196,484 research outputs found
The Use of Glyburide Compared With Other Sulfonylureas and the Risk of Cancer in Patients With Type 2 Diabetes
No full textObjective: To determine whether the use of glyburide is associated with an increased risk of cancer compared with the use of other second-generation sulfonylureas among patients with type 2 diabetes.
Research design and methods: The U.K. Clinical Practice Research Datalink was used to conduct a cohort study among 52,600 patients newly prescribed glyburide or other second-generation sulfonylureas between 1 January 1988 and 31 July 2013. A time-dependent Cox proportional hazards model was used to estimate adjusted hazard ratios (HRs) and 95% CIs of any cancer associated with the use of glyburide compared with the use of second-generation sulfonylureas. Secondary analyses were conducted to determine whether the association varied with cumulative duration of use and cumulative dose (expressed as defined daily dose [DDD]).
Results: During 280,288 person-years of follow-up, 4,105 patients were given a new diagnosis of cancer (incidence rate 14.6 per 1,000 person-years). Overall, when compared with the use of other second-generation sulfonylureas, the use of glyburide was associated with a nonsignificant increased risk of any cancer (HR 1.09 [95% CI 0.98-1.22]). In secondary analyses, duration- and dose-response relationships were observed, with longer cumulative durations and cumulative doses associated with an increased risk of any cancer (>36 months: HR 1.21 [95% CI: 1.03-1.42]; >1,096 DDDs: HR 1.27 [95% CI 1.06-1.51]).
Conclusions: In this population-based cohort study, longer cumulative durations and higher cumulative doses of glyburide were associated with an increased risk of cancer
Dr. Duane M. Jackson, Morehouse College, July 2011
No full textThis video is a conversation with Dr. Duane M. Jackson. Dr. Jackson talks about his paper, "Recall and the Serial Position Effect: The Role of Primacy and Recency on Accounting Students' Performance." Jackie Daniel, AUC Woodruff Library, is the interviewer
"Reflections on the subject of Emigration from Europe with a view to Settlement in the United States" By M. Carey.
No full text"Reflections on the subject of Emigration from Europe with a view to Settlement in the United States: containing bried sketches of the moral and political character of those states.
By M. Carey, member of the American philosophical, and of the American Antiquarian Society, and author of The Olive Branch, Cindiciae Hibernicae, essays on banking, on political economy, and on internal improvement.
To which are now added the English editor's comments on the subject; together with Important Advice to Emigrants, and Cautions Against Impositions Practiced in the Outports
Dispelling the Myths Behind First-author Citation Counts
No full textWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
Dr. Glendon Swarthout
No full textHosted by Roger M. Busfield, MSU Assistant Professor of Speech and Theater, Meet the Author is designed to introduce a general audience to a contemporary author and their work through in-depth interviews. This episode features a conversation between Dr. Glendon Swarthout, prolific author and English professor at MSU, and assistant professors Sam S. Baskett and Theodore B. Strandness
Wyniki zastosowania metody promethee do wyboru systemu technologicznego w kopalni odkrywkowej Majdan III
No full textThis paper discusses the application of the PROMETHEE model and the results achieved in practice, following the example of the multi-criteria selection of the technological system at the Majdan III clay mineral raw material open pit mine of the Potisje Company, Republic of Serbia. After the introduction comments, reasons are explained for selecting the new technological system, conditions and limitations for the seven alternative solutions considered are described, mathematical foundation for the PROMETHEE method and a multi-criteria model of the problem in question are presented. The solution with the following structure was ranked first and accepted by the Company management as the best: Bucket chain excavator - Conveyor belts - Spreader (ECS), alongside a decision is made on the acquisition of machinery and system construction. The system was put into operation in 2000. The experience and the data accumulated in the previous twelve years confirm that the decision made on the application of the ECS technology was just, and the conclusion lists the benefits achieved.W artykule omówiono zastosowanie modelu Promethee i przedyskutowano uzyskane w ten sposób wyniki na przykładzie wielokryterialnego wyboru systemu technologicznego do zastosowania w kopalni odkrywkowej minerałów ilastych Majdan III, należącej do przedsiębiorstwa górniczego Potisje (Republika Serbii). Po uwagach wprowadzających przedstawiono powody wyboru nowego ciągu technologicznego, omówiono warunki oraz ograniczenia dla siedmiu alternatywnych rozwiązań, podstawy matematyczne metody Promethee oraz wielokryterialny model zagadnienia. Rozwiązanie uznane za najlepsze i zaaprobowane przez zarząd przedsiębiorstwa zakłada zastosowanie następującego ciągu technologicznego: koparka łancuchowa jednonaczyniowa - przenośniki taśmowe - rozkładarka(system ECS). Podjęto także decyzje odnośnie zakupu sprzętu i instalacji systemu, który uruchomiony został w 2000 roku. Doświadczenia i danezebrane z przeciągu ostatnich dwunastu lat potwierdzają zasadność wyboru systemu technologicznego. W podsumowaniu zestawiono listę uzyskanych korzyści
