1,720,981 research outputs found
Sensitivity Analysis of Optical Metrics for Spectral Splitting Photovoltaic Systems: A Case Study
No full textSpectral splitting of sunlight to increase photovoltaic (PV) efficiency beyond the Shockley-Queisser limit has gained interest in recent years. Sensitivity analysis can be a useful tool for system designers to determine how much deviation from ideal conditions can be tolerated for different optical parameters. Understanding the origin of these sensitivities can offer insight into materials and device design. We employ 2-D TCAD simulations to analyze the sensitivity of system performance to two optical parameters: spectral fidelity (the fraction of photons directed to the intended material) and the spatial uniformity of illumination intensity. We analyze a system using crystalline silicon (Si) and cuprous oxide (Cu[subscript 2]O) as absorbers. We find that the spectral fidelity of the light directed to the Si cell has to be greater than 90% for the system to outperform a high-efficiency single-junction Si device. Varying the fidelity of the light directed to the Cu[subscript 2]O cell from 55% to 90% changes system efficiency by less than 10% relative. In some cases, increasing the fidelity of this light reduces system efficiency. We find no significant impact of spatial variation on length scales from 600 μm to 4.8 mm in devices with emitter sheet resistance less than 500 Ω/□.United States. Department of Defense. Assistant Secretary of Defense for Research & Engineering (Contract FA8721-05-C-0002)National Science Foundation (U.S.) (Contract ECCS-1102050)National Science Foundation (U.S.) (Singapore-MIT Alliance for Research and Technology (SMART))American Society for Engineering Education. National Defense Science and Engineering Graduate FellowshipNational Science Foundation (U.S.). Graduate Research Fellowship Progra
Beyond the Shockley-Queisser limit : intermediate band and tandem solar cells leveraging silicon and CdTe technology
No full textThesis: Ph. D., Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, 2016.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Cataloged from student-submitted PDF version of thesis. Page 156 blank.Includes bibliographical references (pages 141-153).The efficiencies of single-junction solar cells have been rapidly increasing and approaching their fundamental Shockley-Queisser efficiency limits. This is true for mature commercial technologies such as silicon and cadmium telluride. In order to enable solar cells with higher efficiency limits, new concepts need to be implemented which overcome the fundamental energy conversion mechanism limitations of single-junction solar cells. For this approach to be successful, it is advantageous to leverage existing manufacturing facilities and integrate these new solar cell architectures into commercially successful solar cell technologies such as silicon and cadmium telluride. In this thesis, two novel solar cell concepts are explored, categorized into three contributions. First, the application of intermediate band concept on silicon solar cells is explored by hyperdoping silicon, demonstrating room-temperature sub-band gap optoelectronic response from the material, and evaluating the feasibility of the intermediate band approach for improving silicon solar cell efficiency. Second, perovskite solar cells are integrated onto silicon solar cells to demonstrate mechanically-stacked perovskite/silicon tandem solar cell using low-cost silicon cell and monolithic perovskite/silicon tandem solar cell enabled by a silicon tunnel junction. Third, an analytic model is built to rapidly investigate the energy yield of different tandem solar cell architectures. When applied to cadmium telluride-based tandem solar cells, this model will help thin-film companies like First Solar narrow down the scope of future research and development programs on tandem solar cells.by Jonathan P. Mailoa.Ph. D
Anti-reflection zinc oxide nanocones for higher efficiency thin-film silicon solar cells
Get PDFThesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2012.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Cataloged from student submitted PDF version of thesis.Includes bibliographical references (p. 77-80).Thin film silicon solar cells, which are commonly made from microcrystalline silicon ([mu]c-Si) or amorphous silicon (a-Si), have been considered inexpensive alternatives to thick polycrystalline silicon (polysilicon) solar cells. However, the low solar efficiency of these thin film cells has become a major problem, which prevents thin film silicon cells from being able to compete with other solar cells in the market. One source of inefficiency is the light reflection off the interface between the thin film cell's top Transparent Conducting Oxide (TCO) and the light absorbing silicon. In this work, we demonstrate the use of nanocone textured ZnO as the anti-reflection surface that mitigates this problem. The tapered structure of the nanocone forms a smooth transition of refractive index on the interface between the TCO (ZnO) and the silicon, effectively acting as a wideband Anti-Reflection coating (AR coating). Finite Difference Time Domain simulation is used to estimate the optimal ZnO nanocone parameter (periodicity and height) to be applied on a single junction microcrystalline silicon ([mu]c-Si) solar cell. Relative improvement over 25% in optical performance is achieved in the simulated structure when compared to state-of-the-art [mu]c-Si cell structure. Cheap and scalable colloidal lithography method is then developed to fabricate ZnO nanocone with the desired geometry. Since the ZnO texturing technique works by depositing ZnO on nanocone-textured glass substrate, the technique is potentially applicable to Transparent Conducting Oxides other than ZnO as well, making it a useful TCO texturing technique for solar cell applications.by Jonathan P. Mailoa.M.Eng
Au-rich filamentary behavior and associated subband gap optical absorption in hyperdoped Si
No full textAu-hyperdoped Si, synthesized by ion implantation and pulsed laser melting, is known to exhibit a strong sub-band gap photoresponse that scales monotonically with the Au concentration. However, there is thought to be a limit to this behavior since ultrahigh Au concentrations (>1×10[superscript 20] cm[superscript −3]) are expected to induce cellular breakdown during the rapid resolidification of Si, a process that is associated with significant lateral impurity precipitation. This work shows that the cellular morphology observed in Au-hyperdoped Si differs from that in conventional, steady-state cellular breakdown. In particular, Rutherford backscattering spectrometry combined with channeling and transmission electron microscopy revealed an inhomogeneous Au distribution and a subsurface network of Au-rich filaments, within which the Au impurities largely reside on substitutional positions in the crystalline Si lattice, at concentrations as high as ∼3 at. %. The measured substitutional Au dose, regardless of the presence of Au-rich filaments, correlates strongly with the sub-band gap optical absorptance. Upon subsequent thermal treatment, the supersaturated Au forms precipitates, while the Au substitutionality and the sub-band gap optical absorption both decrease. These results offer insight into a metastable filamentary regime in Au-hyperdoped Si that has important implications for Si-based infrared optoelectronics
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
- …
