1,720,991 research outputs found
The 3d tele motion tracking for the orthodontic facial analysis
Full text linkAim. This study aimed to evaluate the reliability of 3D-TMT, previously used only for dynamic testing, in a static cephalometric evaluation. Material and Method. A group of 40 patients (20 males and 20 females; mean age 14.2±1.2 years; 12-18 years old) was included in the study. The measurements obtained by the 3D-TMT cephalometric analysis with a conventional frontal cephalometric analysis were compared for each subject. Nine passive markers reflectors were positioned on the face skin for the detection of the profile of the patient. Through the acquisition of these points, corresponding plans for three-dimensional posterior-anterior cephalometric analysis were found. Results. The cephalometric results carried out with 3D-TMT and with traditional posterior-anterior cephalometric analysis showed the 3D-TMT system values are slightly higher than the values measured on radiographs but statistically significant; nevertheless their correlation is very high. Conclusion. The recorded values obtained using the 3D-TMT analysis were correlated to cephalometric analysis, with small but statistically significant differences. The Dahlberg errors resulted to be always lower than the mean difference between the 2D and 3D measurements. A clinician should use, during the clinical monitoring of a patient, always the same method, to avoid comparing different millimeter magnitudes
MARGINAL BONE LOSS,BIOLOGICAL WIDTH AND GEOMETRIC SHAPE OF THE ABUTMENT:7-YEAR FOLLOW-UP OF AN ABUTMENT CALLED Trumpet R
Full text linkBackground. Marginal bone resorption observed around osseointegrated implants after the first year is particularly dangerous, especially if the implants are sandblasted and etched. In this case, this MBL can open the way to bacteria that, by colonizing the implant surface, can trigger peri-implantitis and the loss of the implants and the prosthesis screwed onto them. The aim of this work was to evaluate the MBL around implants inserted with a mathematical protocol and prostheticized with a one-time abutment called Trumpet. Materials and Methods: 10 patients were considered who needed an all-on-six rehabilitation (5) and single rehabilitations (5). Measurements of the soft tissue thickness and the distance between the crest and the implant neck (CI) were performed at the time of surgery and at a distance of 1.3 and 7 years. Results: Clinical and radiographic controls performed at a distance of 1.3 and 7 years of the treated patients showed the same CI distance (Crest-Implant) in all patients without observing marginal bone loss. Conclusions: The use of a mathematical model that takes into account the soft tissue thickness for the positioning of the implant with respect to the bone crest and the use of abutments that give more space to the soft tissues to respect the biological width seems to be the correct way to avoid the loss of marginal bone around the implants
Performance of Rigid and Soft Transfer Templates Using Viscous and Fluid Resin-Based Composites in the Attachment Bonding Process of Clear Aligners
Full text linkObjectives. The study aims at assessing the accuracy of the process of attachment bonding in aligner treatments. The analysis leads to the error estimation in the faithful reproduction of master model attachments using two types of transfer templates and two light-curing resin-based composites usually used in orthodontics. Methods. The authors have used two transfer templates made of two different materials. The first, named Leone-biocompatible thermoforming material hard/soft, has a lower Young’s modulus and is labelled as soft, while the other, named Leone-biocompatible thermoforming material, is marked as rigid. The resin-based composites possess different mechanical and rheological properties. Specifically, Transbond™ XT Light Cure Paste Adhesive, 3M has a higher viscosity than the TetricEvoflow, Ivoclar Vivadent, a flowable nanohybrid composite. The authors attempt to estimate the performance ranking between the four possible couples obtained by combining the two light-curing resin-based composites and transfer templates. Each combination was repeated in six models and compared with twelve master models, resulting in 36 total samples. A 3-D laser scanner is used to generate a digital model of each model. The comparison between digital models is the base for a comparative assessment in terms of relative and absolute error. The relative error is estimated using scalar performance indicators ranging from 0 to 1, where 1 indicates the optimum matching. The absolute error estimated from the mean square error between the coordinates of each digital model yields the reproduction accuracy in