed for their potential use as MFC electrodes
Localized Heating in Membrane Distillation for Performance Enhancement
No full textMembrane distillation (MD) is an emerging technology capable of treating high-saline feeds and operating with low-grade heat energy. However, commercial implementation of MD is limited by so-called temperature polarization, which is the deviation in the temperature at the feed-membrane interface with respect to the bulk fluid. This work presents solutions to alleviate temperature polarization in MD by employing a localized heating concept to deliver heat at the vicinity of the feed-membrane interface. This can be realized in multiple ways, including Joule heating, photothermal heating, electromagnetic induction heating, and nanofluid heating. In the first experiment, a Joule heating concept was implemented and tested, and the results showed a 45% increase in permeate flux and a 57% decrease in specific energy consumption. This concept was further improved by implementing a new dead-end MD configuration, which led to a 132% increase in the gained output ratio. In addition, the accumulation of foulants on the membrane surface could be successfully controlled by intermittent flushing of feedwater. Three-dimensional CFD calculations of conjugate heat transfer revealed a more uniform heat transfer and temperature gradient across the membrane due to the increased feedwater temperature over a larger membrane area.
In another approach, a photothermal MD concept was used to heat the feed water locally. A 2-D photothermal material, MXene, recently known for its photothermal property, was used to coat commercial MD membranes. The coated membranes were evaluated under one-sun illumination to yield a permeate flux of 0.77 kg.mh with a photothermal efficiency of 65.3% for a feed concentration of 0.36 g.L. The system can produce around 6 liters of water per day per square meter of membrane.
An energy analysis was also performed to compare the efficiency of various energy sources. Considering the sun as a primary energy source, the performance of different heating modes was compared in terms of performance and scale-up opportunities.
Overall this work demonstrates that the application of localized heating will enable the scale-up and the use of renewable energy sources to make the MD process more efficient and sustainable.The illustrative figure was produced by Ana Bigio, scientific illustrator, KAUST
Study the Transport Properties of Anion and Cation Exchange Membranes Toward Various Ions Using Chronopotentiometry
No full textThe transport properties of various anion and cation exchange membranes were studied in different electrolyte solutions using chronopotentiometry technique to get insight about the influence of the counter ion on the transport properties of the membranes. The investigated samples include heterogeneous ion exchange membranes varying in the functionality of fixed charged groups, physical properties of the polymer and the preparation procedure. Chloride and nitrate were investigated as counter-ion in their sodium salts for anion exchange membranes while sodium, calcium, potassium, and magnesium were selected as counter-ion in their chloride salts to study cation exchange membranes transport properties. First, the current – voltage curve of an ion exchange membrane in a given solution was recorded to obtain the limiting current, then a constant current above the limiting current was used for chronopotentiometry measurement. In all the studied membranes the potential across the membrane remained constant for a time interval called the transition time , when a constant current was applied. Then the potential increased rapidly to reach the steady state potential. The permselectivty and the transport number of a membrane were calculated using the corresponding transition time.This work was carried out within the framework of the project No. LO1418 “Progressive development of Membrane Innovation Centre” supported by the program NPU I Ministry of Education Youth and Sports of the Czech Republic, using the infrastructure of the
Membrane Innovation Centr
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
