1,720,964 research outputs found
Synthesis of Fatty Alcohol-Based Phosphate Esters
Full text linkFatty chemicals based on edible and inedible tallow and a variety of vegetable oils have wide use in plastics industry. At present, there are some limitation and economic competition between plastics additives based on fats and oils and those from fossil fuels (crude oil and natural gas). The large growth of palm oil production in Malaysia and the rapid expansion of oleochemical production facilities in Malaysia imply strong growth for these chemicals in plastics application in the recent years. Oleochemicals has been reported being large used as emulsifiers and stabilizer in polymerization, as auxiliarities for processing and as structural materials in plastics industry. A preliminary study carried out has shown the compatibility between inorganic fillers (calcium carbonate, CaCO3) and the polyvinylchloride resins (PVC) can be improved by adding oleochemical-based surfactant to the CaCO3, prior to its mixing with the plastic resins. A more homogeneous mixture was obtained, thus better PVC plastics was produced. This research was therefore undertaken to synthesize fatty alcohol-based phosphate ester using fatty alcohol as the starting material to be used as the coupling agent for the CaCO3 and plastics resins. In this study, the syntheses were carried out in three different routes and each route were divided into three steps. Fatty alcohol-based phosphate esters with diphosphate ester functional group were prepared by reacting a diol with phosphorus oxychloride (POCl3) and then followed by addition of long-chained fatty alcohol.
In route one, C16-fatty alcohol was used in the synthesis. The optimized reaction temperatures for each step of reaction in this route were 20 °C, 35 ºC and 70 ºC respectively. The reaction duration of each step was about 3 hours. Excess of phosphorus oxychloride (2.5 mole) was used and 0.1% (w/w) of catalyst tetrabutyl orthotitanate (based on the weight of fatty alcohol) was employed in the synthesis. The percentage yield of the final product obtained from the titration of acidic solution (HCl gas in distilled water) with NaOH solution was about 60 %. From the GC, GC-MS, LC and LC-MS analyses, monophosphate ester (dipropyl heptadecyl phosphate ester) with the percentage of about 4.8% was obtained. While, the major compounds obtained were 1,6-dichlorohexane and 1-chlorohexadecane with the total percentage ~ 70%.
In route two and three, the reactions were carried out under the reaction temperature of 20 °C, 90 ºC and 90 ºC for each step of the reaction respectively. The optimized reaction duration for each step was 2 hours, 2 hours and 1 hour respectively. In these syntheses, excess of phosphorus oxychloride (2.5 mole) was also used but no catalyst was applied in the reaction. The fatty alcohol used in route three was different with route one and two, whereby C18-fatty alcohol was used. The percentage yield of the final product obtained under these conditions was about 10-40% (by titration method). From the GC-MS and LC-MS analyses, the major compounds obtained from the synthesis were also 1,6-dichlorohexane and 1-chlorohexadecane which gave a total yield of ~74.06%. The phosphate ester obtained in this synthesis was a diphosphate ester (trihexadecyl hexyl diphosphate ester) with the percentage of about ~ 2.5%.
Finally the products obtained were applied in PVC compounding. Some basic formulations were prepared, which comprised the synthesized phosphate ester (PE/T10), PVC resin, plasticizer (DOP), stabilizer (TBLS) and calcium carbonate as filler (CaCO3). The mixture of these polymers and additives was blended at 170 ºC with a mixing speed of 70 r.p.m. The homogenized plasticized mixture was then compressed on a hot press at 170 ºC for 10 min. Based on the tensile strength results, a slight decreased in the tensile properties was observed when the ester sample was added into the PVC compounding which could be due to the presence of chlorinated compound present as indicated by the analyses. The chlorinated compound may have reacted with the filler (CaCO3) during the PVC compounding process and thus causing the decreased in tensile strength of the plastic sheets. However, in general, the physical appearance of the PVC sheet could be improved by the synthesized phosphate ester (PE/T10) after further dried with anhydrous calcium sulphate whereby a smooth surface was observed compared to the PVC sheet without added of phosphate ester (PE/T10)
Study of glycerol electrochemical conversion into addes-value compounds
