306,935 research outputs found
Impact of Ramped Vanes on Normal Shock Boundary-Layer Interaction
No full textLarge-eddy simulations of a vortex generator embedded upstream of a normal shock boundary-layer interaction followed by a subsonic diffuser were conducted. In particular, the ""ramped-vane"" flow control device was placed in a supersonic boundary layer with a freestream Mach number of 1.3 and a Reynolds number of 2400 based on momentum thickness. The ramped vane had a height of 0.52 delta and generated strong streamwise vorticity that entrained the high-momentum flow to the near-wall region. This contributed to decreasing the shock-induced flow separation while significantly increasing the skin friction coefficient in the diffuser where a strong adverse pressure gradient was present. In addition, it was found that the high-momentum flow persisted far downstream of the shock interaction region, which yielded reductions of both the displacement thickness and the shape factors compared to the uncontrolled case.
Supersonic boundary-layer interactions with various micro-vortex generator geometries
No full textVarious types of micro-vortex generators (mu VGs) are investigated for control of a supersonic turbulent boundary layer subject to an oblique shock impingement, which causes flow separation. The micro-vortex generators are embedded in the boundary layer to avoid excessive wave drag while still creating strong streamwise vortices to energise the boundary layer. Several different types of mu VGs were considered including micro-ramps and micro-vanes. These were investigated computationally in a supersonic boundary layer at Mach 3 using monotone integrated large eddy simulations (MILES). The results showed that vortices generated from mu VGs can partially eliminate shock induced flow separation and can continue to entrain high momentum flux for boundary-layer recovery downstream. The micro-ramps resulted in thinner downstream displacement thickness in comparison to the micro-vanes. However, the strength of the streamwise vorticity for the micro-ramps decayed faster due to dissipation especially after the shock interaction. In addition, the close spanwise distance between each vortex for the ramp geometry causes the vortex cores to move upwards from the wall due to induced upwash effects. Micro-vanes, on the other hand, yielded an increased spanwise spacing of the streamwise vortices at the point of formation. This resulted in streamwise vortices staying closer to the floor with less circulation decay, and the reduction in overall flow separation is attributed to these effects. Two hybrid concepts, named 'thick-vane' and 'split-ramp', were also studied where the former is a vane with side supports and the latter has a uniform spacing along the centreline of the baseline ramp. These geometries behaved similar to the micro-vanes in terms of the streamwise vorticity and the ability to reduce flow separation, but are more physically robust than the thin vanes.
Going Beyond Counting First Authors in Author Co-citation Analysis
No full textThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Normal shock boundary layer control with various vortex generator geometries
No full textVarious vortex generators which include ramp, split-ramp and a new hybrid concept ""ramped-vane"" are investigated under normal shock conditions with a diffuser at Mach number of 1.3. The dimensions of the computational domain were designed using Reynolds Average Navier-Stokes studies to be representative of the flow in an external-compression supersonic inlet. Using this flow geometry, various vortex generator concepts were studied with Implicit Large Eddy Simulation. In general, the ramped-vane provided increased vorticity compared to the other devices and reduced the separation length downstream of the device centerline. In addition, the size, edge gap and streamwise position respect to the shock were studied for the ramped-vane and it was found that a height of about half the boundary thickness and a large trailing edge gap yielded a fully attached flow downstream of the device. This ramped-vane also provided the largest reduction in the turbulent kinetic energy and pressure fluctuations. Additional benefits include negligible drag while the reductions in boundary layer displacement thickness and shape factor were seen compared to other devices. (C) 2011 Elsevier Ltd. All rights reserved.
Dispelling the Myths Behind First-author Citation Counts
No full textWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
Desafios e vivências com a maternidade: olhar de estudantes negras em universidades públicas
No full textNAHANA, Belina Loth. Desafios e vivências com a maternidade: olhar de estudantes negras em universidades públicas. 2022. 23 f. Trabalho de Conclusão de Curso (Bacharelado em Humanidades) - Instituto de Humanidades e Letras dos Malês, Universidade da Integração Internacional da Lusofonia Afro-Brasileira, São Francisco do Conde, 2022
HandCT: hands-on computational dataset for X-Ray Computed Tomography
No full textHandCT is a computational dataset to train machine-learning models for X-Ray Computed Tomography (CT). It consists of a meshed hand model, of which pose and anatomical properties are computed at run-time from a script. As such, it is an accurate modeling of anatomical phantoms of only 1.35 mB, and reproducibility is ensured using random seeds. It allows the user to have full control over the imaging chain, from projection to reconstruction, and over the X-Ray interaction with the different parts of the model by a simple variable editing. This open-source solution relies on the freeware Blender for the modelling and Python for the computations. The first deals with modelling, rigging and deformations, whilst the later ensures transformations such as scaling, translation, or else forward projection. This dataset can be used to train and evaluate regularisation procedures for low-energy, dual-energy and scarce-view CT.</span
Author, publisher and bookseller : a tripartite synergy in Nigerian book industry
No full textThis work is about the roles of Author, Publisher and Bookseller in Book development in
Nigeria. The paper started by delving into the history of Book Publishing in Nigeria after
which it proceeded by defining who an author, a publisher, and a bookseller is and
expatiated on the indispensable roles of these key actors in Nigerian Book Industry and in
the emerging Information Society. Furthermore, the various constraints to book
development were identified while the paper advised on how the Book Industry can be
further promoted in Nigeria. However, the paper concluded and made recommendations
on how the Book sector can help in enhancing scholarship in the country
- …