micrometer. Furthermore, the authors attempted to assess the error distribution by evaluating the point-by-point difference between the digital models. Results. This analysis aims at localizing the sources of error in the considered models. The use of Transbond™ XT Light Cure Paste Adhesive, 3M with a rigid transfer template is always associated with significant accuracy and minor dispersion. However, in a few instances, using the soft template or the flowable resin-based composite can lead to bad performances. Significance. The data processing bestowed the following performance ranking from the first with lower reproduction error to the last characterized by the worst performance: (1) attachments bonding with rigid template and Transbond™ XT Light Cure Paste Adhesive, 3M, (2) attachments bonding with soft template and Transbond™ XT Light Cure Paste Adhesive, 3M, (3) attachments bonding with rigid template and TetricEvoflow, Ivoclar Vivadent, and (4) attachments bonding with soft template and TetricEvoflow, Ivoclar Vivadent
Cone beam computed tomography investigation of the antral artery anastomosis in a population of Central Italy
Full text linkBackground: The arterial vascular supply of maxillary sinus has to be considered in all the surgical procedures where it is involved. In particular, the intraosseous anastomosis between the posterior superior alveolar artery and the infraorbital artery branches in the bony canal can be tricky to a not well aware clinician. The aim of this study is to investigate the arterial blood supply of the maxillary sinus to give clinicians the basis for a better understanding of vascular complications that can derive from surgical procedures at this level. Materials and methods: One hundred cone beam computed tomography were analysed by the Imaging software for three-dimensional images, i-Dixel 2.0. The parameters considered have been the presence (i), the calibre (ii), the dorso-ventral length (iii) and the cranio-caudal distance (iv). The data have been processed with means, standard deviations and verified by T-Student test. Results: The statistical outputs showed that the 38% of samples presented the intraosseous anastomosis. Those anastomosis resulted long in dorso-ventral way both on left (12.55 ± 4.3 mm) and right side (12.4 ± 4.3 mm). The mean cranio- -caudal distance resulted 15.71 ± 5.08 mm on the left and 14.73 ± 4.74 mm on right side. The calibre measurements resulted quite big as well: 1.68 ± 0.3 mm on the left and 1.54 ± 0.38 mm on the right. The differences between the right and left sides were found not statistically significant. Conclusions: This in vivo investigation shows how a knowledge of the maxillary sinus vascularisation is essential during the programming surgical phase in order to prevent blood complications during the operations involving this region
Use and Evaluation of a Cooling Aid in Laser-Assisted Dental Surgery: An Innovative Study
No full textObjective: The aim of this study was to evaluate the beneficial effect of NeoHeal during laser-assisted oral surgery. Background data: Laser-assisted surgery is a less invasive technique than conventional surgery using a blade; however, the heat produced by the laser can damage tissue proximal to the treated area. We hypothesized the hydrogel NeoHeal could be applied during oral surgery and have similar benefits as those already described for dermatological surgery. Methods: In our randomized controlled trial, we first selected 30 patients who were to undergo laser surgical intervention using a diode laser. Both at the end of intervention and at follow-up, each patient filled out a questionnaire comprising two questions. The answers to the questions were statistically analyzed with regard to frequency of each response, and validated by the Wilcoxon test with a p value <0.05 being considered significant. Results: The use of NeoHeal significantly reduced the pain experienced by patients both during the intervention and at the 7-day follow-up. NeoHeal clearly reduces surgery-related pain experienced by patients. Conclusions: The results show positive feedback from the patients, demonstrating how the hydrogel pads are necessary, useful, and effective as a cooling aid in laser-assisted dental surgery
Mechanical Reliability Evaluation of an Oral Implant-Abutment System According to UNI en ISO 14801 Fatigue Test Protocol