Full text linkThe price of crude glycerol has significantly decreased worldwide because of its oversupply. Many chemical and biological processes have been proposed to transform glycerol into numerous value-added products, such as glycolic acid, 1,3-propanediol (1,3-PDO), 1,2-propanediol (1,2-PDO), glyceric acid, and lactic acid. However, these processes suffer from several drawbacks, including high production cost. Therefore, in this study, a simple and robust electrochemical synthesiswas developed to convert glycerol into various value-added compounds. This study reports for the first time the use of Amberlyst-15 as a reaction mediumand redox catalyst for electrochemical conversion of glycerol. In the first part, the electrochemical performance of Amberlyst-15 over platinum (Pt)electrode was compared with that of conventional acidic (H2SO4) and alkaline (NaOH) media. Other parameters such as reaction temperature [room temperature (27°C) to 80 °C] and applied current (1.0 A to 3.0 A) were also examined. Under the optimized experimental condition, this novel electrocatalytic method successfully converted glycerol into glycolic acid after 8 h of electrolysis, with a yield of 45% and selectivity of 65%, as well as to glyceric acid after 3 h of electrolysis, with a yield of 27% and selectivity of 38%. In the second part of this study, two types of cathode electrodes, namely, activated carbon composite(ACC) and carbon black diamond (CBD) electrodes, were used in electrochemical conversion of glycerol. To the best of our knowledge, electrochemical studies of glycerol conversion using these electrodes have not been reported yet. Glycerol was also successfully reduced to lactic acid, 1,2-PDO, and 1,3-PDO, in addition to oxidation compounds (e.g. glycolic acid). Three operating parameters, namely, catalyst amount (6.4% to 12.8% w/v), reaction temperature [room temperature (27 °C) to 80 °C], and applied current (1.0 A to 3.0 A), were tested. In the presence of 9.6% w/v Amberlyst-15 at 2.0 A and 80 °C, the selectivity of glycolic acid can reach 72% and 68% (with yield of 66% and 58%) for ACC and CBD electrodes, respectively. Lactic acid was obtained as the second largest compound, withselectivity of 16% and yield of 15% for the ACC electrode and 27% selectivity and 21% yield for the CBD electrode. Finally, electro-oxidation and electroreduction of glycerol were performed in a two-compartment cell separated by a cation exchange membrane (Nafion 117). This study only focused on the electroreduction region. Three cathode electrodes (Pt, ACC, and CBD) were evaluated under the following conditions: 2.0 A, 80 °C, and 9.6% w/v Amberlyst-15. ACC demonstrated excellent performance in the electroreduction study and successfully reduced glycerol to 1,2-PDO, with a high selectivity of 85%. The selectivity of 1,2-PDO on Pt and CBD was 61% and 68%, respectively. Acetol and diethylene glycol were also obtained. The reaction mechanisms underlying the formation of these products are then proposed
Étude de la conversion électrochimique du glycérol en différents composés à haute valeur ajoutée
No full textAu cours des dernières années, la production excédentaire et sans cesse croissante de bioglycérol a provoqué une chute spectaculaire de son prix. Au cours des dernières années, un grand nombre de processus chimiques et biologiques ont été élaborés pour transformer le bioglycérol en divers produits à haute valeur ajoutée, tels que la dihydroxyacétone, l'acide glycolique, le 1,3-propanediol (1,3-PDO), 1,2-propanediol (1,2-PDO), l'acide glycérique, l'acide lactique, le carbonate de glycérol etc. Malheureusement, ces procédés souffrent de nombreux inconvénients comme par exemple, un coût élevé de production. Par conséquent, dans cette étude, une synthèse simple et robuste, basée sur un processus électrochimique a été introduite afin de convertir le bioglycérol en une grande variété de composés à haute valeur ajoutée. Cette étude rapporte pour la première fois l'utilisation de la résine Amberlyst-15 comme milieu réactionnel et comme catalyseur d'oxydo-réduction pour la conversion électrochimique du glycérol. La performance électrochimique du système composé par la résine Amberlyst-15 et l’électrode au platine (Pt), a été comparée à celle utilisant un milieu électrolytique conventionnel acide (H2SO4) ou alcalin (NaOH). D'autres paramètres tels que la température de réaction (température ambiante à 80 °C) et l’intensité du courant appliqué (1,0 A à 3,0 A) ont également été examinés. Dans les conditions expérimentales optimales, ce nouveau procédé électrocatalytique permet de convertir le glycérol, soit en acide glycolique, avec un rendement de 45% et une sélectivité élevée de 65%, soit en acide glycérique, avec un rendement de 27% et une sélectivité de 38%. D’autre part, deux autres électrodes ont été préparées et testées dans la réaction de transformation du glycérol : une électrode au charbon actif (ACC) et une électrode composite au noir de carbone et diamant CBD). A notre connaissance, il n’existe pas dans la littérature d’étude de transformation électrochimique du