1,720,955 research outputs found
Hybrid additive manufacturing of an electron beam powder bed fused Ti6Al4V by transient liquid phase bonding
Full text linkHybrid Additive Manufacturing (HAM) is a production strategy enhancing the flexibility of the already versatile Additive Manufacturing (AM) techniques. AM of Ti6Al4V, on the other hand, has been of great interest to numerous research works, thanks to the unique corrosion, biomedical and mechanical properties of the alloy. Hence, this research marks the first report on the HAM of Ti6Al4V by Transient Liquid Phase (TLP) bonding of an Electron Beam Powder Bed Fused (EB-PBF) sample to a conventional one. A copper interlayer was used for bonding, and the TLP process was performed at 890 degrees C and 970 degrees C for 60 min. Shear strength test was carried out and the results showed the highest shear strengths of 579.3 and 662.5 MPa for TLP bonding at 890 degrees C and 970 degrees C, respectively. By increasing the bonding temperature to 970 degrees C, no Cu-rich phases were observed in the microstructure, as opposed to the 890 degrees C samples, and a complete isothermal solidification without intermetallic phases was achieved. Moreover, the 970 degrees C TLP sample was featured with a much better microstructural integrity and homogeneity in both the base metals and the bonded zone. TLP bonding at 970 degrees C resulted in a more ductile fracture surface than that bonded at 890 degrees C. The strong differences between the two TLP bonds were primarily attributed to the faster diffusion rate of elements along the joint and base metal at higher temperatures. (C) 2022 The Author(s). Published by Elsevier B.V
Investigation on the Potential of Laser and Electron Beam Additively Manufactured Ti-6Al-4V Components for Orthopedic Applications
No full textIn the present study, corrosion properties and biocompatibility of as-built and as-polished Ti-6Al-4V samples fabricated by Electron Beam Melting (EBM) and Selective Laser Melting (SLM) were investigated and compared with a conventional sample as a reference. Optical microscope, Scanning Electron Microscope equipped with Energy Dispersive Spectroscopy, and X-ray diffraction analysis were employed for studying the microstructure and composition of the samples. Polarization, electrochemical impedance, and immersion tests were carried out to investigate the corrosion behavior and bioactivity of the samples in the Simulated Body Fluid solution. The results revealed that the EBM samples exhibited a superior corrosion resistance compared to the SLM one, thanks to the absence of low corrosion resistant alpha' martensitic phases and a higher fraction of beta phase in the EBM samples. It was also observed that while the wrought Ti-6Al-4V samples had a higher corrosion current density than the additively manufactured ones, both EBM and SLM processes had a lower corrosion resistance in the as-built state than in the as-polished. The immersion tests in the SBF solution revealed a more significant bioactivity for the EBM samples than the SLM samples. Higher levels of the beta phase in the EBM microstructure stimulated the nucleation and growth of the apatite on the sample surface. Also, higher surface roughness in the as- built samples improved the bioactivity by increasing the metal/ electrolyte interface and thus forming more OH- groups on the Ti alloy surface
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
Author-wise bibliometric analysis based on entropy.
No full textAuthor-wise bibliometric analysis based on entropy.</p
- …
