31,747 research outputs found

    Natural operators on frame bundles

    Get PDF
    summary:Let F1F_1 be a natural bundle of order r1r_1; a basis of the ss-th order differential operators of F1F_1 with values in r2r_2-th order bundles is an operator DD of that type such that any other one is obtained by composing DD with a suitable zero-order operator. In this article a basis is found in the following two cases: for F1=semiFr1F_1=\text{semi} F^{r_1} (semi-holonomic r1r_1-th order frame bundle), s=0s=0, r2<r1r_2<r_1 and F1=F1F_1=F^1 (11-st order frame bundle), r2sr_2\le s. The author uses here the so-called method of orbit reduction which provides one with a criterion for checking a basis in terms of the Knr1+s,r2K^{r_1+s,r_2}_n-action on the type fiber of the concerned bundle, where Knr1+s,r2K^{r_1+s,r_2}_n denotes the kernel of the projection of the (n,r1+s)(n,r_1+s) jet group onto the (n,r2)(n,r_2) jet group [see I. Kolár, P. Michor and J. Slovák, `Natural operations in differential geometry' (Springer-Verlag, Berlin) (1993; Zbl 0782.53013) or D. Krupka, Loc

    author-bios-SRD-19-0063.R1 – Supplemental material for The Network Structure of Police Misconduct

    No full text
    Supplemental material, author-bios-SRD-19-0063.R1 for The Network Structure of Police Misconduct by George Wood, Daria Roithmayr and Andrew V. Papachristos in Socius</p

    Sculpture activity of Martin Krupka; Restaurování of the stone sculpture St. Jan Nepomucký from Kostelec u Jičína

    No full text
    T: Tato práce mapuje sochařské dílo východočeského tvůrce Martina Krupky. Soustředí se na okruh dosud neznámých prací, vzniklých v oblasti šlikovských panství v okolí Veliše a Kopidlna. Vymezí charakteristiku Krupkovy tvorby, zvláště v souvislosti se skupinou řezeb v interiéru kostela sv. Václava ve Veliši a skupinou skulptur před tímtéž kostelem. Jádrem práce bude vymezení sochařských postupů, kompozic a dalších tvůrčích aspektů Krupkova díla v letech 1750 - 1775. P: Tato práce popisuje a dokumentuje konzervátorský a restaurátorský zásah provedený na kamenné soše sv. Jana Nepomuckého obce Kostelce. V jednotlivých bodech je popsána historie památky, ikonografie světce včetně úvahy o umělecké hodnotě díla a jeho autorství. Dále je zde popsán stav před restaurováním památky, kompletní chemicko - technologický průzkum a popis jednotlivých postupů samotného restaurátorského zásahu. Součástí této práce je také fotografická dokumentace.T: This work aims to follow upmap the stone sculpture work of Martin Krupka from East Bohemia. It will concentratewill concentrate on a range of stillyet unknown art works, which were created at in the region of the Šlik Dominion of Šlik at surroundings of Veliše and Kopidlnao and will specify Krupka´s the creation ofwork Krupka within the context with of a group of woodcarvings in the interier interior of the St. Wenceslas church Church of St. Wenceslas atin Veliš and a group of stone sculptures in front of the samethis church. A substanceThe center point of this work will be a description of sculpture sculptural procedures, compositions and the other aspects of Krupka´s work in 1750 - 1775. P: The thesis describes and documents the conservation and restoration intervention undertaken on St. Johan of Nepomuk stone sculpture from Kostelec. In individual points The history of the relic including a reflection of its artistic value as well as the iconography of the Saint is described history of the relic, iconography of the Saint in individual pointsinclusive of reflection on art value of the relic. Further, the state of the relic prior restoration is described, including complete chemical chemical-technological resarch and description of individual steps of restoration intervention there. Photographic documentation forms the final. A part of the work is also photograqphic documentation.Katedra humanitních věd FRDokončená práce s úspěšnou obhajobo

    Illuminaçao Apologetica do retrato de Morteçor en que aparecem com mais vivas côres os erros do author do novo Methodo, e seu Apologista ...

