1,721,320 research outputs found
Structural assessment of the gripper interlock of the DEMO breeding blanket transporter
Full text linkThe maintenance of the DEMO Breeding Blanket (BB) remotely is a crucial aspect in development of the DEMO power plant. It is a challenge due to the huge mass of the BB segment of about 180 tons. A new concept for the BB transporter has recently been developed. To properly grip and manipulate each BB segment, the BB transporter has been equipped with a gripper interlock. Due to the geometry of the BB and the vacuum vessel, the attachment point on the BB segment is not aligned with its center of gravity. Hence in addition to the vertical lifting load, large moments about the horizontal axes need to be reacted.The work discussed here concerns the structural analysis conducted on the gripper interlock; its structural integrity has been checked against the most severe load conditions that include also seismic loads according to the EN13001. Elastic analyses were performed using a finite element model in accordance with EN 13001-3-1:2012 + A2:2018, Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure. The effect of the gap sizes at the contact surfaces between gripper interlock and BB after engagement as well as the effect of different friction coefficients on the sliding areas were assessed. The improvements of the design based on the structural analysis are presented, too
Conceptual study of the remote maintenance of the DEMO breeding blanket
Full text linkThe development of a remote maintenance concept to replace DEMO in-vessel components after completion of their lifecycle or in case of failure is fundamental to the successful implementation of the EU fusion roadmap. The replacement of the hot breeding blanket (BB), by far the largest in-vessel component, at the end of its lifecycle is particularly important. This includes the removal from the reactor, the transport to the active maintenance facility (AMF) where the BB is decontaminated and prepared for storage as radioactive waste and the preparation and installation of the new BB. Significant effort is made to control and minimize the spread of contamination. All operations are therefore carried out in sealed rooms and corridors. The high mass of the BB segments requires all remote handling equipment to be capable of handling high payloads of more than 100 tons. It must also operate within tight space and based on impaired feedback from control sensors in the radioactive environment. At the same time, it must be highly reliable in accordance with nuclear requirements and be recoverable in case of failure. Some concepts of BB lifting devices were investigated in the past (Keep et al., 2017), but were discontinued due to insufficient payload capacity. Thus, the vertical maintenance of the BB was identified as one of DEMO's key design integration issues since failure to develop a feasible concept would potentially require major changes to the tokamak architecture (Bachmann et al., 2020). A new study had been initiated with a focus on structural integrity and efficient load transfer from the BB through the RH equipment to the VV upper port. A concept of the BB transfer cask and the BB transporter resulting from this study is presented in this article together with a conceptual study of the layout of the tokamak building and the AMF. Studies of alternative concepts for in-vessel maintenance are conducted in parallel but will not be described here
Design of the gripper interlock that engages with the DEMO breeding blanket during remote maintenance
Full text linkThe DEMO breeding blanket (BB) must be replaced during the machine lifetime due to the material degradation caused by the neutron irradiation. The large BB segments can therefore be removed through the upper ports of the vacuum vessel by a remotely operated transporter. The size of these ports is however restricted by the magnetic coils causing some of the BB segments to be accessible only on their extremities. The lifting point of these BB segments therefore is away from their centers of gravity also requiring the transfer of bending moments. A concept of the BB transporter was developed recently [1]. It has the required payload capacity and is capable of carrying out also the tilting maneuvers required to extract the BB segments from the VV. The gripper interlock is the interface to the BB segments and is described in this article including the function of its locking mechanism. It has the tightest space constraints of all BB transporter components, and its design is particularly challenging given the large loads to be transferred. The basic concept of the gripper interlock resembles a massive pin with a diameter of approximately 500 mm that is inserted into a countersunk hole in the backside of the BB segment and then locked by an actuated mechanism. The concept allows on the one hand the transfer of large bending mo-ments. The engagement is on the other hand more challenging as compared to the hook of a conventional crane that is required to transfer vertical loads only. In addition the gripper interlock must be designed according to the rules defined for lifting equipment in nuclear power plants and considering increased requirements regarding qualification and in-service inspection since its failure can cause a load drop with the potential to damage the primary confinement
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
