305,127 research outputs found
Fabrication, mechanical properties and in vitro degradation behavior of newly developed ZnAg alloys for degradable implant applications
No full textZn and Zn-based alloys have been recognized as highly promising biodegradable materials for orthopedic implants and cardiovascular stents, due to their proved biocompatibility and, more importantly, lower corrosion rates compared to Mg alloys. However, pure Zn has poor mechanical properties. In this study, Ag is used as a promising alloying element to improve the mechanical properties of the Zn matrix as well as its biocompatibility and antibacterial properties. Accordingly, we design three ZnAg alloys with Ag content ranging from 2.5 to 7.0wt% and investigate the influence of the Ag content on mechanical and corrosion behavior of the alloys. The alloys are developed by casting process and homogenized at 410°C for 6h and 12h, followed by hot extrusion at 250°C with extrusion ratio of 14:1. Degradation behavior is assessed by electrochemical and static immersion tests in Hank's modified solution. Microstructural analysis reveals that hot extrusion significantly reduces the grain size of the alloys. Zn-7.0%Ag alloy shows a reasonably equiaxed and considerably refined microstructure with mean grain size of 1.5μm. Tensile tests at room temperature suggest that increasing the Ag content steadily enhances the tensile strength, while it does not affect the tensile ductility significantly. Zn-7.0%Ag shows high yield strength and ultimate tensile strength of 236MPa and 287MPa, respectively, which is due to the grain refinement and high volume fraction of fine AgZn3 particles precipitating along the grain boundaries during the extrusion process. Among all these alloys, Zn-7.0%Ag displayed superplasticity over a wide range of strain rates (from 5×10(-4)s(-1) to 1.0×10(-2)s(-1)) providing the possibility of exploiting forming processes at rapid rates and/or even at lower temperatures. In addition, extruded alloys exhibit slightly faster degradation rate than pure Zn. X-ray diffraction results show the presence of ZnO and Zn(OH)2 on the degraded surfaces. Moreover, scanning electron microscopy imaging reveals that micro-galvanic corrosion is more pronounced on the alloys with higher Ag content due to the higher volume fraction of AgZn3 particles. [Abstract copyright: Copyright © 2017 Elsevier B.V. All rights reserved.
Microstructural, texture, plastic anisotropy and superplasticity development of ZK60 alloy during equal channel angular extrusion processing
No full textIn this study, equal channel angular pressing (ECAP) was exploited to refine the grain size of a ZK60 magnesium alloy in multi-processing steps, namely at temperatures of 250 ̊C, 200 ̊C and 150 ̊C, producing an ultrafine-grained (UFG) structure. The microstructural development and texture evolution during ECAP were systemically investigated by electron backscattered diffraction (EBSD) analysis. The microstructure of the ECAP processed alloy was remarkably refined to an average grain size of 600 nm. During ECAP process the original fiber texture of the as-extruded alloy was gradually weakened and eventually replaced by a stronger texture component coinciding with ECAP shear plane. The ECAP processed material showed a proper balance of tensile as well as compression strength and tensile ductility at room temperature. Yield strength of 273 and 253 MPa in tension and compression, respectively, ultimate tensile strength of 298 MPa and fracture elongation of about 30% were obtained in the UFG alloy. A transition from ductile–brittle to ductile fracture consisting of very fine and equiaxed dimples was also found in the ECAP processed material. Compared to the as-received alloy, a combination of grain refinement and texture development in the UFG alloy gave rise to a notable reduction in mechanical asymmetric behavior at room temperature. The superplastic behavior of the as-extruded and ECAP processed alloy was also investigated at 200 ̊C with strain rate of 1.0×10-3 s-1.
The concurrent effect of grain boundary sliding and favorable basal texture in the UFG alloy led to an achievement of elongation value of about 300% while, under similar testing conditions, the elongation of about 140% was obtained in the as-extruded alloy
Going Beyond Counting First Authors in Author Co-citation Analysis
No full textThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Dispelling the Myths Behind First-author Citation Counts
No full textWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
Author, publisher and bookseller : a tripartite synergy in Nigerian book industry
No full textThis work is about the roles of Author, Publisher and Bookseller in Book development in
Nigeria. The paper started by delving into the history of Book Publishing in Nigeria after
which it proceeded by defining who an author, a publisher, and a bookseller is and
expatiated on the indispensable roles of these key actors in Nigerian Book Industry and in
the emerging Information Society. Furthermore, the various constraints to book
development were identified while the paper advised on how the Book Industry can be
further promoted in Nigeria. However, the paper concluded and made recommendations
on how the Book sector can help in enhancing scholarship in the country
[Report to Chief J. E. Curry, by an unknown author #2]
No full textReport to Chief J. E. Curry, by an unknown author. The report contains a list of officers who gave depositions to the United States Attorney
[Report to Chief J. E. Curry, by an unknown author #1]
No full textReport to Chief J. E. Curry, by an unknown author. The report contains a list of officers who gave depositions to the United States Attorney
Mining e-mail content for author identification forensics
No full textWe describe an investigation into e-mail content mining for author identification, or authorship attribution, for the purpose of forensic investigation. We focus our discussion on the ability to discriminate between authors for the case of both aggregated e-mail topics as well as across different email topics. An extended set of e-mail document features including structural characteristics and linguistic patterns were derived and, together with a Support Vector Machine learning algorithm, were used for mining the e-mail content. Experiments using a number of e-mail documents generated by different authors on a set of topics gave promising results for both aggregated and multi-topic author categorisation
- …