    No full text
    Fecha sacada de la pág.2 y 159Sign.: A-V\p4\sError tipográfico de signatura : a B\b2\s llama B\b3\

    Going Beyond Counting First Authors in Author Co-citation Analysis

    Get PDF
    The present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed

    Marketingová strategie multinacionálních společností na čínském trhu

    No full text
    Hlavním cílem diplomové práce je detailně identifikovat čínský trh a čínského spotřebitele z pohledu mezinárodního a strategického marketingu. Čína je jeden z nejmocnějších a nejrychleji se rozvíjejících trhů na světě. Patří mezi tzv. státy BRIC/BRIICS. Jelikož ekonomicky se Čína velice rychle a znatelně vzmáhá, stala se velice zajímavým trhem pro mnoho mezinárodních a multinacionálních společností, kam mohou rozšířit své podnikatelské aktivity a záměry. Mým cílem bylo zanalyzovat hlavní aspekty čínského trhu, které přímo ovlivňují marketingové strategie mezinárodních a multinacionálních společností. Dále také porozumět a pochopit čínského zákazníka a jeho potřeby a preference. Mnoho mezinárodních společností vstupují na čínský trh, protože vidí silný kupní potenciál v 1,4 miliardě čínských spotřebitelů. Čínští spotřebitelé jsou velice specifičtí, zejména tím, že se čím dál tím více podobají západním spotřebitelům, protože bohatnout, ale stále si rovněž udržují své tradiční zvyklosti, které se projevují v jejich nákupním chování. Společnosti typu Unilever a P&G jsou příklady úspěšných multinacionálních FMCG společností, které výrazně uspěli na čínském trhu.The main goal of this master thesis is to identify the Chinese market and its consumer from the perspective of international and strategic marketing. China is one the most powerful and fastest growing market in the world belonging to the group of BRIC/BRIICS countries. As the economic development is growing, China has become an interesting market for many international and multinational companies where to spread their business activities. My aim is to analyze the main aspects of the Chinese market which directly influence the marketing strategy of the companies and understand the market's consumers' needs and preferences. A lot of international companies enter the Chinese market as they see a potential in 1,4 billion consumers living there. Chinese consumers are very specific. They become similar to the Western consumers as they have become richer but they still keep their traditional habits with their preferences. Unilever and P&G are examples of companies that succeeded in the Chinese market

    Universal Statistical Properties of Inertial-particle Trajectories in Three-dimensional, Homogeneous, Isotropic, Fluid Turbulence

    No full text
    We obtain new universal statistical properties of heavy-particle trajectories in three-dimensional, statistically steady, homogeneous, and isotropic turbulent flows by direct numerical simulations. We show that the probability distribution functions (PDFs) P(Φ), of the angle Φ between the Eulerian velocity u and the particle velocity v, at a point and time, scales as P(Φ) ∼Φ−, with a new universal exponent ≃ 4

    Ca/P bioactive layers on titanium alloys

    Get PDF
    Bakalářská práce na téma Ca/P bioaktivní povlaky na titanových slitinách shrnuje současné poznání v oblasti bioaktivních materiálů, zejména titanových slitin. A jejich úpravy povrchů a využití povrchových vrstev pro dosažení zvýšení bioaktivity, osteointegrace a dosažení lepší adheze pro následný bioaktivní povlak. Jeho způsoby výroby a metoda nanášení. Zvláště pak Ca/P povlaky a hydroxiapatit. Dále se práce zabývá vlastní výrobou Ca/P povlaku metodou vaření a máčení v simulované tělní tekutině na slitinách CP Ti, Ti6Al4V a Ti39Nb. Závěr práce tvoří porovnání metod nanášení pro jednotlivé slitiny a přínos anodické oxidace na stimulaci depozice bioaktivního povlaku.The bachelor thesis on subject Ca / P bioactive coatings on titanium alloys summarizes current knowledge in the field of bioactive materials, especially titanium alloys. Their surface treatments and use of surface layers to increase bioactivity, osteointegration and to achieve better adhesion for subsequent bioactive coating. Its production and application methods. Especially Ca/P coatings and hydroxiapatite. The thesis also deals with the production of Ca/P coating by the method of cooking and soaking in simulated body fluid on CP Ti, Ti6Al4V and Ti39Nb alloys. Conclusion of this work is comparison of deposition methods for individual alloys and contribution of anodic oxidation to stimulation of deposition of bioactive coating
    corecore