1,679 research outputs found
Rigor: An Essentiality in Qualitative Research
No full textJamshed, Shazia Qasim; Ibrahim, Mohamed Izham Mohamed; Hassali, Mohamed Azmi Ahmad; Shafie, Asrul Akmal; Al-Haddad, Mahmoud Sa’di Mohammad; Alkalami, Ramadan. (2010). Rigor: An Essentiality in Qualitative Research. Retrieved from the University Digital Conservancy, https://hdl.handle.net/11299/104264
Transkrip wawancara bersama Encik Mohd Sukri bin Mohamed Noor tokoh usahawan pembuatan laksa / Nur Syafiqah Mohd Norizan and Siti Nursyakira Nor Azmi
No full textTranskrip yang ditulis ini mengandungi temu bual bersama seorang tokoh yang bernama Encik Mohd Sukri Mohamed Noor antara Siti Nursyakira Bintz' Nor Azmi dan Nur Syafiqah Bt Mohd Norizan. Temubual ini akan menceritakan mengenai pengalaman hidup beliau dari zaman dahulu hingga sekarang dalam mengendalikan syarikat perusahaan miliknya. Tokoh yang dipilih ini merupakan seorang usahawan yang berjaya dalam menceburkan diri beliau dalam perniagaannya yang diberi nama JCH Food Industries Sdn Bhd. Perniagaan ini memproses, mengilang dan mengedar makanan seperti mee kuning, kuetiau, bebola ikan, laksa segar dan laksam yang dijenamakan sebagai 'Jaafar Che Halimah'. Beliau berjaya menghasilkan produk yang merupakan I00% produk bumiputera Islam. Mereka menjalankan tanggungjawab fardhu kifayah untuk menyediakan produk makanan yang BERSIH, SUCI dan HALAL. Temu bual ini juga akan merungkaikan latar belakang syarikat, sokongan dan dorongan serta cabaran yang dihadapi dalam mengekalkan jenama ini sehingga kini
Modelling the characteristics of a 6/4 Switched Reluctance Motor using neural network / Mohamed Azmi Mohamed Razali
No full textSwitched Reluctance Motor (SRM) are almost always operated within the saturation region and therefore has a very large operation region. This yields very strong nonlinearities, which makes it difficult to derive a comprehensive mathematical model for the behaviour of the machine. Neural Networks can be used to overcome such problems. This paper presents Neural Networks as a tool to model the characteristics of the motor. The flux-linkage versus current relationship as a function of rotor position for a 6/4 SRM was modelled using Neura
Comparison of anthropometric data of 18-25 age (IPT Students) with 18-25 age (NON Students) / Mohamed Azmi Mohamed Ripin
No full textNowadays, industrial have faced the lacks of anthropometric data for making furniture. Anthropometry can be defined as a study of a human body dimension. Anthropometric data is used in designing area of clothing design, workspace design, environment design, design of equipment, tools, and machinery, and also in designing consumer product design. Anthropometry data is used in application to design something that will give comfortable to people with their working space to prevent danger, damages, and any unnecessary activity. The objective of this study is to gather the data of human body measurement as a collection for local anthropometric data for industrial to making furniture based on the anthropometric measurement. The measurement of human body was gather from UITM student and has been compare with non-student, that are working around Bandar Tun Abdul Razak Jengka region. As a conclusion, from the collecting data from my respondent, we can gather new data for anthropometric measurement for industrial furniture making. The ranges between the two variables are not very different, only small standard deviation is being gain from the result has been analyzed
Program pemprosesan data / Zulkarnain Abd. Rahman dan Azmi Mohamed
No full textPada masa sekarang ini, komputer adalah merupakan sesuatu keperluan harian dan perlu bagi kehidupan manusia. Pelbagai perkara menjadi lebih mudah dengan menggunakan komputer. Kerja-kerja yang sebelum ini banyak dikendalikan secara manual, telah beralih kepada penggunaan komputer. Sehubungan dengan itulah maka kami memilih tajuk Program Pemprosesan Data (Data Processing Programe )sebagai projek akhir dan dengan menggunakan Visual Basic(version 6) sebagai bahasa pengaturcaraan. Inilah pertama kali kami menggunakan Visual Basic. Jadi untuk menjayakan projek ini, kami mempelajari sendiri pengaturcaraan Visual Basic dan kami dapati ianya merupakan salah satu bahasa pengaturcaraan yang cukup menarik dan amat berguna dalam bidang kejuruteraan. Banyak sekali masalah yang bersangkut paut dengan kejuruteraan dapat diselesaikan dengan menggunakan Visual Basic. Dalam projek ini, bahasa pengaturcaraan Visual Basic digunakan untuk memproses data yang melibatkari ujian di makmal terhadap model ujikaji yang digunakan. Apabila ujikaji dijalankan di makmal dan mendapatkan data-data yang tertentu, data-data ini akan diproses secara berkomputer dengan menggunakan pengaturcaraan Visual Basic. Nilai-nilai yang diperlukan seperti kadar alir jisim minyak, udara dan juga nisbahnya akan diperolehi apabila data-data tadi dimasukkan dan diproses oleh aturcara. Ini akan dapat dilihat pada coding aturcara dan juga contoh output yang disertakan dalam laporan ini. Maka selain daripada dapat mempelajari sesuatu yang baru atau dapat mempelbagaikan pengetahuan, kami juga dapat menyiapkan projek akhir ini dengan baik. Pada masa akan datang, program yang telah kami bina ini boleh di majukan lagi dengan penggunaan program Visual Basic dengan versi yang lebih tinggi lagi. Cara pengurusan data dengan menggunakan pengkalan data (database) boleh membuatkan sistem pengaturcaraan lebih effisyen dan canggih
Non-contact approach of roundness inspection for machined parts / Azmi Mohamed