No full textPurpose: The aim of this in vitro study was to evaluate the mechanical reliability of a dental implant system by testing its maximum fracture load and mechanical performance under cyclic fatigue stress. Methods: An experimental study according to the international standards (UNI EN ISO 14801: 2008) was performed using 13 implants (3.80 mm in diameter and 12 mm in length) with straight titanium abutments tightened to 30 N. Five samples were subjected to compression stress at break. Based on the mean fracture load value obtained in this test, the levels of dynamic loading range were set and were carried on at a frequency of 15 Hz for 5 × 10 6 cycles. Results: The compression stress at break mean value of the tested implants was 430 N (SD ± 35.66 N). In the mechanical fatigue stress test, the fatigue limit for 5 × 10 6 load cycles was 172 N. Conclusions: The evaluated implant system proved to withstand considerable mechanical loads under the "worst-case" loading situation performed according to UNI EN ISO 14801 standard. The reliability of this test protocol makes it suitable to be accomplished for understanding and comparing mechanical properties of implant systems
Oral Alterations in Heritable Epidermolysis Bullosa: A Clinical Study and Literature Review
Full text linkEpidermolysis bullosa (EB) is a group of skin disorders with skin fragility characterized by blistering from minimal mechanical trauma with rupture at the dermoepidermal junction. There are four major classical heritable EB types, due to mutations in as many as 20 distinct genes: EB simplex (EBS), junctional EB (JEB), dystrophic EB (DEB), and Kindler EB (KEB). This study is aimed at reporting case series on patients (N = 8; males, n = 5 and females, n = 3, age range 12-68 years) affected by EB and performs a review of the literature on this topic. This group of disorders can affect oral soft and hard tissues in various ways, resulting in various effects including enamel hypoplasia, dental caries, microstomia, ankyloglossia, oral blistering, and ulcerations early-onset periodontal disease. From the sample results, it can be concluded that the clinical manifestation of EB patients is highly variable and very different in prognosis. Oral health deeply influences the quality of life of EB patients. Dental management is essential to prevent the aggravation of soft tissue damage and tooth loss and to improve the quality of life through prosthetic and restorative therapies. Dentists should consider the oral alterations of EB subtypes to perform a personalized approach to the patients' needs in a preventive and therapeutic point of view
Periodontal status of buccally and palatally impacted maxillary canines after surgical-orthodontic treatment with open technique
No full textThis study investigated differences in periodontal health variables between buccally impacted maxillary canines (BIMC) and palatally impacted maxillary canines (PIMC) after surgical-orthodontic treatment with open technique. Nineteen patients were enrolled: 10 with unilateral BIMC (5 men, 5 women; mean age 18.50 ± 1.96 years) and 9 with unilateral PIMC (4 men, 5 women; mean age 19.44 ± 2.40 years). Probing depth and keratinized tissue were recorded 12 months after surgical-orthodontic treatment, and the differences between the 2 sides were analyzed as primary outcomes. In addition, data for BIMC and PIMC were directly compared. In the BIMC group, probing depths were significantly higher for lateral incisors than for the untreated side (P = 0.044), and keratinized tissue values were significantly lower for canines than for the untreated side (P = 0.006). No significant differences were observed in the PIMC group. In BIMC, surgical-orthodontic treatment with open technique resulted in loss of periodontal keratinized tissue in the treated tooth and periodontal attachment loss in adjacent lateral incisors. However, the periodontal status of PIMC was not affected by surgical-orthodontic treatment with open technique
Ultra-low-frequency transcutaneous electric nerve stimulation (ULF-TENS) in subjects with craniofacial pain: A retrospective study
No full textObjective: The aim of the present study was to evaluate the effects of ultra-low-frequency transcutaneous electrical nerve stimulation (ULF-TENS) on pain and electromyographic values in subjects affected by temporomandibular disorders. Methods: A retrospective evaluation of 80 non-consecutive patients (58 women, 22 men, mean age 35.3 ± 9.9 years) suffering from pain associated with temporomandibular disorders was performed. The sample was treated with ULF-TENS, and outcomes were evaluated by anamnestic index, dysfunction index, visual analog scale, and surface electromyography of the masticatory muscles. Results: An improvement was seen in pain and electromyographic values. The visual analog scale showed a mean decrease from 8 to 2; surface electromyographic values in the masseter area decreased from 2.7 ± 0.1 to 1.5 ± 0.1. Conclusion: ULF-TENS seems to be effective in reducing pain symptomatology of subjects affected by temporomandibular disorders, with a reduction in the surface electromyographic activity in the masseter area
- …
