1,720,999 research outputs found
Trimming of silicon-on-insulator ring-resonators via localized laser annealing
We propose a post-fabrication trimming method for the silicon-on-insulator photonic platform based on localised laser annealing of hydrogen silsesquioxane (HSQ) cladding. The technique is fast, does not degrade the device performance, does not require additional fabrication steps, and can therefore be implemented at minimal cost. Here we experimentally demonstrated how the spectrum of a ring resonator can be shifted by over 1 nm by annealing a section of the device as short as 30 µm, corresponding to a change in the effective refractive index of ∼10−2. Modifications of both the HSQ refractive index and its chemical structure as a function of the annealing temperature are also discussed. Trimming of multi-ring resonators indicate that this technique can be effectively used for post-fabrication reconfiguration of complex photonic circuits or to compensate for the fabrication tolerances of a typical CMOS process
Active on-chip dispersion control using a tunable silicon Bragg grating
Actively controllable dispersion in on-chip photonic devices is challenging to implement compared with free space optical components where mechanical degrees of freedom can be employed. Here, we present a method by which continuously tunable group delay control is achieved by modulating the refractive index profile of a silicon Bragg grating using thermo-optic effects. A simple thermal heater element is used to create tunable thermal gradients along the grating length, inducing chirped group delay profiles. Both effective blue and red chirp are realised using a single on-chip device over nanometre scale bandwidths. Group delay slopes are continuously tunable over a few ps/nm range from red to blue chirp, compatible with on-chip dispersion compensation for telecommunications picosecond pulse systems
Going Beyond Counting First Authors in Author Co-citation Analysis
The present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Compact amorphous-silicon visible-light monitor integrated in silicon nitride waveguides
This work reports on the realization of an amorphous silicon visible-light detector integrated in Si3N4 waveguides. The device is very compact (< 40 μm), has a responsivity of about 10 mA/W and a sensitivity of -40 dBm
Variations on the Author
“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
High-extinction-ratio TE/TM selective Bragg grating filters on silicon-on-insulator
We report on the design and fabrication of TE and TM polarization selective Bragg grating filters in the form of sinusoidal perturbations on the waveguide sidewall and etched holes on the top of the waveguide, respectively. Combining the two geometries on a silicon-on-insulator waveguide resulted in Bragg grating filters with high extinction ratios of approximately 60 dB
Appropriate Similarity Measures for Author Cocitation Analysis
We provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Hybrid integration of an evanescently coupled AlGaAs microdisk resonator with a silicon waveguide by nanoscale-accuracy transfer printing
Hybrid integration of a III-V microdisk resonator on a silicon-on-insulator waveguide platform is demonstrated. Transfer printing with nanoscale accuracy is used to micro-assemble an evanescently coupled all-pass microdisk resonator with a targeted coupler gap of 100 nm using pre-fabricated AlGaAs and silicon components. Transmission measurements show hybrid resonances with a loaded Q-factor of 7×103 and a cavity finesse of over 100
Silicon photonic filters with high rejection of both TE and TM modes for on-chip four wave mixing applications
Wavelength selective filters represent one of the key elements for photonic integrated circuits (PIC) and many of their applications in linear and non-linear optics. In devices optimised for single polarisation operation, cross-polarisation scattering can significantly limit the achievable filter rejection. An on-chip filter consisting of elements to filter both TE and TM polarisations is demonstrated, based on a cascaded ring resonator geometry, which exhibits a high total optical rejection of over 60 dB. Monolithic integration of a cascaded ring filter with a four-wave mixing micro-ring device is also experimentally demonstrated with a FWM efficiency of -22dB and pump filter extinction of 62dB
- …
