1,720,968 research outputs found
Studies On Application Of Control Systems For Urban Water Networks
No full textManagement and supply of water in an urban water distribution system is a complex process, which include various complexities like pressure variations across the network depending on topography, demand variations depending on customers’ requirement and unaccounted water etc. Applying automatic control methods to water distribution systems is a way to improve the management of water distribution. There have been some attempts in recent years to develop optimal control algorithms to assist in the operation of complex water distribution systems. The difficulties involved by these hydraulic systems such as non-linearity, and diurnal demand patterns make the choice of a suitable automatic control method a challenge. For this purpose, this study intends to investigate the applicability of different controllers which would be able to meet the targets as quickly as possible and without creating undue transients.
As a first step towards application of different controllers, PD and PID linear controllers have been designed for pump control and valve control in water distribution systems. Then a Dynamic Inversion based nonlinear controller has been designed by considering the non-linearities in the system. Here, different cases considering the effects of initial conditions used, linearization methods used, time step used for integration and selection of gains etc., have been studied before arriving at best controller. These controllers have been designed for both the flow control problems and level control problems. It is found that Dynamic Inversion-based nonlinear controller outperforms other controllers.
It is well known that the performance of controllers is much dependent on the tuning of the gains (parameters). Thus in this study various alternative techniques such as Ziegler--Nichols rules (ZNPID), Genetic algorithms (GAPID) and fuzzy algorithms (FZPID) have been studied and a comparative study has been made Although with all the three gain tuning methods, required states have reached their target values, but the responses vary much in reaching to final targets. The self-tuned FZPID controller outperforms other two controllers, especially with regard to overshoots and the time taken to tune the gains for each problem.
Further, an optimal DI controller is developed for the over determined case with more controls and less targets. Energy loss is considered as an objective function and normal DI controller equations are considered as constraints. Hence, an attempt is made to reduce the energy minimization in water distribution system by formulating an optimal control problem using optimal Dynamic Inversion concept.
Finally, leakage reduction model is developed based on excessive pressure minimization problem by locating valves optimally as well as by setting valves optimally. For this purpose, optimization problem is solved using Pattern search algorithms and hydraulic analysis is carried out using EPANET program
Field Investigations And Modeling of Flow in Vadose Zone in a Forested Watershed
Get PDFThe vadose zone is the unsaturated zone between the ground surface and water table. This zone is of much importance as it acts as a link between surface water and ground water. Knowledge of soil moisture in this zone is very much essential to understand the meteorologic, hydrologic and agronomic process. Flow and transport in the unsaturated zone are more complex compared to saturated medium, as the pores in unsaturated zone are partly filled by air and partly by water. Most of vadose zone studies are done on agricultural plots where anthropogenic activities govern the vadose zone flows. Vadose zone studies in natural pristine conditions such as in forested areas where no anthropogenic activities are present are very limited that too in Indian conditions are rare.
The present research work deals with understanding of the flow behavior in the vadose zone in a small experimental forested watershed called Mule Hole. Mule Hole watershed is 4.5 km2 and located in Bandipur National Park in Chamrajnagar District of Karnataka state, in the southern part of India. The forest is of deciduous type with 3 to 4 months of leafless dry period. The watershed has mean annual 25 years rainfall of 1120 mm and mean yearly temperature is 27o. The rainfall pattern is bimodal i.e. it receives rainfall during South West Monsoon (June
-September) and North East Monsoon (October – December) with dominant rainfall occurring during South West Monsoon. Human activity is minimal as watershed is a part of Bandipur National Park, dedicated to wildlife and biodiversity preservation. The watershed consists of around 80 % of red soils, and black soil and saprolite covering the rest. The first part of the study involves soil moisture measurements by neutron probe and electrical resistivity measurements by geophysical method and their linking, i.e. developing volumetric soil moisture vs electrical resistivity relationship. The second part of the study involves application of neutron probe soil moisture measurement in identifying relationship between soil and erosion in the watershed. The third part involves development of two dimensional (2D) vadose zone model for watershed and validating it with measured data. The last part involves development of three dimensional model of watershed and validating it with observed data.
Vadose zone is briefly described in chapter 1 along with its governing equations. Different soil moisture measurement techniques including invasive and non – invasive ones are also discussed. Different vadose zone modeling software which are public domain as well as commercial ones are also discussed. The chapter ends with organization of this thesis.
Chapter 2 reviews relevant literature related to this study with focus on soil moisture measurement techniques and vadose zone flow modeling. Different soil moisture measurement techniques, their applications and limitations are reviewed. In the soil moisture measurement techniques, invasive and non – invasive types are reviewed. In the modeling part, different vadose zone models for 2D and 3D flow along with its applications and limitations are reviewed. Also a brief review about application of HYDRUS 2D/3D model is done which is used for the vadose zone modeling in this thesis.