Simulation of thermal plant optimization and hydraulic aspects of thermal distribution loops for large campuses
No full textFollowing an introduction, the author describes Texas A&M University and its utilities system. After that, the author presents how to construct simulation models for chilled water and heating hot water distribution systems. The simulation model was used in a $2.3 million Ross Street chilled water pipe replacement project at Texas A&M University. A second project conducted at the University of Texas at San Antonio was used as an example to demonstrate how to identify and design an optimal distribution system by using a simulation model. The author found that the minor losses of these closed loop thermal distribution systems are significantly higher than potable water distribution systems. In the second part of the report, the author presents the latest development of software called the Plant Optimization Program, which can simulate cogeneration plant operation, estimate its operation cost and provide optimized operation suggestions. The author also developed detailed simulation models for a gas turbine and heat recovery steam generator and identified significant potential savings. Finally, the author also used a steam turbine as an example to present a multi-regression method on constructing simulation models by using basic statistics and optimization algorithms. This report presents a survey of the author??s working experience at the Energy Systems Laboratory (ESL) at Texas A&M University during the period of January 2002 through March 2004. The purpose of the above work was to allow the author to become familiar with the practice of engineering. The result is that the author knows how to complete a project from start to finish and understands how both technical and nontechnical aspects of a project need to be considered in order to ensure a quality deliverable and bring a project to successful completion. This report concludes that the objectives of the internship were successfully accomplished and that the requirements for the degree of Degree of Engineering have been satisfied
Intern experience at CH���M Hill, Inc.: an internship report
No full textIncludes author's vita"Submitted to the College of Engineering of Texas A&M University in partial
fulfillment of the requirement for the degree of Doctor of Engineering."Includes bibliographical referencesA review of the author's internship experience with CH���M HILL, Inc.
during the period September 1975 through May 1976 is presented. During this nine month
internship the author worked as an Engineer II in the Industrial Processes discipline of this
large consulting engineering firm... The author's prime responsibility was as one of three
lead design engineers on the design of a large wastewater treatment facility for a pulp mill
in Hoquiam, Washington owned by ITT Rayonier Inc. The work generally consisted of the design
of individual treatment units and associated piping and pumping. The purpose of the project
was to provide wastewater treatment capabilities that would satisfy the effluent limitations
(standards) imposed upon the mill by the State of Washington Department of Ecology and the
U.S. Environmental Protection Agency. The author's assignment also entailed necessary
interaction with the project manager and other CH���M HILL design engineers and support staff
members, the client's representatives, and representatives of two other consulting engineering
firms working on the project. Thus, the internship position at CH���M HILL provided considerable
experience coordinating the author's work with the work of other engineers, guiding the design
and administrative efforts of a support staff, and interacting regularly with the client and
other consulting firms. This broad exposure to a variety of engineering and organizational
problems provided a valuable educational experience
Transition to turbulence in a qblique shock-wave/boundary-layer interaction at M=15
No full textDirect numerical simulations are carried out for different forcing techniques to trigger transition during the interaction between an oblique shock-wave and a laminar boundary-layer at M = 1.5. Three forcing methods are used: a) forcing of oblique unstable modes, whose shape and behaviour are determined by the local linear stability theory, b) broadband free-stream acoustic disturbances, and c) a cold plasma flow control device. While the oblique-mode breakdown is dominant for low-amplitude forcing, long streaky structures drive the transition process in a high-amplitude disturbance environment. LES are also performed on the experimental setup by the Institute of Theoretical and Applied Mechanics (ITAM) from Novosibirsk State University with cold plasma actuation. As well as the disturbance type, the effect of Reynolds number and forcing amplitude will be investigated
Letter from Cedrick M. Shimo to the Office of Redress Administration, June 4, 1991
No full textA letter from Cedrick M. Shimo to the Office of Redress Administration arguing that John Y. Udaka is entitled to a redress payment.These materials are from box 73 and 74 of the Frank Chin Papers. The Frank Chin Papers contain personal and professional correspondence between Frank Chin and Michi Weglyn relating to particular projects on which either author was working as well as files related to the Day of Remembrance Tribute to Michi Weglyn
- …
