79,937 research outputs found
A comparative study of statistics-based landslide susceptibility models: A case study of the region affected by the Gorkha earthquake in Nepal
Get PDFAs a result of the Gorkha earthquake in 2015, about 9000 people lost their lives and many more were injured. Most of these losses were caused by earthquake-induced landslides. Sustainable planning and decision-making are required to reduce the losses caused by earthquakes and related hazards. The use of remote sensing and geographic information systems (GIS) for landslide susceptibility mapping can help planning authorities to prepare for and mitigate the consequences of future hazards. In this study, we developed landslide susceptibility maps using GIS-based statistical models at the regional level in central Nepal. Our study area included the districts affected by landslides after the Gorkha earthquake and its aftershocks. We used the 23,439 landslide locations obtained from high-resolution satellite imagery to evaluate the differences in landslide susceptibility using analytical hierarchy process (AHP), frequency ratio (FR) and hybrid spatial multi-criteria evaluation (SMCE) models. The nine landslide conditioning factors of lithology, land cover, precipitation, slope, aspect, elevation, distance to roads, distance to drainage and distance to faults were used as the input data for the applied landslide susceptibility mapping (LSM) models. The spatial correlation of landslides and these factors were identified using GIS-based statistical models. We divided the inventory into data used for training the statistical models (70%) and data used for validation (30%). Receiver operating characteristics (ROC) and the relative landslide density index (R-index) were used to validate the results. The area under the curve (AUC) values obtained from the ROC approach for AHP, FR and hybrid SMCE were 0.902, 0.905 and 0.91, respectively. The index of relative landslide density, R-index, values in sample datasets of AHP, FR and hybrid SMCE maps were 53%, 58% and 59% for the very high hazard classes. The final susceptibility results will be beneficial for regional planning and sustainable hazard mitigation
Use of simulation models to aid soil and water conservation actions for sustainable agro-forested systems
No full textAdequate planning of soil and water conservation requires understanding and prediction of the interactions between soil, climate and management scenarios. These interactions have been investigated over the last decades by means of modelling tools. Some of the most widely used models, namely KINEROS, WEPP, SWAT, and AnnAGNPS have been compared in terms of interfaces, processes, data and parameter requirements, to describe their application domain. Some applicative cases are also added to evidence the importance of rainfall regimes, processes scale, land typologies and management for soil and water conservation modelling, to support the needs of farmers, researchers, extension services and land planners. In general, there is evidence of a large number of parameters to satisfy common users' perception of reliability on simulation results, while they are all good teaching and research tools.info:eu-repo/semantics/publishedVersio
Comparison of earthquake-triggered landslide inventories: A case study of the 2015 gorkha earthquake, Nepal
Get PDFDespite landslide inventories being compiled throughout the world every year at different scales, limited efforts have been made to critically compare them using various techniques or by different investigators. Event-based landslide inventories indicate the location, distribution, and detected boundaries of landslides caused by a single event, such as an earthquake or a rainstorm. Event-based landslide inventories are essential for landslide susceptibility mapping, hazard modeling, and further management of risk mitigation. In Nepal, there were several attempts to map landslides in detail after the Gorkha earthquake. Particularly after the main event on 25 April 2015, researchers around the world mapped the landslides induced by this earthquake. In this research, we compared four of these published inventories qualitatively and quantitatively using different techniques. Two principal methodologies, namely the cartographical degree of matching and frequency area distribution (FAD), were optimized and applied to evaluate inventory maps. We also showed the impact of using satellite imagery with different spatial resolutions on the landslide inventory generation by analyzing matches and mismatches between the inventories. The results of our work give an overview of the impact of methodology selection and outline the limitations and advantages of different remote sensing and mapping techniques for landslide inventorying
A novel per pixel and object-based ensemble approach for flood susceptibility mapping
