306,212 research outputs found
Variation aware analysis of bridging fault testing
No full textThis paper investigates the impact of process variation on test quality with regard to resistive bridging faults. The input logic threshold voltage and gate drive strength parameters are analyzed regarding their process variation induced influence on test quality. The impact of process variation on test quality is studied in terms of test escapes and measured by a robustness metric. It is shown that some bridges are sensitive to process variation in terms of logic behavior, but such variation does not necessarily compromise test quality if the test has high robustness. Experimental results of Monte-Carlo simulation based on recent process variation statistics are presented for ISCAS85 and -89 benchmark circuits, using a 45nm gate library and realistic bridges. The results show that tests generated without consideration of process variation are inadequate in terms of test quality, particularly for small test sets. On the other hand, larger test sets detect more of the logic faults introduced by process variation and have higher test quality
Process variation-aware test for resistive bridges
No full textThis paper analyses the behaviour of resistive bridging faults under process variation and shows that process variation has a detrimental impact on test quality in the form of test escapes. To quantify this impact, a novel metric called test robustness is proposed and to mitigate test escapes, a new process variation-aware test generation method is presented. The method exploits the observation that logic faults that have high probability of occurrence and correspond to significant amounts of undetected bridge resistance have a high impact on test robustness and therefore should be targeted by test generation. Using synthesised ISCAS benchmarks with realistic bridge locations, results show that for all the benchmarks, the method achieves better results (less test escapes) than tests generated without consideration of process variatio
Going Beyond Counting First Authors in Author Co-citation Analysis
No full textThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Dispelling the Myths Behind First-author Citation Counts
No full textWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
Bridging fault test method with adaptive power management awareness
No full textA key design constraint of circuits used in handheld devices is the power consumption, mainly due to battery life limitations. Adaptive power management (APM) techniques aim to increase the battery life of such devices by adjusting the supply voltage and operating frequency, and thus the power consumption, according to the workload. Testing for resistive bridging defects in APM-enabled designs raises a number of challenges due to their complex analog behavior. Testing at more than one supply voltage setting can be employed to improve defect coverage in such systems, however, switching between several supply voltage settings has a detrimental impact on the overall cost of test. This paper proposes a multi-Vdd automatic test generation method which delivers 100% resistive bridging defect coverage and also a way of reducing the number of supply voltage settings required during test through test point insertion. The proposed techniques have been experimentally validated using a number of benchmark circuits
Investigation into voltage and process variation-aware manufacturing test
No full textIncreasing integration and complexity in IC design provides challenges for manufacturing testing. This thesis studies how process and supply voltage variation influence defect behaviour to determine the impact on manufacturing test cost and quality. The focus is on logic testing of static CMOS designs with respect to two important defect types in deep submicron CMOS: resistive bridges and full opens. The first part of the thesis addresses testing for resistive bridge defects in designs with multiple supply voltage settings. To enable analysis, a fault simulator is developed using a supply voltage-aware model for bridge defect behaviour. The analysis shows that for high defect coverage it is necessary to perform test for more than one supply voltage setting, due to supply voltage-dependent behaviour. A low-cost and effective test method is presented consisting of multi-voltage test generation that achieves high defect coverage and test set size reduction without compromise to defect coverage. Experiments on synthesised benchmarks with realistic bridge locations validate the proposed method.The second part focuses on the behaviour of full open defects under supply voltage variation. The aim is to determine the appropriate value of supply voltage to use when testing. Two models are considered for the behaviour of full open defects with and without gate tunnelling leakage influence. Analysis of the supply voltage-dependent behaviour of full open defects is performed to determine if it is required to test using more than one supply voltage to detect all full open defects. Experiments on synthesised benchmarks using an extended version of the fault simulator tool mentioned above, measure the quantitative impact of supply voltage variation on defect coverage.The final part studies the impact of process variation on the behaviour of bridge defects. Detailed analysis using synthesised ISCAS benchmarks and realistic bridge model shows that process variation leads to additional faults. If process variation is not considered in test generation, the test will fail to detect some of these faults, which leads to test escapes. A novel metric to quantify the impact of process variation on test quality is employed in the development of a new test generation tool, which achieves high bridge defect coverage. The method achieves a user-specified test quality with test sets which are smaller than test sets generated without consideration of process variation
Author, publisher and bookseller : a tripartite synergy in Nigerian book industry
No full textThis work is about the roles of Author, Publisher and Bookseller in Book development in
Nigeria. The paper started by delving into the history of Book Publishing in Nigeria after
which it proceeded by defining who an author, a publisher, and a bookseller is and
expatiated on the indispensable roles of these key actors in Nigerian Book Industry and in
the emerging Information Society. Furthermore, the various constraints to book
development were identified while the paper advised on how the Book Industry can be
further promoted in Nigeria. However, the paper concluded and made recommendations
on how the Book sector can help in enhancing scholarship in the country
[Report to Chief J. E. Curry, by an unknown author #2]
No full textReport to Chief J. E. Curry, by an unknown author. The report contains a list of officers who gave depositions to the United States Attorney
[Report to Chief J. E. Curry, by an unknown author #1]
No full textReport to Chief J. E. Curry, by an unknown author. The report contains a list of officers who gave depositions to the United States Attorney
- …
