8,006 research outputs found
Perancangan Sistem Informasi Pengelola Barang/Inventaris Di Jc Komp
No full textInventory information system is a system used to enter inventory data into the database, so that there are no errors in input, output data, and reporting based on the desired data. based on surveys and interviews with jc comp personnel, information was obtained that the existing system in the jc comp warehouse section is still manual. therefore, the system that will be created by the author is the result of a replication of the existing system in the jc comp warehouse section. in addition to the process of input and output of goods, this information system is also equipped with features for creating data reports, input and output of goods, and searching for goods data by item name. with the inventory information system is expected to be useful for the warehouse parts jc comp. By implementing this system in the jc comp warehouse, it is hoped that it can reduce errors that may occur. this system is also expected to further speed up the process of input, output, and report generation, which in turn will help the jc comp warehouseSistem Informasi Persediaan Barang adalah sebuah sistem yang digunakan untuk memasukkan data-data persediaan barang ke dalam database, sehinggga tidak terjadi kesalahan dalam input, output data, dan pembuatan laporan berdasarkan data yang diinginkan. Berdasarkan survey dan wawancara dengan bagian personalia Jc Komp, didapatkan informasi bahwa sistem yang ada dibagian gudang Jc Komp masih manual. Oleh karena itu, sistem yang akan dibuat oleh penulis adalah hasil replikasi dari sistem yang telah ada dibagian gudang Jc Comp. Selain proses input dan output barang, pada sistem informasi ini juga dilengkapi fitur pembuatan laporan data, input, dan output barang, dan pencarian data barang berdasarkan nama barang. Dengan adanya Sistem Informasi persediaan barang ini diharapkan dapat bermanfaat bagi bagian gudang Jc Komp. Dengan diterapkannya sistem ini pada bagian gudang Jc Comp, maka diharapkan dapat mengurangi kesalahan-kesalahan yang mungkin terjadi. Sistem ini juga diharapkan dapat lebih mempercepat proses input, output, dan pembuatan laporan yang pada akhirnya dapat membantu bagian gudang Jc Komp
Características de los factores relevantes de las declaraciones tributarias de la pequeña empresa servicios múltiples “JC E.I.R.L” - Huaraz, 2020
No full textLa investigación tuvo problema: ¿Cuáles son las características relevantes de las declaraciones tributarias de la pequeña empresa de servicios múltiples “JC E.I.R.L” - Huaraz, 2020?, el objetivo general fue: Determinar las características relevantes de las declaraciones tributarias de la pequeña empresa mencionada anteriormente. La investigación fue de tipo cuantitativo, de nivel descriptivo simple, diseño no experimental - transversal, tuvo como población y muestra la entidad “JC E.I.R.L.”; se empleó la técnica de la encuesta y como instrumento el cuestionario a 5 de sus directivos. Los resultados fueron: el 100% utilizó el formulario virtual para las declaraciones del IGV, el 100% usó el programa de declaración telemática 0621, el 60% pago las tasas por servicios públicos, el 100% pagó la licencia de construcción, el 80% realizó el descuento oportuno por concepto de ONP y el 80% aporto al ESSALUD oportunamente. En conclusión, se tuvo que la empresa “JC E.I.L.” usó el formulario virtual para las declaraciones del IGV y empleó el programa de declaración telemática (PDT 621), por otro lado, si efectuó el pago por servicios públicos, además cumplió con el pago por la licencia de construcción; finalmente la empresa realizo el descuento de ONP y realizó la contribución oportuna al ESSALUD
Amenable L-2-Theoretic Methods and Knot Concordance
No full textWe reveal new structures in the topological knot concordance group. As a key ingredient, we develop obstructions using L-2-theoretic methods for amenable groups in Strebel's class recently introduced by Orr and the author. Concerning (h)-solvable knots, which are defined in terms of certain Whitney towers of height h in bounding 4-manifolds, we show the following: for any n>1, there are (n)-solvable but non-(n. 5)-solvable (and therefore nonslice) knots, which are not detected by prior methods using Cochran-Orr-Teichner L-2-signature obstructions as well as Levine algebraic obstructions and Casson-Gordon invariants.X1197sciescopu
Dynamics of Network Formation Processes in the Co-Author Model
No full textThis article studies the dynamics in the formation processes of a mutual consent network in game theory setting: the Co-Author Model. In this article, a limited observation is applied and analytical results are derived. Then, 2 parameters are varied: the number of individuals in the network and the initial probability of the links in the network in its initial state. A simulation result shows a finding that is consistent with an analytical result for a state of equilibrium while it also shows different possible equilibria.Dynamics, Network, Game Theory, Model,Simulation, Equilibrium, Complexity
High-level polyomavirus JC viruria following long-term steroid therapy
No full textCASE REPORT JC virus is a highly seroprevalent ubiquitous polyomavirus which is acquired at an early age through respiratory or oral route, Thereafter JCV establishes persistent, but mainly asymptomatic, infections in various tissues, including the genitourinary tract and brain Corresponding author Cristina Costa, MD S.C.D.U. Virologia Azienda Ospedaliero-Universitaria San Giovanni Battista di Torino Via Santena, 9 -10126 Torino E-mail: [email protected] increasing with age, with adult prevalence rate often between 15% and 60