Get PDFConducting flood susceptibility assessments is critical for the identification of flood hazard zones and the mitigation of the detrimental impacts of floods in the future through improved flood management measures. The significance of this study is that we create ensemble methods using the per-pixel approaches of frequency ratio (FR), analytical hierarchical process (AHP), and evidence belief function (EBF) used for weightings with the object-based ‘geons’ approach used for aggregation to create a flood susceptibility map for the East Rapti Basin in Nepal. We selected eight flood conditioning factors considered to be relevant in the study area. The flood inventory data for the East Rapti basin was derived from past flood inventory datasets held in the regional database system by the International Centre for Integrated Mountain Development (ICIMOD). The flood inventory was classified into training and validation datasets based on the widely used split ratio of 70/30. The Receiver Operating Characteristic (ROC) was used to determine the accuracy of the flood susceptibility maps. The AUC results indicated that the combined per-pixel and object-based geon approaches yielded better results than the per-pixel approaches alone. Our results showed that the object-based geon approach creates meaningful regional units that are beneficial for future planning
Article Predicting Landslides Susceptible Zones in the Lesser Himalayas by Ensemble of Per Pixel and Object-Based Models
Get PDFLandslide susceptibility is a contemporary method for delineation of landslide hazard zones and holistically mitigating the future landslides risks for planning and decision-making. The significance of this study is that it would be the first instance when the ‘geon’ model will be attempted to delineate landslide susceptibility map (LSM) for the complex lesser Himalayan topography as a contemporary LSM technique. This study adopted the per-pixel-based ensemble approaches through modified frequency ratio (MFR) and fuzzy analytical hierarchy process (FAHP) and compared it with the ‘geons’ (object-based) aggregation method to produce an LSM for the lesser Himalayan Kalsi-Chakrata road corridor. For the landslide susceptibility models, 14 landslide conditioning factors were carefully chosen; namely, slope, slope aspect, elevation, lithology, rainfall, seismicity, normalized differential vegetation index, stream power index, land use/land cover, soil, topographical wetness index, and proximity to drainage, road, and fault. The inventory data for the past landslides were derived from preceding satellite images, intensive field surveys, and validation surveys. These inventory data were divided into training and test datasets following the commonly accepted 70:30 ratio. The GIS-based statistical techniques were adopted to establish the correlation between landslide training sites and conditioning factors. To determine the accuracy of the model output, the LSMs accuracy was validated through statistical methods of receiver operating characteristics (ROC) and relative landslide density index (R-index). The accuracy results indicate that the object-based geon methods produced higher accuracy (geon FAHP: 0.934; geon MFR: 0.910) over the per-pixel approaches (FAHP: 0.887; MFR: 0.841). The results noticeably showed that the geon method constructs significant regional units for future mitigation strategies and development. The present study may significantly benefit the decision-makers and regional planners in selecting the appropriate risk mitigation procedures at a local scale to counter the potential damages and losses from landslides in the area
Geosciences / Impact of Spatial Resolution of Digital Elevation Model on Landslide Susceptibility Mapping: A Case Study in Kullu Valley, Himalayas
Get PDFLandslides are one of the most damaging geological hazards in mountainous regions such as the Himalayas. The Himalayan region is, tectonically, the most active region in the world that is highly vulnerable to landslides and associated hazards. Landslide susceptibility mapping (LSM) is a useful tool for understanding the probability of the spatial distribution of future landslide regions. In this research, the landslide inventory datasets were collected during the field study of the Kullu valley in July 2018, and 149 landslide locations were collected as global positioning system (GPS) points. The present study evaluates the LSM using three different spatial resolution of the digital elevation model (DEM) derived from three different sources. The data-driven traditional frequency ratio (FR) model was used for this study. The FR model was used for this research to assess the impact of the different spatial resolution of DEMs on the LSM. DEM data was derived from Advanced Land Observing Satellite-1 (ALOS) Phased Array type L-band Synthetic Aperture Radar (PALSAR) ALOS-PALSAR for 12.5 m, the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Global for 30 m, and the Shuttle Radar Topography Mission (SRTM) for 90 m. As an input, we used eight landslide conditioning factors based on the study area and topographic features of the Kullu valley in the Himalayas. The ASTER-Global 30m DEM showed higher accuracy of 0.910 compared to 0.839 for 12.5 m and 0.824 for 90 m DEM resolution. This study shows that that 30 m resolution is better suited for LSM for the Kullu valley region in the Himalayas. The LSM can be used for mitigation and future planning for spatial planners and developmental authorities in the region
Snow covered with dust after Chamoli rockslide: inference based on high-resolution satellite data