No full textThe geometrical tolerance verification of machined part is a process composed of a set of inspection procedures and rules that are complex, tedious and slow. The methods and instruments used to inspect geometrical tolerance of the parts are quite conventional and require a high skill and knowledge to assess the quality of the machined parts. For this reason, this research develop a method to effectively perform the inspection process by recommending non-contact approach using machine vision and new simple mathematical models that can be used for the creation of an inspection system to assist in the verification of an important form tolerance of machined parts. The main goal of this research is to develop method and procedure of roundness measurement that are simple to implement but at the same time is fast and effective to provide reliable technique that help the metrologist to make evaluation for the inspected parts. Two samples of cylindrical machined parts are selected to be measured by this non-contact approach. A test-rig set-up which consists of main components such as workholding fixture, CCD camera, lighting device and motor was developed in order to carry out this study. This research proposes new procedure in image processing by using WiT software. In addition, a new mathematical model for evaluation of roundness error is proposed according to the analogy given by Minimum Zone Circle (MZC) method. The proposed approach and mathematical models were analyzed using several set of number of part images. The results showed that the noncontact inspection system for roundness error were effective and reliable enough to assess this form tolerance. This concept of measurement can be further improved to obtain better accuracy of the roundness error assessment. In summary, this research suggests a new method for geometrical tolerance inspection for machined parts by using machine vision. This system provides flexibility in term of the inspection set-up and is potentially applied for in-line and hundred percent (100%) inspection of the cylindrical machined parts
Non-contact approach of roundness inspection for machined parts / Azmi Mohamed
No full textThe geometrical tolerance verification of machined part is a process composed of a set of inspection procedures and rules that are complex, tedious and slow. The methods and instruments used to inspect geometrical tolerance of the parts are quite conventional and require a high skill and knowledge to assess the quality of the machined parts. For this reason, this research develop a method to effectively perform the inspection process by recommending non-contact approach using machine vision and new simple mathematical models that can be used for the creation of an inspection system to assist in the verification of an important form tolerance of machined parts. The main goal of this research is to develop method and procedure of roundness measurement that are simple to implement but at the same time is fast and effective to provide reliable technique that help the metrologist to make evaluation for the inspected parts
Chicken feather peptone (CFP) from poultry industry waste
No full textAzzahra Arippin, Fatin Izzati Mohamed Azmi and Syazni Zainul Kamal have won gold medal at National Research and Innovation Competition (NRIC) 2012, 17th - 19th July 2012 was held at Dewan Utama Pelajar, located at USM Main Campus, Penang, Malaysia.The study is to investigate the usability of waste chicken feathers as an alternative materials for peptone production, as well as an environmentally friendly methods for removing residues
Assessing consumer behavior from a main website of tourism product / Mazturina Mohamed Razak @ Azmi
No full textWebsites have been used as one of the main promotional items in marketing most of tourism products. This encourage governments all over the world to use websites as one of their marketing tools, and to have one to represent a national tourism product would be costly, nonetheless how effective is it compared to other non-official websites remains to be investigated. Therefore by using the Technology Acceptance Model (TAM) model, this study is to examine consumer’s perceived ease of use and perceived usefulness of a website in determining customers’ intention in visiting a tourism attraction. Two original criteria of TAM model was used in this study; future research utilizing an extended TAM to assess the user acceptance. Past researches have proven that the internet is an important influence on consumers’ behavior. The government’s website on homestay is the context of this study and a quantitative approach through distributing structured questionnaires were adopted. Questionnaires were distributed to about 400 participants that are visiting homestays in Selangor. Descriptive statistics and correlation test are used to analyze the data. This research will offer a better understanding on the effectiveness of the website in influencing tourists’ behavior towards a tourism product. Findings clearly revealed that TAM attributes in particular positively influenced consumers’ visit intention. Among these, perceived usefulness variable were to be the prime influencer compared to perceived usefulness of the website
Computer aided software for low power transformer application / Muhammad Azmi Mohamed Dani
No full textThe objective of this project is to develop a software to cater on the design of Low Power Transformer Le. Shell type and Core type of transformer. A C++ language Version 3.0 by Borland is used in creating the software. This software helps to determine die important parameters that are required in designing a low power transformer. The software wffl display such as the losses, efficiency, voltage regulation and the dimension of transformer
- …