Engineering Framework to Utilize Miniaturized Charpy Type SE(B) Specimens to Predict Jc of Full Sized Specimens
No full textAbstractThis paper introduces our experience of using miniature Charpy type SE(B) specimen in obtaining fracture toughness Jc of a material in the ductile to brittle transition temperature (DBTT) region. Width W x thickness B of 2 x 2 mm, 3 x 3 mm and 10 x 10 mm were chosen as miniature specimens and 25 x 25 mm were chosen as full sized specimen. 0.55% carbon steel JIS S55C, whose tensile to yield stress ratio σTS/σYS was equal to 1.8 was chosen as a material to simulate a degraded (embrittled) material in the DBTT region. Focus was placed on whether cleavage fracture could be predicted for these miniaturized specimens. Another focus was placed on whether the Jc of full sized specimen is predictable from the test results of the miniature sized specimens, in case cleavage fracture were observed. The results showed that the modified Ritch-Knott-Rice (RKR) failure criterion (which predicts the onset of cleavage fracture when the crack opening stress measured at 4 times the crack-tip opening displacement exceeds this σ22c) could predict whether cleavage fracture would occur or not. Another finding was that, in case cleavage fracture was observed though, the critical value σ22c in the modified RKR failure criterion was independent of specimen size, and thus, Jc of the full sized specimen is predictable from the miniature specimen test results, though M = (W-a)σYS/Jc was smaller than ASTM E1921 requirement of 30. Here, a and σYS are crack length and yield strength, respectively
Diseño del Sistema de Gestión de Seguridad y Salud en el trabajo para la Empresa Item JC Cía S.A.S.
No full text2 recursos en línea : ilustraciones color, tablas.El trabajo presenta el diseño de un Sistema de Gestión de Seguridad y Salud en el Trabajo el cual le permite a la empresa ITEM JC & CIA S.A.S. identificar, reducir y/o eliminar riesgos y peligros que pueden atentar a la consecución de un ambiente seguro al interior de la organización, buscando así crear una ventaja competitiva frente a otras empresas, cumplir satisfactoriamente con la legislación y mejorar la calidad de vida de sus trabajadores.Bibliografía: página 65.Pregrad
Propuesta de mejora de los factores relevantes de las declaraciones tributarias para la pequeña empresa “Servicios Múltiples JC” E.I.R.L. de la provincia de Huaraz, 2020
No full textLa presente investigación tuvo como objetivo general: Describir las propuestas de mejora de los factores relevantes de las declaraciones tributarias para la pequeña empresa “Servicios Múltiples JC” E.I.R.L de la provincia de Huaraz, 2020. La metodología utilizada fue de tipo no experimental, descriptivo, bibliográfico, documental y de caso, la técnica utilizada fue la revisión bibliográfica y como instrumento un cuestionario de preguntas cerradas. Obteniendo los siguientes resultados. De acuerdo al objetivo 1: los autores revisados concluyeron que la declaración tributaria es importante para la empresa. Respecto al objetivo 2: la empresa considera que la declaración tributaria es importante, de manera puntual. Los elementos de comparación del objetivo específico 1 y 2: coinciden, que la declaración tributaria es importante y el riesgo financiero permitirá detectar contingencias tributarias y minimizar riesgos financieros. Finalmente se concluye que la empresa Servicios Múltiples JC E.I.E.L, que esté debidamente estructurado por los procedimientos y técnicas aplicados, esté de acuerdo con las normas tributarias aplicables, describa la adecuación y eficacia de los controles aplicados a la administración tributaria Incluye una presentación proceso que permite emitir sanciones tributarias y formula recomendaciones para optimizar el cumplimiento para evitar sanciones tributarias
Shifting attention in viewer- and object-based reference frames after unilateral brain injury
No full textThe aims of the present study were to investigate the respective roles that object- and viewer-based reference frames play in reorienting visual attention, and to assess their influence after unilateral brain injury. To do so, we studied 16 right hemisphere injured (RHI) and 13 left hemisphere injured (LHI) patients. We used a cueing design that manipulates the location of cues and targets relative to a display comprised of two rectangles (i.e., objects). Unlike previous studies with patients, we presented all cues at midline rather than in the left or right visual fields. Thus, in the critical conditions in which targets were presented laterally, reorienting of attention was always from a midline cue. Performance was measured for lateralized target detection as a function of viewer-based (contra- and ipsilesional sides) and object-based (requiring reorienting within or between objects) reference frames. As expected, contralesional detection was slower than ipsilesional detection for the patients. More importantly, objects influenced target detection differently in the contralesional and ipsilesional fields. Contralesionally, reorienting to a target within the cued object took longer than reorienting to a target in the same location but in the uncued object. This finding is consistent with object-based neglect. Ipsilesionally, the means were in the opposite direction. Furthermore, no significant difference was found in object-based influences between the patient groups (RHI vs. LHI). These findings are discussed in the context of reference frames used in reorienting attention for target detection
- …
