1,720,992 research outputs found
Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion
Get PDFA CoCrFeNiMn high-entropy alloy (HEA) was processed by high-pressure torsion (HPT) under 6.0 GPa pressure up to 10 turns at room temperature. It is shown that there is a gradual evolution in hardness with increasing numbers of turns but full homogeneity is not achieved even after 10 turns. Microhardness measurements reveal that the material reaches a saturation hardness value of ~4.41 GPa and in this condition the microstructure shows exceptional grain refinement with a grain size of ~10 nm. An ultimate strength value of ~1.75 GPa and an elongation to fracture of ~4% were obtained in a sample processed for 5 turns. The nanostructured HEA was subjected to post-deformation annealing (PDA) at 473-1173 K and it is shown that the hardness increases slightly to 773 K due to precipitation and then decreases up to 1173 K due to a combination of recrystallization, grain growth and a dissolution of the precipitates. The formation of brittle precipitates, especially ?-phase, at 873 and 973 K significantly reduces the ductility. Short-term annealing for 10 min at 1073 K prevents grain growth and leads to a combination of high strength and good ductility including an ultimate tensile strength of ~830 MPa and an elongation to failure of ~65%
Evidence for superplasticity in a CoCrFeNiMn high-entropy alloy processed by high-pressure torsion
Get PDFA CoCrFeNiMn high-entropy alloy was processed by high-pressure torsion to produce a grain size of ~10 nm and then tested in tension at elevated temperatures from 773 to 1073 K using strain rates in the range from 1.0×10?3 to 1.0×10?1 s?1. The alloy exhibited excellent ductility at these elevated temperatures including superplastic elongations with a maximum elongation of >600% at a testing temperature of 973 K. It is concluded that the formation of precipitates and the sluggish diffusion in the HEA inhibit grain growth and contribute to a reasonable stability of the fine-grained structure at elevated temperatures. The results show the activation energy for flow matches the anticipated value for grain boundary diffusion in nickel but the strain rate sensitivity is low due to the occurrence of some grain growth at these high testing temperature
Microstructure and properties of a CoCrFeNiMn high-entropy alloy processed by equal-channel angular pressing
No full textA CoCrFeNiMn high-entropy alloy (HEA) was processed by equal-channel angular pressing (ECAP) for up to four passes at 673 K and the results show that the strength increases gradually with increasing straining up to ~1 GPa with an elongation to failure of ~35% after four passes of ECAP. In this condition, the microstructure is a single-phase ultrafine-grained (UFG) CoCrFeNiMn HEA with an average grain size of ~100 nm and a high dislocation density. This UFG HEA was subjected to post-deformation annealing (PDA) at temperatures of 673-1073 K for 60 min and it is shown that the hardness increases slightly due to precipitation to 773 K and then decreases to 1073 K due to a combination of recrystallization, grain growth and a dissolution of precipitates. The formation of brittle σ-phase precipitates improves the strength significantly but with a minor decrease in ductility. Annealing at the peak temperature of 773 K produces a very high yield strength of ~1015 MPa and an ultimate strength of ~1080 MPa together with an excellent elongation to failure of ~30%. An analysis of the data shows that grain boundary strengthening is the most important strengthening mechanism in these ECAP samples both before and after PDA
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