glycérol utilisant ce type d’électrodes. Dans ce travail, nous avons montré que le glycérol peut être oxydé en divers composés d’oxydation mais peut également être réduit avec succès en acide lactique,1,2-PDO et 1,3-PDO. Trois paramètres de fonctionnement, tels que la quantité de catalyseur (6.4 -12.8% w/v), la température de réaction [température ambiante (27°C) à 80 °C] et l’intensité du courant appliqué (1,0 A à 3,0 A), ont été testés. L'étude a révélé que, pour une quantité de catalyseur 9.6% w/v Amberlyst-15, un courant de 2,0 A et une température de 80 °C, la sélectivité en acide glycolique peut atteindre jusqu'à 72% et 68% (avec un rendement de 66% et 58%) en utilisant respectivement l’électrode ACC et l’électrode CBD. L'acide lactique a aussi été obtenu avec une sélectivité de 16% et un rendement de 15% en utilisant l’électrode ACC et une sélectivité de 27% pour un rendement de 21% dans le cas de l'électrode CBD. Enfin, l'électrooxydation et l'électro-réduction du glycérol a été effectuée dans une cellule à deux compartiments séparés par une membrane échangeuse de cations (Nafion 117). L’étude s’est focalisée sur l’électro-réduction. Trois cathodes (Pt, ACC et CDB) ont été évaluées dans les conditions suivantes : 2.0 A, 80 °C et 9.6% w/v Amberlyst-15. Les trois électrodes ont permis de réduire le glycérol en 1,2-PDO. Nous avons obtenu une sélectivité de 61% avec l’électrode au Pt et une sélectivité de 68% avec L’électrode CBD. En fait, c’est l’électrode ACC qui a démontré les meilleures performances puisqu’elle a permis de réduire le glycérol en 1,2-PDO avec une sélectivité élevée de 85%. Enfin, la réaction conduit aussi à la formation d’acétol et de diéthylèneglycol. Les mécanismes de formation des différents produits obtenus à partir de chaque réaction sont proposés.The price of crude glycerol has significantly decreased worldwide because of its oversupply. Many chemical and biological processes have been proposed to transform glycerol into numerous value-added products, such as glycolic acid, 1,3-propanediol (1,3-PDO), 1,2-propanediol (1,2-PDO), glyceric acid, and lactic acid. However, these processes suffer from several drawbacks, including high production cost. Therefore, in this study, a simple and robust electrochemical synthesiswas developed to convert glycerol into various value-added compounds. This study reports for the first time the use of Amberlyst-15 as a reaction mediumand redox catalyst for electrochemical conversion of glycerol. In the first part, the electrochemical performance of Amberlyst-15 over platinum (Pt)electrode was compared with that of conventional acidic (H2SO4) and alkaline (NaOH) media. Other parameters such as reaction temperature [room temperature (27°C) to 80 °C] and applied current (1.0 A to 3.0 A) were also examined. Under the optimized experimental condition, this novel electrocatalytic method successfully converted glycerol into glycolic acid after 8 h of electrolysis, with a yield of 45% and selectivity of 65%, as well as to glyceric acid after 3 h of electrolysis, with a yield of 27% and selectivity of 38%. In the second part of this study, two types of cathode electrodes, namely, activated carbon composite(ACC) and carbon black diamond (CBD) electrodes, were used in electrochemical conversion of glycerol. To the best of our knowledge, electrochemical studies of glycerol conversion using these electrodes have not been reported yet. Glycerol was also successfully reduced to lactic acid, 1,2-PDO, and 1,3-PDO, in addition to oxidation compounds (e.g. glycolic acid). Three operating parameters, namely, catalyst amount (6.4% to 12.8% w/v), reaction temperature [room temperature (27 °C) to 80 °C], and applied current (1.0 A to 3.0 A), were tested. In the presence of 9.6% w/v Amberlyst-15 at 2.0 A and 80 °C, the selectivity of glycolic acid can reach 72% and 68% (with yield of 66% and 58%) for ACC and CBD electrodes, respectively. Lactic acid was obtained as the second largest compound, withselectivity of 16% and yield of 15% for the ACC electrode and 27% selectivity and 21% yield for the CBD electrode. Finally, electro-oxidation and electroreduction of glycerol were performed in a two-compartment cell separated by a cation exchange membrane (Nafion 117). This study only focused on the electroreduction region. Three cathode electrodes (Pt, ACC, and CBD) were evaluated under the following conditions: 2.0 A, 80 °C, and 9.6% w/v Amberlyst-15. ACC demonstrated excellent performance in the electroreduction study and successfully reduced glycerol to 1,2-PDO, with a high selectivity of 85%. The selectivity of 1,2-PDO on Pt and CBD was 61% and 68%, respectively. Acetol and diethylene glycol were also obtained. The reaction mechanisms underlying the formation of these products are then proposed
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