Get PDFThe high-resolution multi-temporal PlanetScope image of 7 February 2021 clearly shows the fall of a large part of the Nanda Ghunti glacier (Uttarakhand) down in the base of the valley from a height of about 2000 m. The recorded seismic signals at the local seismic networks, close to the Joshimath station, show the occurrence of the fall of the first glacier block followed by another block which corresponds to the seismic signal recorded the second time. The timings of signals recorded from the seismic station are related to the visual sign of local dust in the valley after the fall of the glacier blocks at 05:01 AM and 05:28 AM UTC on 7 February 2021. In the present paper, we carried out the changes in spectral signatures of PlanetScope imageries and backscattering coefficients from Sentinel-1 synthetic aperture radar (SAR) data at six different locations. Our analysis suggests pronounced changes at all locations based on spectral signatures and backscattering coefficients due to deposition of snow dust due to the fall of the glacier blocks. Changes in surface wetness are evident after the melting of snow due to the deposition of dust in the valley
Changes in the flood plains and water quality along the Himalayan rivers after the Chamoli disaster of 7 February 2021
Get PDFThe Himalayan regions are vulnerable to all kinds of natural hazards. On 7 February 2021, a deadly disaster occurred near the Tapovan, in Uttarakhand, Himalayas. During the event, large volume of debris along with broken glacial fragments flooded the Rishi Ganga River and washed away the nearby hydropower plants (Rishi Ganga and Tapovan), which was revealed from detailed analysis of multi spectral and bi-temporal satellite data. We present the impact of the Chamoli disaster on the flood plains and water quality of Himalayan rivers, Rishi Ganga near Tapovan, Alaknanda near Srinagar and Ganga near Haridwar and Bijnor. We used four locations along four sections of Himalayan rivers and have analysed various indices, modified normalized difference water index, normalized difference chlorophyll index, and normalized difference turbidity index, to study the changes in water quality and flood plains. On comparison of the spectral and backscattering coefficients derived from Sentinel-2 optical and Sentinel-1 synthetic aperture radar data, changes in the water quality and flood plains of the rivers were found
Chamoli disaster: pronounced changes in water quality and flood plains using Sentinel data
No full textThe Himalayan rivers are vulnerable to devastating flooding caused by landslides and outbreak of glacial lakes. On 7 February 2021, a deadly disaster occurred near the Rishi Ganga Hydropower Plant in the Rishi Ganga River, killing more than 100 people. During the event, a large volume of debris and broken glacial fragments flooded the Rishi Ganga River and washed away the Rishi Ganga Hydropower plant ongoing project. This study presents the impact of the Chamoli disaster on the water quality of Rishi Ganga River in upstream near Tapovan and Ganga River in downstream near Haridwar through remote sensing data. Five points have been used at different locations across the two study areas and three different indices were used such as Normalized difference water index (NDWI), Normalized difference turbidity Index (NDTI), and Normalized difference chlorophyll index (NDCI), to analyze changes in water quality. Spectral signatures and backscattering coefficients derived from Sentinel-2 Optical and Sentinel-1 Synthetic-aperture radar (SAR) data were also compared to study the changes in water quality. It was evident from the water quality indices and spectral signatures that the flood plains changed significantly. Using spectral signatures and different indices, the water level in the Chilla dam canal near Haridwar was found to decreased after the Chamoli disaster event as the flood gates were closed to stop the deposit of sediments in the canal. Results suggest changes in water quality parameters (turbidity, chlorophyll concentration, NDWI) at the five locations near the deadly site and far away at Haridwar along the Ganga River. This study is a preliminary qualitative analysis showing changes in river flood plain and water quality after the Chamoli disaster
A hybrid spatial multi-criteria evaluation method for mapping landslide susceptible areas in Kullu valley, Himalayas
Get PDFIn this paper we report our results from analysing a hybrid spatial multi-criteria evaluation (SMCE) method for generating landslide susceptibility mapping (LSM). This study is the first of its kind in the Kullu valley, Himalayas. We used eight related geospatial conditioning factors from three main groups: geological, morphological and topographical factors. Our landslide inventory dataset has a total of 149 GPS points of landslide locations, collected based on a field survey in July 2018. The relationships between landslide locations and conditioning factors were determined using the GIS-based statistical methods of frequency ratio (FR), multi-criteria decision-making (MCDM) and the integration method of hybrid SMCE. We compared the performance of applied methods by dividing the inventory into testing (70%) and validation (30%) datasets. The area under the curve (AUC) was used to validate the results. The integration method of hybrid SMCE gave the highest accuracy rate (0.910) compared to the other two methods, with 0.797 and 0.907 accuracy rates for the analytical hierarchy process (AHP) and FR, respectively. The applied methodologies are easily transferable to other areas, and the resulting landslide susceptibility maps (LSMs) can be useful for risk mitigation and development planning purposes in the Kullu valley, Himalayas
- …