Chapter 3 introduces study area Mule Hole watershed, which is a forested watershed located in Bandipur National Park, Karnataka. India. The watershed has mean annual 25 years rainfall of 1120 mm and mean yearly temperature is 27o. The watershed has average regolith thickness or vadose zone of 17 m with roots of the trees able to penetrate up to groundwater. A toposequence T1 is identified in the watershed which has red soil – black soil confluence where soil moisture measurements and electrical resistivity measurements are carried out. The toposequence consists of 8 layers with organic layer forming the top layer followed by 3 red soil layer with 2 black soil layers intruding from stream into red soil layers and sandy weathered horizon at base of red and black soil. Also a sandy horizon at the top of black soil. Soil moisture measurements with neutron probe and electrical resistivity measurements with electrical logging tool which are done on toposequence periodically for two years are explained and the data are presented in this chapter. These data are used for validation of vadose zone models.
Chapter 4 discusses in detail about comparison of electrical resistivity by geophysical method and neutron probe logging for soil moisture monitoring in a forested watershed. The electrical resistivity data and soil moisture data are compared for different soils and existence of relationship between them are studied and discussed in this chapter. For the red soil, existence of relationship between volumetric soil moisture content and electrical resistivity is found.
Chapter 5 discusses soil moisture measurements as a tool to study erosion processes in forested watershed. Hydrodynamic behavior of the red soil – black soil system at toposequence T1 is studied using neutron probe soil moisture measurements. Two distinctive types of erosional landforms have been identified at T1 viz, rotational slips (Type 1); seepage erosion (Type 2),which are highlighted by neutron probe soil moisture measurements. Based on the observations relative chronology of formulation of different soil horizons are studied, which guided in developing four-stage model showing the relative chronology in the recent formation of the soil cover at downslope.
Chapter 6 discusses application of 2D vadose zone modeling using HYDRUS – 2D model at two experimental sites in forested watershed where soil moisture monitoring and groundwater monitoring have been conducted. At the first site, which is toposequence T1 in the forested watershed, where soil moisture measurements are done, three case studies for comparison of daily scale data with hourly scale data and effects of internal layering by clubbing red soil layers and black soil layers to equivalent red soil and black soil layers respectively are performed. The model is run for two years. In that, first year results are used for calibrating the model where measured soil moisture content data are used to get soil hydraulic parameters for all the three cases by inverse modeling using Marquardt – Levenberg algorithm which is a part of HYDRUS 2D. The parameters thus obtained fall under particular soil range and performed efficiently in predicting soil moisture content. The second year results of model run is used for validation of the model in all the three cases where simulated soil moisture content is compared with measured soil moisture content. It is found that model is performing well and match between measured and simulated soil moisture contents is good in all the three cases. It can be said that having hourly scale data with detailed layering information is always advantageous in modeling soil moisture content. But, in absence of hourly scale data or finer scale data and absence of detailed layering information, the soil moisture model can also perform well. The scale of data and detailed layering information has minimal effect on soil moisture modeling. At the second site ERT profile near the watershed outlet has five monitoring wells are available and all layering information regarding regolith and hard rock layer distribution profiles. The soil hydraulic parameters obtained at toposequence T1 for soil and sandy weathered horizon are used and tested at this site to simulate the groundwater levels. The parameter for rock layer is estimated by testing different hydraulic parameters from HYDRUS database. The results are validated using observed groundwater levels at the site. The results show significant match between observed and simulated groundwater levels.
Chapter 7 discusses 3D modeling of Mule Hole forested watershed using HYDRUS – 3D model. A three layer model of Mule Hole along with its topographic details is modeled. The layering information is derived from geophysical study done at 12 Electrical Resistivity Tomography (ERT) profiles distributed in the watershed. The three layers considered are top soil layer followed by sandy weathered layer and bottom rock layer. Anisotropy in hydraulic conductivity, root water uptake and sloping water table are introduced to make the model more realistic. Soil hydraulic parameters obtained during 2D vadose zone modeling of toposequence T1 are used initially for soil and sandy weathered layers and are subsequently tuned to make model more efficient. Different scenarios are considered to test flux as well as constant head boundary conditions and effect of different porosities for rock layer. The model is run for 7 years and model simulations are validated with observed groundwater levels from monitoring wells across the watershed. The result shows good fit between simulated and observed groundwater levels especially for monitoring well which has shallow groundwater level. It is found that porosity in the rock layer is not uniform and there exist different porosities for the rock layer across the watershed. Also the distribution of sandy weathered zone requires improvement. The model is also able to predict ET closer to ET predicted by COMFORT model which was developed earlier. Also the model shows rise in groundwater fluxes as groundwater starts replenishing. Over all, the 3D model of Mule Hole watershed in HYDRUS – 3D worked well with satisfactory results and HYDRUS – 3D can be used for modeling small forested watersheds.
Chapter 8 concludes the study and discusses the further scope of the work
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
Author-wise bibliometric analysis based on entropy.
No full textAuthor-wise bibliometric analysis based on entropy.</p
- …
