1,720,955 research outputs found
Thermo-mechanical fatigue lifetime assessment of spheroidal cast I\iron at different thermal constraint levels
No full textIn previous work on the thermo-mechanical fatigue (TMF) of compacted graphite iron (CGI), lifetimes measured under total constraint were confirmed analytically by numerical integration of Paris’ crack-growth law. In current work, the results for CGI are further validated for spheroidal cast iron (SGI), while TMF tests at different constraint levels were additionally performed. The Paris crack-growth law is found to require a different CParis parameter value per distinct constraint level, indicating that Paris’ law does not capture all physical backgrounds of TMF crack growth, such as the effect of constraint level. An adapted version of Paris’ law is developed, designated as the local strain model. The new model considers cyclic plastic strains at the crack tip to control crack growth and is found to predict TMF lifetimes of SGI very well for all constraint levels with a single set of parameters. This includes not only full constraint but also over and partial constraint conditions, as encountered in diesel engine service conditions. The local strain model considers the crack tip to experience a distinct sharpening and blunting stage during each TMF cycle, with separate contributions to crack-tip plasticity, originating from cyclic bulk stresses in the sharpening stage and cyclic plastic bulk strains in the blunting stage.Emerging Materials(OLD) MSE-3(OLD) MSE-
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
A Comparative Study of Thermo-Mechanical Fatigue Performance of Different Grades of SiMo Nodular Cast Iron
No full textThis thesis is a comparative study of the Thermo-Mechanical Fatigue (TMF) performance of different grades of SiMo nodular cast iron for heavy-duty diesel engine exhaust gas manifold applications. The TMF performance of the current SiMo variant used to manufacture exhaust manifolds - SiMo 5.10 (C-3.25Si-4.45Mo-0.76), is compared with that of the variants SiMo 4.05 (C-3.22Si-4.66Mo-0.56) and SiMoNi (C-3.3Si-4.5Mo-1Ni-1.3) by performing three out-of-phase (OP) TMF test series under partial constraint conditions. A benchmark TMF test series in the temperature range: 50 ˚C to 550 ˚C with a hold time of 30 s at 550 ˚C showed that SiMo 5.10 had relatively better performance due to development of lower mechanical crack driving forces compared to other variants. However, a long holding time of 600 s at 550 ˚C saw a larger decrease of average TMF lifetimes for SiMo 5.10 than that of SiMo 4.05 despite similar crack driving forces. An investigation of the stress relaxation during TMF of the two variants showed that the SiMo 4.05 performs better during long hold time due to better stress relaxation properties. The SiMoNi variant which is very brittle at low temperatures was found to fail by a fracture by overloading mechanism taking over quite early in the fatigue cycle; which is confirmed by examination of the fracture surfaces and numerical estimations. This also explained the low lifetimes and scatter in previously performed TMF tests under total constraint conditions. The TMF test series performed in the temperature range: 150 ˚C to 550 ˚C with a hold time of 30 s at 550 ˚C found that a heat-treatment seemed to reduce the TMF performance of the SiMo 5.10 variant. Metallographic investigations and hardness measurements of as-cast and heat-treated materials revealed that the distribution of the Mo-rich phase from the grain boundary regions into the matrix due to an annealing heat-treatment seemed to affect the TMF performance.Materials Science and Engineerin
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
Author-wise bibliometric analysis based on entropy.
No full textAuthor-wise bibliometric analysis based on entropy.</p
- …
